common.ptimer unit right now exposes two APIs -
scale_ptimer() to scale the timer
ptimer_scalingfactor10x() to get the scaling factor
receiving scaling factor is not really necessary for user of
common.ptimer since it can be internally calculated in scale_ptimer()
function itself.
Hence make ptimer_scalingfactor10x() static and rename public API
scale_ptimer() to nvgpu_ptimer_scale()
nvgpu_ptimer_scale() will not accept timeout value as parameter
and return scaled timeout value in another pointer parameter.
Error code is returned if timeout value is invalid.
Jira NVGPU-6394
Change-Id: Ib882d99f6096c3af5f96eef298d713fb5e36dd87
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2546970
(cherry picked from commit 2da7c918efe91046818c83481664312e194ead8e)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. misra_c_2012_rule_8_6_violation: "gm20b_gr_init_fe_go_idle_timeout"
is declared but never defined.
Fix by adding config CONFIG_NVGPU_HAL_NON_FUSA for header declaration
of "gm20b_gr_init_fe_go_idle_timeout"
2. misra_c_2012_rule_5_7_violation: Identifier "ops" is already used
to represent a type.
Fix by renaming local variable ops to nonstall_ops in
gm20b_gr_intr_nonstall_isr()
3. missing_default: No default case found for the switch statement
"switch (offset << 2)"
Fix by adding break and default statements to switch case in
gv11b_gr_intr_handle_sw_method()
Jira NVGPU-6779
Change-Id: I8df097ec66479edcd2e81bf46bab5b5db52ac8c8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2541246
(cherry picked from commit c4d9fe0449f8c6ee209051abfe58c6f3a745808d)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2543012
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Query the num_perfmon requires golden context to be ready. Accessing
golden context might require gr_instance_id, specific to a GR engine.
On TOT, get_num_hwpm_perfmon() called from perfmon HAL which might
require to call nvgpu_gr_exec_with_err_for_instance().
It internally calls nvgpu_grmgr_config_gr_remap_window() to change
gr_window_remap register points to a current gr_instance_id for MIG.
This approach indirectly mandates to call
nvgpu_gr_exec_with_err_for_instance() which can be
completely avoided. get_num_hwpm_perfmon() is just a query call
which can be moved after the golden context creation.
Using this logic, we can avoid unnecessary invocation of
nvgpu_gr_exec_with_err_for_instance() during perform specific
HAL accesses.
1) Moved get_num_hwpm_perfmon() after golden context creation.
2) Added nvgpu_assert() if (g->num_sys_perfmon == 0U).
JIRA NVGPU-5656
Change-Id: I59a6ab4df93763adbc0765fa5e4d1712b2477521
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542438
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gv11b_mm_mmu_fault_handle_mmu_fault_refch() right now checks/sets
mmu_nack_handled flag for MMU faults from all clients (i.e. GPC/HUB).
Handling of MMU nack in MMU fault handling path is only needed if MMU
nack exception is triggered by SM in GPC. Hence set and check this flag
only if source client is GPC.
In certain cases it is possible that CE engine triggers back to back
MMU faults on same channel. When this happens, and because of above
incorrect mmu_nack_handled flag handling, mmu_nack_handled flag is set
while handling second MMU fault from CE.
And because of this gv11b_mm_mmu_fault_handle_mmu_fault_refch() function
could end up dropping extra channel refcounts and trigger access after
free scenarios on that channel.
Bug 3315942
Change-Id: I28d8311edf34a041364dddedb5fc3a5b83132f85
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2540497
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GFxP preemption for graphics contexts is not supported in safety.
But the support was enabled along with CONFIG_NVGPU_GRAPHICS since GFxP
preemption was protected under same config.
Add a separate config CONFIG_NVGPU_GFXP to protect all GFxP specific
code, enum values, and HALs.
Disable the config in safety profile.
Jira NVGPU-6893
Change-Id: Iebb5f754a1025dfa6e05a94704bdb8a7123b599a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2534986
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new Central Interrupt Controller(CIC) unit in common code.
The interrupt handling is done in a distributed manner currently.
The error handling policy for different errors resides in each unit's
ISR code. The goal is to converge this data under one central place -
the CIC unit.
