Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.pmu_init_perfmon = nvgpu_pmu_init_perfmon_rpc,
.pmu_perfmon_start_sampling = nvgpu_pmu_perfmon_start_sampling_rpc,
.pmu_perfmon_stop_sampling = nvgpu_pmu_perfmon_stop_sampling_rpc,
.pmu_perfmon_get_samples_rpc = nvgpu_pmu_perfmon_get_samples_rpc,
These were being called by:
g->ops.pmu.pmu_init_perfmon,
g->ops.pmu.pmu_perfmon_start_sampling,
g->ops.pmu.pmu_perfmon_stop_sampling,
g->ops.pmu.pmu_perfmon_get_samples_rpc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_perfmon_init(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_start_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_stop_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_get_samples_rpc_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
and based on hardware chip call the chip specific
perfmon sw init function: nvgpu_gv11b_perfmon_sw_init() and
nvgpu_gv100_perfmon_sw_init() and assign the sw ops for perfmon
JIRA NVGPU-3210
Change-Id: I2470863f87a7969e3c0454fa48761499b08d445c
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109899
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gv11b MMU fault handling code into a new mm.mmu_fault HAL.
Also move the existing gmmu_mmu_fault HAL code into this HAL as they
are basically the same logical entity.
JIRA NVGPU-2042
JIRA NVGPU-1313
Change-Id: I41d3e180c762f191d4de3237e9052bdc456f9e4c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the get_litter() functions out of the main hal init to its own
source file for each device. This allows removal of the hw_proj_*.h
files in the main hal init file. This reduces the number of hw header
includes per file creating better code isolation.
JIRA NVGPU-3274
Change-Id: I9e04294434acf274ccc2236646f0f15f710a6976
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2107751
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create a new unit common.fbp which initializes fbp support and provides
APIs to retrieve fbp data.
Create private header with below data
struct nvgpu_fbp {
u32 num_fbps;
u32 max_fbps_count;
u32 fbp_en_mask;
u32 *fbp_rop_l2_en_mask;
};
Expose below public APIs to initialize/remove fbp support:
nvgpu_fbp_init_support()
nvgpu_fbp_remove_support()
vgpu_fbp_init_support() for vGPU
Expose below APIs to retrieve fbp data
nvgpu_fbp_get_num_fbps()
nvgpu_fbp_get_max_fbps_count()
nvgpu_fbp_get_fbp_en_mask()
nvgpu_fbp_get_rop_l2_en_mask()
Use above APIs to retrieve fbp data in all the code.
Remove corresponding fields from struct nvgpu_gr since they are no
longer referred from that structure
Jira NVGPU-3124
Change-Id: I027caf4874b1f6154219f01902020dec4d7b0cb1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108617
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
channel.c calling nvgpu_gr_flush_channel_tlb() creating circular
dependency between gr and fifo. Avoid this by moving channel tlb
related data to struct nvgpu_gr_intr in gr_intr_priv.h and
initialized this data in gr_intr.c.
Created following new gr intr hal and called this new hal from channel.c
void (*flush_channel_tlb)(struct gk20a *g);
JIRA NVGPU-3214
Change-Id: I2d259bf52db967273030680f50065af94a17f417
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109274
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There are many miscellaneous HALs for various MM related functionality.
This patch aims to migrate all the remaining MM code from the <chip>/
mm_<chip>.[ch] files in HAL files under hal/.
Much of this is fairly straightforward copy/paste and updates to the
HAL init files.
The exception to that is the move of the left over gv11b MMU fault
handling code in mm_gv11b.c. Having both a hal/mm/mm/mm_gv11b.c and
a gv11b/mm_gv11b.c file causes tmake to choke so the gv11b/mm_gv11b.c
file was moved to gv11b/mmu_fault_gv11b.c. This will be cleaned up in
a subsequent patch.
JIRA NVGPU-2042
Change-Id: I12896de865d890a61afbcb71159cff486119ffb8
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed
- gk20a_tsg_set_runlist_interleave -> nvgpu_tsg_set_interleave
Moved set_interleave from runlist to tsg
- runlist.set_interleave -> tsg.set_interleave
Existing HAL was only setting tsg->interleave, and was not
accessing any register. This is now done in nvgpu_tsg_set_interleave
and tsg.set_interleave is only used in vgpu case.
Jira NVGPU-3156
Change-Id: I5dac1305afcbd950214316289cf704ee8b43fc89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100610
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg
- set_timeslice
- default_timeslice_us
Renamed
- gk20a_tsg_set_timeslice -> nvgpu_tsg_set_timeslice
- min_timeslice_us -> tsg_timeslice_min_us
- max_timeslice_us -> tsg_timeslice_max_us
Scale timeslice to take into account PTIMER clock in
nvgpu_runlist_append_tsg.
Removed gk20a_channel_get_timescale_from_timeslice, and
instead moved timeout and scale computation into runlist HAL,
when building TSG entry:
- runlist.get_tsg_entry
Use ram_rl_entry_* accessors instead of hard coded values
for default and max timeslices.
