-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt functions from
pmu_pstate.c to volt.c as it belongs there and also move the
arbitor specific functions under CLK_ARB as they will be removed
from safety build.
This patch does the following
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
*Replace pmu.h with nvgpu_mem.h in boardobj.h
*Rename obj_volt to nvgpu_pmu_volt
NVGPU-4491
NVGPU-4492
Change-Id: I9abc96f695fce41893311982a80dc3656aaa64d6
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2282361
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
-Created ucode_perf_pstate_inf.h and moved all
pstate interface structs and MACROs.
-Created nvgpu_perf_pstate_get_lpwr_index for getting
lpwr index
-Created nvgpu_clk_domain_get_from_index for getting
clk_domain from index
-Removed pstate_get_status code which is not needed
for tu10a profile
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I516816a1d92a60a91ea479cb9c334d332d3d7a89
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2264716
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Device info data format has changed from gp10b to
gv11b, and MMU fault id was incorrectly decoded for GR engine.
Add gv11b_device_info_parse_data HAL to decode device info
data with correct field definitions.
Move gp10b device_info parse data to non-fusa, since
it is not used anymore in safety build.
Jira NVGPU-4511
Change-Id: I2b3f3b5fec977d63a9ad6cfd99c04f375cf997e8
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2262217
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt unit from perf to pmu
as it belongs there and also move the arbitor specific functions under
CLK_ARB as they will be removed from safety build.
This patch does the following
*Move volt struct from perf to pmu
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
NVGPU-4491
NVGPU-4492
Change-Id: I7180cd12bbf91cc4d2e79b6e2d71c16e494c8ff0
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268215
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The devinit executes in parallel with PCIE link training
to reduce exit latency. Therefore, all PCIE settings that
normally occur during devinit after the PCIE link is up are
deferred until nvgpu has resumed control.
Bug 2661545
Change-Id: Ifdd4f645b2e1791d93567cc34d6ab0691a25d101
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210625
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently nvgpu queue APIs are in nvgpu_rmos folder
but they can be moved to Posix layer. This change adds
the queue APIs to posix layer and the same will get deleted
from the nvgpu_rmos folder.
JIRA NVGPU-2679
Change-Id: I1d33c9f8eeae5fcb8e628b755e788d0be6310e47
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2229355
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Renamed ACR structs for FUSA, ACR FUSA code has struct names
ending with _v1 & ACR non-FUSA with _v0, removed _v1 for FUSA
code to keep struct without any versioning for doxygen.
-Renamed acr_blob_construct_v1.c/h to acr_blob_construct.c/h
JIRA NVGPU-2516
Change-Id: Id2d5e48e8169ce59371c2b08d04c5a65ba94c685
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2218265
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 17.1 forbids use of stdarg.h features which are defined for
variable arguments.
This patch modifies logging macros to use slogf function for QNX builds.
This avoids use of variable argument functions used for formatting log
message.
Jira NVGPU-4075
Change-Id: I5b6bb1107a7e431afaa960003858193a477b2ee6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2192016
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GR tick frequency needs to be set to MAX value for profiler
use cases for gp10b/gv11b/tu104 chips.
Add new HAL g->ops.ptimer.config_gr_tick_freq() that configures GR
tick frequency to MAX value and call this HAL in GPU poweron path.
This support is not needed in safety build, so compile everything
only if CONFIG_NVGPU_DEBUGGER is enabled
Bug 200289214
Change-Id: Id8378540cc67ca0041b56990f8676e3a105403a5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195163
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_cg_pg_enable|disable functions are non-safe hence compile out
power_features.c. Corresponding functions from cg.c are also not
compiled. for e.g. nvgpu_cg_elcg_enable|disable, nvgpu_cg_blcg-
_mode_enable|disable, nvgpu_cg_slcg_gr_perf_ltc_load_enable|disable,
nvgpu_cg_elcg_set_elcg|blcg|slcg_enabled.
BLCG handling in nvgpu_cg_set_mode is non-safe hence compile it out
as well.
JIRA NVGPU-2175
Change-Id: I9940cc418d84eb30979dd50a2ed4a132473312fe
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168957
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds nvgpu API in linux and posix to query vpr resize.
The new API nvgpu_is_vpr_resize_enabled() is used in
nvgpu_submit_channel_gpfifo().
Previously, if non-deterministic channel has timeout disabled and
GPU cannot railgate on some platform, then channel doesn't power ref
count and results in video freeze. To resolve non-determinstic channel
job tracking needs to be enabled if vpr resize is supported or if GPU
can railgate.