This patch creates framework for CIC unit and moves the gv11b QNX
safety LUT to CIC unit. All the error reporting APIs from different
units are also moved to CIC.
New APIs are exposed by CIC unit to access its internal data like:
1. Struct err_desc - the static err handling /injection data per
error id
2. Num_hw_modules - the number of error reporting HW units
supported by CIC
Init and deinit of CIC unit:
1. CIC unit should be initialized earlyon during boot so that it
is available for any interrupt handling.
2. Initialize CIC just before the interrupts are enabled during
boot.
3. Similarly, CIC is disabled late during deinit cycle; right
after the interrupts are masked.
LUT:
1. LUT is currently used only for reporting error to safety
services in gv11b QNX safety build.
2. This error handling policy LUT currently has only two levels
of handing - correctable and quiecse.
3. Once, the error handling policy decision is moved from leaf
unit nodes to CIC, LUT will be updated to have additional levels
like fast recovery and full recovery.
4. Also, then a separate LUT will be added for each platform/build.
5. In current framework, the LUT is set to NULL for all
configurations except gv11b.
report_err() ops is added to report error to safety services.
This ops is only effective for gv11b qnx build; and set to NULL for
other configurations.
NVGPU-6521
NVGPU-6523
NVGPU-6750
NVGPU-6758
NVGPU-6760
NVGPU-6754
Change-Id: I24be7836a96d787741e37b732e19863ed8014635
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2518683
Reviewed-by: Ajesh K V <akv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The function gk20a_mm_l2_flush incorrectly returns an error value
when it skips l2_flush when hardware is powered off.
This causes the following prints to occur even when the behavior is expected.
gv11b_mm_l2_flush:43 [ERR] gk20a_mm_l2_flush failed
nvgpu_gmmu_unmap_locked:1043 [ERR] gk20a_mm_l2_flush[1] failed
The above errors occur from the following paths
1) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_pmu_remove_support -> nvgpu_pmu_pg_deinit ->
nvgpu_dma_unmap_free
2) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_remove_mm_support -> gv11b_mm_mmu_fault_info_mem_destroy ->
nvgpu_dma_unmap_free
Since, these do not belong in the Poweron/Poweroff path, its okay to
skip flushing them when the hardware has powered off.
Fixed the userspace tests by allocating g->mm.bar1.vm to prevent NULL access
in gv11b_mm_l2_flush->tlb_invalidate.
Jira LS-77
Change-Id: I3ca71f5118daf4b2eeacfe5bf83d94317f29d446
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2523751
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Some of the RTV circular buffer programming is under GRAPHICS config and
some is under DGPU config. For nvgpu-next, RTV circular buffer is
required even for iGPU so keeping the code under DGPU config does not
make sense.
Move all the code from DGPU config to GRAPHICS config.
Bug 3159973
Change-Id: I8438cc0e25354d27701df2fe44762306a731d8cd
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2524897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) nvgpu poweron sequence split into two stages:
- nvgpu_early_init() - Initializes the sub units
which are required to be initialized before the grgmr init.
For creating dev node, grmgr init and its dependency unit
needs to move to early stage of GPU power on.
After successful nvgpu_early_init() sequence,
NvGpu can indetify the number of MIG instance required
for each physical GPU.
- nvgpu_finalize_poweron() - Initializes the sub units which
can be initialized at the later stage of GPU power on sequence.
- grmgr init depends on the following HAL sub units,
* device - To get the device caps.
* priv_ring - To get the gpc count and other
MIG config programming.
* fb - MIG config programming.
* ltc - MIG config programming.
* bios, bus, ecc and clk - dependent module of
priv_ring/fb/ltc.
2) g->ops.xve.reset_gpu() should be called before GPU sub unit
initialization. Hence, added g->ops.xve.reset_gpu() HAL in the
early stage of dGPU power on sequence.
3) Increased xve_reset timeout from 100ms to 200ms.
4) Added nvgpu_assert() for gpc_count, gpc_mask and
max_veid_count_per_tsg for identify the GPU boot
device probe failure during nvgpu_init_gr_manager().
JIRA NVGPU-6633
Change-Id: I5d43bf711198e6b3f8eebcec3027ba17c15fc692
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2521894
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
All graphics code is under CONFIG_NVGPU_GRAPHICS and all the HALs are
in non-fusa files. In order to support graphics in safety,
CONFIG_NVGPU_GRAPHICS needs to be enabled. But since most of the HALs
are in non-fusa files, this causes huge compilation problem.