Added #defines for min, max and default timeslices.
Jira NVGPU-3156
Change-Id: I447266c087c47c89cb6a4a7e4f30acf834b758f0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100052
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently max_css_buffer_size is incorrectly stored in struct nvgpu_gr
Add a new hal g->ops.css.get_max_buffer_size() to get the size and
remove the variable from struct nvgpu_gr
Jira NVGPU-3125
Change-Id: If78fd86559526b84031051e281a98327a46fc11d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gk20a_init_mm_setup_hw to common code. This function just
calls HALs to initialize various bits of HW. However, since this
code assumes that (some of) the HALs are present this code is treated
as a vGPU HAL (that is it's NULL for vGPU).
This patch also renames the MM HW init HAL.
Sicne the gv11b variant of this setup_hw HAL did have some differences
from the gk20a version the new common version required some work. The
gv11b code was copied into the common function but now the gv11b
specific calls were HAL'ified (since they will need to be anyway for
the MMU fault buf code) and protected by an if-condition.
JIRA NVGPU-2042
Change-Id: I959293394ee8793923d858ee37b7ce346096654f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104541
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the remaining GMMU HAL related code from the gm20b/, gp10b/,
and gv11b/ directories to new gmmu hal source files.
Also update all makefiles and HAL init code to refelct the new
location of the headers and source code.
JIRA NVGPU-2042
Change-Id: Ic9b85cc547bd0f994ad11042fc4093c517327399
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103672
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific recovery code for volta onwards
architecture to hal/rc/rc_gv11b.c
Rename
fifo.teardown_ch_tsg -> fifo.recover
gk20a_runlist_update_locked -> nvgpu_runlist_update_locked
Remove
Unused h/w headers from fifo_gv11b.c
Use local variable f instead of g->fifo
JIRA NVGPU-1314
Change-Id: Ia535bbe4780e7241fdd911a8f577c6b98cf0fe53
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102897
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gr_gk20a_handle_fecs_error from gr_gk20a.c to
nvgpu_gr_intr_handle_fecs_error in common.gr.intr unit
Move gr_gp10b_handle_fecs_error and gr_gv11b_handle_fecs_error
to hal.gr.intr unit
JIRA NVGPU-3016
Change-Id: I5b7c48ebfd7b13f497980c4d0b64d718649154bd
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103741
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gr_gp10b_handle_sm_exception from gr_gp10b to
gp10b_gr_intr_handle_sm_exception in hal.gr.intr unit
Move gr_gk20a_handle_sm_exception from gr_gk20a to
nvgpu_gr_intr_handle_sm_exception in common.gr.intr
Move nvgpu_report_gr_sm_exception to common.gr.intr
JIRA NVGPU-3016
Change-Id: I545ddca052122f87685f35f515831841a246dab3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make a hal/mm/gmmu sub-unit for the GMMU HAL code. Also move the
gk20a specific HAL code there. gp10b will happen in the next patch.
This change also updates all the GMMU related HAL usage, of which
there is quite a bit. Generally the only change is a .gmmu needs to
be inserted into the HAL path. Each HAL init was also updated.
JIRA NVGPU-2042
Change-Id: I6c46bdfddb8e021f56103d9457fb3e2a226f8947
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.get_preemption_mode_flags() hal is used to fetch information
on supported preemption modes and default preemption mode
Temporary struct nvgpu_preemption_modes_rec is used for this purpose
and is defined in gk20a/gr_gk20a.h right now.
Split above hal into two separate hals and move them to hal.gr.init unit
g->ops.gr.init.get_supported__preemption_modes()
g->ops.gr.init.get_default_preemption_modes()
These hals now return respective flags in pointers passed in function
parameter list, so there is no need to use temporary structure anymore
Hence delete struct nvgpu_preemption_modes_rec
Implement gm20b/gp10b chip specific hals in hal.gr.init unit.
Delete g->ops.gr.get_preemption_mode_flags() hal
Jira NVGPU-3126
Change-Id: I84f507fcd8d122bb7f0ecf697e8b4f16c9339ce1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102455
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Basic units like fifo, rc are having dependency on
gr_falcon. Avoided outside gr units dependency on gr_falcon
by moving following functions to gr:
int nvgpu_gr_falcon_disable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_disable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_enable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_enable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_halt_pipe(struct gk20a *g); ->
int nvgpu_gr_halt_pipe(struct gk20a *g);
HALs also moved accordingly and updated code to reflect this.