Bug 200532122
Change-Id: Icfbff6253762b195b2f5955749343974b1a7a269
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2171093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
CE app functionality from nvgpu is non-safe for igpu. CE engines init
/reset/cg related functionality is required in safety. Hence move the
CE app logic under CONFIG_NVGPU_DGPU flag and update the sources
accordingly.
JIRA NVGPU-3814
Change-Id: I37aa00b1184baccd5fe569ec315be60ac42dac9b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168956
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In GV11B, read fuse_status_opt_tpc_gpc register
to read which TPCs are floorswept.
- The driver will also read sysfs node: tpc_pg_mask
- Based on these two values "can_tpc_powergate" will
be set to true or false and mask will be used to write to
fuse_ctrl_opt_tpc_gpc register to powergate the TPC.
- can_tpc_powergate = true indicates that the mask value
sent from userspace is valid and can be used to power gate
the desired TPC
- can_tpc_powergate = false indicates that the mask value
sent from userspace is not valid and cannot be used to
power gate the desired TPC.
Bug 200532639
Change-Id: Ib0806e4c96305a13b3574e8063ad8e16770aa7cd
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some recovery functions are currently exported in libnvgpu_safe.export.
Once CONFIG_NVGPU_RECOVERY is permanently disabled for safety build,
we can remove those functions from the export file.
Until we can disable it, make sure that related functions do exist,
even when CONFIG_NVGPU_RECOVERY is disabled, by using #ifdefs inside
the functions, instead of redeclaring functions as static inline.
Jira NVGPU-3871
Change-Id: Ib682ae81268b35cd1050a55cc73653fb6637b87c
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170433
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add CONFIG_NVGPU_RECOVERY in order to conditionally compile
recovery code. This code will be removed from safety build
when sw quiesce state is implemented, and negative tests are
disabled or modified such that they do not expect recovery
to happen.
Added static inline functions for recovery handlers, when
CONFIG_NVGPU_RECOVERY is not defined. These inline functions
can later be wired to the sw quiesce functions.
Also moved gv11b recovery code to non-fusa, as it will ultimately
be removed from safety build.
Jira NVGPU-3871
Change-Id: Ia705b059fab6120899c7e15082f2a0f51ff51dc9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166074
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There was a header file circular dependency that was preventing
including some files. For example, for utils.h to include safe_ops.h
would include bug.h which included log.h which included bitops.h which
included utils.h. To break this loop, the macro nvgpu_do_assert_print()
into a function in a new file assert.c. With this change, log.h is no
longer required in bug.h.
This change also required adding a few includes in C files that were
picking up definitions through the chain above.
JIRA NVGPU-3868
Change-Id: Icf95677bb36e4aa034cba25594cf71f2d028c289
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168528
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Initialize the clock counters for GPCCLK, XBARCLK, SYSCLK.
This INIT was done in PMU before, but now disabled from TU10A profile.
Hence the initialization is moved into nvgpu.
This patch does the following.
1. Move clock files from GV100 to TU104.
2. Add the Counter HW Registers.
3. Initialize the counter registers for gpc, xbar and sysclk.
4. Change the debug fs node from gv100 to tu104.
5. Update in yaml file with new file names.
Bug 200536091
Change-Id: I436019a18f5c4c73979977666d0c04ce4c569047
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155298
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following common and corresponding hal functions are non-safe. They are
either required for intr handling or for debug. Compile them out for
igpu safety release. Moved corresponding HALs to falcon_gk20a.c.
nvgpu_falcon_copy_from_emem
nvgpu_falcon_copy_to_emem
nvgpu_falcon_clear_halt_intr_status
nvgpu_falcon_set_irq
nvgpu_falcon_copy_from_dmem
nvgpu_falcon_copy_from_imem
nvgpu_falcon_print_dmem
nvgpu_falcon_print_imem
nvgpu_falcon_get_ctls
nvgpu_falcon_dump_stats can be used in the safety debug build.
JIRA NVGPU-898
JIRA NVGPU-2214
Change-Id: Icb7f904b088aa74b976f75a6a0ecdb783486bab3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2152978
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved gv11b_fb_intr_inject_hubmmu_ecc_error from fb_intr_ecc_gv11b.c to
fusa version and deleted that file. Moved debugger related functions
from fb_gm20b.c to fusa version. Updated arch yaml to reflect the fusa
and non-fusa fb units.
JIRA NVGPU-3690
Change-Id: I929169e9aac62e8377e4ea7e8353caa970999299
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2156879
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved gv11b_ltc_inject_ecc_error from ltc_gv11b to fusa version.
Moved debugger related functions from ltc_gm20b to fusa version.
Updated the arch yaml to reflect the non-fusa and fusa units
for ltc units.
JIRA NVGPU-3690
Change-Id: I48e360f18da760907e733023e013bd039ba5cca4
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2156878
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