Fix this by moving all graphics specific HALs used on gv11b to fusa
files. Graphics specific HALs not used on gv11b remain in non-fusa files
and need not be protected with GRAPHICS config.
Protect call to nvgpu_pmu_save_zbc() also with config
CONFIG_NVGPU_POWER_PG, since it is implemented under that config.
Delete hal/ltc/ltc_gv11b.c since sole function in this file is moved to
fusa file.
Enable nvgpu_writel_loop() in safety build since it is needed for now.
This will be revisited later once requirements are clearer.
Move below CTXSW methods under CONFIG_NVGPU_NON_FUSA for now. Safety
CTXSW ucode does not support these methods. These too will be revisited
later once requirements are clearer.
NVGPU_GR_FALCON_METHOD_PREEMPT_IMAGE_SIZE
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_ZCULL_IMAGE_SIZE
Jira NVGPU-6460
Change-Id: Ia095a04a9ba67126068aa7193f491ea27477f882
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2513675
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated set_atomic_mode functionality from
init_fs_state/enable_nvlink and created new
fb gops for set_atomic_mode.
In gpu init sequence, set_atomic_mode is
called after acr_construct_execute to take care
of design changes required for nvgpu-next
architectures.
Updated fb_gv11b_init_test to use set_atomic_mode
gops along with init_fs_state.
Bug 3268664
Change-Id: I1ab9eb21cc4cce77f3325c4e8821a75b6e85fba2
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2508095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch is to disable the clock arbitor for TU104.
TU104 is not a POR for Drive 6.0 so disabling it to easy migration
of clk arb for GA100.
As a first step all the NVRM Clock tests will be skipped by setting
NVGPU_SUPPORT_CLOCK_CONTROLS to false for TU104.
Then clk arbitor will be rewritten for GA100 and enabled back.
This patch implements by adding a new flag NVGPU_CLK_ARB_ENABLED which
holds the status of clk arbitor for each platform and disables them for
TU104
Bug 200699763
Change-Id: I51cd5c7821bdc0b48080c17a70735925b278ddf5
Signed-off-by: absalam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2515086
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Disable access to ssync unit when MIG is enabled as ssync is
part of GR and not Compute. A runtime check is now added for the below
function.
gv11b_gr_intr_enable_hww_exceptions
The following priv errors are seen.
SYS write error: ADR 0x00405a14 WRDAT 0xc0000000 master 0x00000000
[ERR] INFO 0x19400200: (subid 0x00000019 priv_level 0 local_ordering 1)
[ERR] CODE 0xbadf1100
Jira NVGPU-6699
Change-Id: I9a08f1b6ab58affdcaa18e8ca314a4a00478a3e5
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2514761
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Introduce new HAL gops_ltc.set_l2_sector_promotion to configure L2
sector promotion policy. The follow three promotion settings are support:
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_NONE
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_64B
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_128B
Add ioctl "NVGPU_TSG_IOCTL_SET_L2_SECTOR_PROMOTION" to the gpu tsg node
to support l2 sector promotion. On chips which do not support sector
promotion, the ioctl returns 0.
Bug 200656177
Change-Id: Iad835a5c954d3b10da436cfafb388aaaa04f44c7
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460553
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add ioctl support to configure and read the max number of lines/ways
in a L2 cache set that can be marked as EVICT_LAST. This is accomplished
through two new ltc hals: set_l2_max_ways_evict_last,
get_l2_max_ways_evict_last. These hals will only be set for nvgpu-next
chips. Incase of legacy chips, the IOCTLs will return error -ENOSYS.
Generate following litter constants to get the number of sets in a l2
slice and the number of ways in each set:
- GPU_LIT_NUM_LTC_LTS_SETS
- GPU_LIT_NUM_LTC_LTS_WAYS
Add gpu characteritics flag: NVGPU_L2_MAX_WAYS_EVICT_LAST_ENABLED to
allow userspace driver to determine if L2_MAX_WAYS_EVICT_LAST ioctl is
supported.
Bug 200605474
Change-Id: Id3180f891399f5e128500f3835d762aee59953e0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2445884
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
