Add a generic profiler based on the channel kickoff profiler. This
aims to provide a mechanism to allow engineers to (more) easily profile
arbitrary software paths within nvgpu.
Usage of this profiler is still primarily through debugfs. Next up is
a generic debugfs interface for this profiler in the Linux code.
The end goal for this is to profile the recovery code and generate
interesting statistics.
JIRA NVGPU-5606
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: I99783ec7e5143855845bde4e98760ff43350456d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355319
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make Recovery and quiesce co-exist to support quiesce state
on unrecoverrable errors. Currently, the quiesce code is wrapped
under ifndef CONFIG_NVGPU_RECOVERY. Isolate the quiesce code from
recovery config, thereby enabling it on all builds.
On Linux, the hung_task checker(check_hung_uninterruptible_tasks()
in kernel/hung_task.c) complains that quiesce thread is stuck for
more than 120 seconds.
INFO: task sw-quiesce:1068 blocked for more than 120 seconds.
The wait time of more than 120 seconds is expected as quiesce
thread will wait until quiesce call is triggered on fatal
unrecoverable errors. However, the INFO print upsets the
kernel_warning_test(KWT) on Linux builds. To fix the failing
KWT, change the quiesce task to interruptible instead of
uninterruptible as checker only looks at uninterruptible tasks.
Bug 2919899
JIRA NVGPU-5479
Change-Id: Ibd1023506859d8371998b785e881ace52cb5f030
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2342774
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update SW quiesce as follows:
- After waking up sw_quiesce_thread, nvgpu_sw_quiesce
masks interrupts, then disables and preempts runlists
without lock. There could be still a concurrent thread
that would re-enable the runlist by accident. This is
very unlikely and would mean we are not in mission mode
anyway.
- In sw_quiesce_thread, wait NVGPU_SW_QUIESCE_TIMEOUT_MS,
to leave some time for interrupt handler to set error
notifier (in case of HW error interrupt). Then disable
and preempt runlists, and set error notifier for remaining
channels before exiting the process.
Also modified nvgpu_can_busy to return false in case
SW quiesce is pending. This will make subsequent
devctl to fail.
Jira NVGPU-4512
Change-Id: I36dd554485f3b9b08f740f352f737ac4baa28746
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2266389
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, GPU fifo sw_ready flag is not reset after fifo clean_up
execution. This patch resets g->fifo.sw_ready flag in
nvgpu_fifo_cleanup_sw_common() to indicate fifo attributes are reset.
Also, pbdma setup and cleanup functions are optional and may not be
populated. This patch modifies nvgpu_fifo_cleanup_sw_common() to
executes nvgpu_pbdma_cleanup_sw() if pbdma.cleanup_sw is populated.
Jira NVGPU-4339
Change-Id: I6fd53577afdd0a15c75f15b54a916e70e850d1b0
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2237809
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For safety build, nvgpu driver should enter SW quiesce state
in case an uncorrectable error has occurred. In this state, any
activity on the GPU should be prevented, without powering off the GPU.
Also, a minimal set of operations should be used to enter SW quiesce
state.
Entering SW quiesce state does the following:
- set sw_quiesce_pending: when this flag is set, interrupt
handlers exit after masking interrupts. This should help mitigate
an interrupt storm.
- wake up thread to complete quiescing.
The thread performs the following:
- set NVGPU_DRIVER_IS_DYING to prevent allocation of new resources
- disable interrupts
- disable fifo scheduling
- preempt all runlists
- set error notifier for all active channels
Note: for channels with usermode submit enabled, userspace can
still ring doorbell, but this will not trigger any work on
engines since fifo scheduling is disabled.
Jira NVGPU-3493
Change-Id: I639a32da754d8833f54dcec1fa23135721d8d89a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2172391
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following violations are fixed in this patch
a) misra_c_2012_rule_2_1_violation: This code cannot be reached: "return
err;".
b) misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_preempt_channel(g, ch)" which returns error information without
testing the error information.
c) misra_c_2012_rule_8_6_violation: "" is declared but never defined for
following functions
1) gm20b_dump_engine_status
2) gp10b_ramfc_setup
3) gp10b_ramfc_get_syncpt
4) gp10b_ramfc_set_syncpt
5) gk20a_fifo_intr_0_enable
6) gk20a_fifo_intr_0_isr
7) gk20a_fifo_handle_sched_error
8) gk20a_fifo_is_mmu_fault_pending
9) gk20a_fifo_intr_set_recover_mask
10) gk20a_fifo_intr_unset_recover_mask
11) gk20a_init_fifo_reset_enable_hw
12) gk20a_init_fifo_setup_hw
13) nvgpu_tsg_set_runlist_interleave
14) gm20b_dump_engine_status
15) gp10b_pbdma_channel_fatal_0_intr_descs
16) gp10b_pbdma_allowed_syncpoints_0_index_f
17) gp10b_pbdma_allowed_syncpoints_0_valid_f
18) gp10b_pbdma_allowed_syncpoints_0_index_v
19) gk20a_runlist_reschedule
The above functions declarations are now embedded within
CONFIG_NVGPU_HAL_NON_FUSA
d) The function nvgpu_channel_abort_clean_up has a UMD version and hence
its taken out of CONFIG_NVGPU_KERNEL_MODE_SUBMIT to avoid errors of
type c above.