Also moved following data back to gr from gr_falcon:
struct nvgpu_mutex ctxsw_disable_mutex;
int ctxsw_disable_count;
JIRA NVGPU-3168
Change-Id: I2bdd4a646b6f87df4c835638fc83c061acf4051e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100009
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific preempt code to hal/fifo
Move non-chip specific preempt code to common/fifo
Remove fifo.get_preempt_timeout
Rename gk20a_fifo_get_preempt_timeout -> nvgpu_preempt_get_timeout
Rename gk20a_fifo_preempt -> nvgpu_preempt_channel
Add fifo.preempt_trigger hal for issuing preempt
Add fifo.preempt_runlists_for_rc hal for preempting runlists during rc
Add fifo.preempt_poll_pbdma hal
Add nvgpu_preempt_poll_tsg_on_pbdma to be called from rc
JIRA NVGPU-3144
Change-Id: Idb089acaa0c6ca08de17487c3496459a61f0bcd4
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100819
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gfxp_wfi_timeout_count/unit fields were stored in gr_gk20a.ctx_vars
struct so that any user could configure them through sysfs nodes
But the sysfs nodes are legacy and not being actively used by anyone.
Hence delete the sysfs nodes to configure these fields.
Since the gfxp timeout unit/count can now be statically programmed,
make following changes
- remove g->ops.gr.init_gfxp_wfi_timeout_count() hal
- remove g->ops.gr.get_max_gfxp_wfi_timeout_count() hal
- update g->ops.gr.init.preemption_state() hals to configure the values
using macros instead of caller passing the values
- update g->ops.gr.init.gfxp_wfi_timeout() hals to configure the values
using macros instead of caller passing the values
Finally, we don't need to store gfxp_wfi_timeout_count/unit fields
anymore, hence delete them from gr_gk20a.ctx_vars
Jira NVGPU-3112
Change-Id: Idbe5ab3053228dd177aca253545aac36d38ca8ad
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Unify qnx types unit with posix. Modify certain defines as part of
unification. Modify the fecs trace function mmap_user_buffer to
not have OS specific structure as parameter. Rename the function
pointer mmap_user_buffer as get_mmap_user_buffer_info to reflect the
functionality handled by the function.
Jira NVGPU-2146
Change-Id: I58ec9bf23a435c039d1b5f04194f56067b11aa28
Signed-off-by: ajesh <akv@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2082619
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to usermode
- fifo.ring_channel_doorbell -> usermode.ring_doorbell
- fifo.doorbell_token -> usermode.doorbell_token
- fifo.usermode_base -> usermode.base
Created the following HAL
- usermode.setup_hw
Jira NVGPU-2978
Change-Id: I856ea24c126fa22d2f3fe860d4b14087c6d7330b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.detect_sm_arch() in hal.gr.init unit to get
SM arch information. Remove g->ops.gr.detect_sm_arch().
Move corresponding functions to hal.gr.init unit
Remove unused function declaration for gr_gv11b_init_sw_veid_bundle()
Jira NVGPU-2961
Change-Id: Idfd5ce19c06978dc31cbcec2cd01cb2912eb3cf9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2097534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_gr_setup_free_subctx() in common.gr.ctx to free subctx
Call this via hal g->ops.gr.setup.free_subctx()
Subctx allocations happens through gr.setup api right now hence it makes
sense to provide subctx free api through same unit
Remove g->ops.channel.free_ctx_header() hal since we now have gr.setup
hal
Remove gv11b/subctx_gv11b.* files since they are no longer needed and
all the code in them has been moved to common units
Jira NVGPU-1886
Change-Id: I3d58fc3665ed9b6ffba830249a4cd30af7b857f4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094994
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move get_nonpes_aware_tpc hal to hal.gr.init . This hal is
implemented for gv11b.
Update sm_id_numbering hal to pass the gr_config struct pointer
as parameter to avoid dereferencing from gr inside hal.
JIRA NVGPU-2951
Change-Id: I1e06b634cc36741e116e41e581a18c7f5b373945
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093835
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created class unit under hal and moved all valid class check related
functionality to this unit. Moved all class defs from gr to a new header
include/nvgpu/class.h.
Moved following hals from gr to newly created class unit:
bool (*is_valid_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid)(u32 class_num);
bool (*is_valid_gfx_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_gfx)(u32 class_num);
bool (*is_valid_compute_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_compute)(u32 class_num);
JIRA NVGPU-3109
Change-Id: I01123e9b984613d4bddb2d8cf23d63410e212408
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095542
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create common/fifo/pbdma.c and move pbdma common code:
- nvgpu_pbdma_setup_sw
- nvgpu_pbdma_cleanup_sw
- nvgpu_pbdma_find_for_runlist
- nvgpu_pbdma_init_intr_descs
Moved the following HAL from fifo to pbdma
- fifo.find_pbdma_for_runlist -> pbdma.find_for_runlist
Added the following HALs
- fifo.init_pbdma_map
- pbdma.setup_sw
- pbdma.cleanup_sw
Jira NVGPU-2950
Change-Id: I17802ee61de669c3e17792b4505efb5e2bf530d3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved
-mmu_fault_pending mm ops to is_mmu_fault_pending mc ops
-mmu_fault_pending fb ops to is_mmu_fault_pending fb.intr ops. This
is needed to check if mmu fault intr is pending for volta onwards.
Added
is_mmu_fault_pending fifo ops. This is needed to check if mmu fault
interrupt is pending for chips prior to volta
JIRA NVGPU-1313
Change-Id: Ie8e778387cd486cb19b18c4aee734c581dcd9229
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