Jira NVGPU-3881
Change-Id: I5f85c7070e1d2f0b18d14db07ce22a01c29f0e40
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2181032
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to the path of kernel_mode submit and
the flag CONFIG_NVGPU_KERNEL_MODE_SUBMIT is used to compile these out
of safety builds.
channel_gk20a_alloc_priv_cmdbuf
channel_gk20a_free_prealloc_resources
channel_gk20a_joblist_add
channel_gk20a_joblist_delete
channel_gk20a_joblist_peek
channel_gk20a_prealloc_resources
nvgpu_channel
nvgpu_channel_add_job
nvgpu_channel_alloc_job
nvgpu_channel_alloc_priv_cmdbuf
nvgpu_channel_clean_up_jobs
nvgpu_channel_free_job
nvgpu_channel_free_priv_cmd_entry
nvgpu_channel_free_priv_cmd_q
nvgpu_channel_from_worker_item
nvgpu_channel_get_gpfifo_free_count
nvgpu_channel_is_prealloc_enabled
nvgpu_channel_joblist_is_empty
nvgpu_channel_joblist_lock
nvgpu_channel_joblist_unlock
nvgpu_channel_kernelmode_deinit
nvgpu_channel_poll_wdt
nvgpu_channel_set_syncpt
nvgpu_channel_setup_kernelmode
nvgpu_channel_sync_get_ref
nvgpu_channel_sync_incr
nvgpu_channel_sync_incr_user
nvgpu_channel_sync_put_ref_and_check
nvgpu_channel_sync_wait_fence_fd
nvgpu_channel_update
nvgpu_channel_update_gpfifo_get_and_get_free_count
nvgpu_channel_update_priv_cmd_q_and_free_entry
nvgpu_channel_wdt_continue
nvgpu_channel_wdt_handler
nvgpu_channel_wdt_init
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_rewind
nvgpu_channel_wdt_start
nvgpu_channel_wdt_stop
nvgpu_channel_worker_deinit
nvgpu_channel_worker_from_worker
nvgpu_channel_worker_init
nvgpu_channel_worker_poll_init
nvgpu_channel_worker_poll_wakeup_post_process_item
nvgpu_channel_worker_poll_wakeup_process_item
nvgpu_submit_channel_gpfifo_kernel
nvgpu_submit_channel_gpfifo_user
gk20a_userd_gp_get
gk20a_userd_pb_get
gk20a_userd_gp_put
nvgpu_fence_alloc
The following members of struct nvgpu_channel are compiled out of
safety build.
struct gpfifo_desc gpfifo;
struct priv_cmd_queue priv_cmd_q;
struct nvgpu_channel_sync *sync;
struct nvgpu_list_node worker_item;
struct nvgpu_channel_wdt wdt;
The following files are compiled out of safety build.
common/fifo/submit.c
common/sync/channe1_sync_semaphore.c
hal/fifo/userd_gv11b.c
Jira NVGPU-3479
Change-Id: If46c936477c6698f4bec3cab93906aaacb0ceabf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127212
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the nvgpu_init_mutex function return void.
In linux case, this doesn't affect anything since mutex_init
returns void.
For posix, we assert() and die if pthread_mutex_init fails.
This alleviates the need to error inject for _every_
nvgpu_mutex_init function in the driver.
Jira NVGPU-3476
Change-Id: Ibc801116dc82cdfcedcba2c352785f2640b7d54f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130538
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves gops init related to SDL from qnx to common-core. For this
purpose, it does the following changes:
- Adds stub functions for linux and posix.
- Updates nvgpu_init.c for mapping err_ops with report error APIs.
- Updates nvgpu_err.h header file to include prototypes related to error
reporting APIs.
- Updates nvgpu-linux.yaml file to include sdl_stub file.
Jira NVGPU-3237
Change-Id: Idbdbe6f8437bf53504b29dc2d50214484ad18d6f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119681
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create common/fifo/pbdma.c and move pbdma common code:
- nvgpu_pbdma_setup_sw
- nvgpu_pbdma_cleanup_sw
- nvgpu_pbdma_find_for_runlist
- nvgpu_pbdma_init_intr_descs
Moved the following HAL from fifo to pbdma
- fifo.find_pbdma_for_runlist -> pbdma.find_for_runlist
Added the following HALs
- fifo.init_pbdma_map
- pbdma.setup_sw
- pbdma.cleanup_sw
Jira NVGPU-2950
Change-Id: I17802ee61de669c3e17792b4505efb5e2bf530d3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Native and vgpu were using different paths for fifo
init/deinit code.
Use same nvgpu_fifo_init_support for init code:
nvgpu_fifo_init_support
g->ops.fifo.setup_sw
vgpu_fifo_setup_sw (NEW)
Use same nvgpu_fifo_remove_support for deinit code:
nvgpu_fifo_remove_support (NEW)
g->ops.fifo.cleanup_sw (NEW)
vgpu_fifo_cleanup_sw (NEW)
Also implemented gk20a_fifo_cleanup_sw for native case.
Jira NVGPU-1306
Jira NVGPU-2855
Change-Id: Iefe303cc224f804a206422e2efffda9da1616d89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029649
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
