We have 3 header files for FECS tracing support
include/nvgpu/gr/fecs_trace.h : common header
include/nvgpu/ctxsw_trace.h : header that includes both common and
os-specific functions
os/linux/ctxsw_trace.h : linux specific header
Remove the second header since it is not needed.
Move all structures that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all function declarations that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all linux specific declarations in os/linux/ctxsw_trace.h and
rename this file as os/linux/fecs_trace_linux.h
Also rename os/linux/ctxsw_trace.c to os/linux/fecs_trace_linux.c
Jira NVGPU-1880
Change-Id: I05cc4489c4b6a64880b7d59c02b22cd2244d5e22
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070766
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gr_reset_mutex to engines_reset_mutex and acquire it
before initiating recovery. Recovery running in parallel with
engine reset is not recommended.
On hitting engine reset, h/w drops the ctxsw_status to INVALID in
fifo_engine_status register. Also while the engine is held in reset
h/w passes busy/idle straight through. fifo_engine_status registers
are correct in that there is no context switch outstanding
as the CTXSW is aborted when reset is asserted.
Use deferred_reset_mutex to protect deferred_reset_pending variable
If deferred_reset_pending is true then acquire engines_reset_mutex
and call gk20a_fifo_deferred_reset.
gk20a_fifo_deferred_reset would also check the value of
deferred_reset_pending before initiating reset process
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: I47de669a6203e0b2e9a8237ec4e4747339b9837c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2022373
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For handle_sched_error, change err to info print for failing eng
id returned as -1 i.e. FIFO_INVAL_ENGINE_ID as no engine is found
busy doing ctxsw. May be ctxsw already finished for the context
for which ctxsw timeout intr was triggered.
Possible Causes:
a)
On hitting engine reset, h/w drops the ctxsw_status to INVALID in
fifo_engine_status register. Also while the engine is held in reset
h/w passes busy/idle straight through. fifo_engine_status registers
are correct in that there is no context switch outstanding
as the CTXSW is aborted when reset is asserted.
This is just a side effect of how gv100 and earlier versions of
ctxsw_timeout behave.
With gv10b and later, h/w snaps the context at the point of error
so that s/w can see the tsg_id which caused the HW timeout.
b)
If engines are not busy and ctxsw state is valid then intr occurred
in the past and if the ctxsw state has moved on to VALID from LOAD
or SAVE, it means that whatever timed out eventually finished
anyways. The problem with this is that s/w cannot conclude which
context caused the problem as maybe more switches occurred before
intr is handled.
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: Ia79bee6e860fb179ee39024c963671d4f8245227
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030866
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The functions gk20a_dump_eng_status and gv11b_dump_eng_status belongs
to engine_status HAL unit.
1) The corresponding declaration and definitions of the above functions
are moved from fifo_{arch} files to engine_status_{arch} files.
2) The corresponding HAL pointer .dump_eng_status is moved from
fifo to engine_status HAL unit.
3) gv11b_dump_eng_status is now based to gv100b_dump_eng_status
4) Small changes in the files for ENGINE_STATUS such as correction of
HEADER DEFINES etc
Jira NVGPU-1315
Change-Id: I7fc06eab97206bc3b78c6f5c7aa30fa2c034961c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033632
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The corresponding HAL pointer for gk20a_fifo_wait_engine_idle is not
being invoked anywhere and hence they are removed from the code.
The function gk20a_fifo_wait_engine_idle belongs to engine unit and is
only called in a non-safe build, hence its moved to engine unit and is
restricted by a non-safe build flag NVGPU_ENGINE
Also, gk20a_fifo_wait_engine_idle is renamed to nvgpu_engine_wait_for_idle
Jira NVGPU-1315
Change-Id: Ie550c7e46a4284dfe368859d828b1994df34185f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to engine unit and are moved
gk20a_fifo_enable_engine_activity
gk20a_fifo_enable_all_engine_activity
gk20a_fifo_disable_engine_activity
gk20a_fifo_disable_all_engine_activity
These are renamed by replacing gk20a_fifo with nvgpu_engine as prefix.
These functions are only invoked by linux build and not required for
safety build and hence they are defined when
-DNVGPU_ENGINE is enabled.
Jira NVGPU-1315
Change-Id: I39d820879bb55b40e754526c657d794930a4b6a1
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
is_fault_engine_subid_gpc HAL pointer belongs to engine HAL unit instead of
fifo. This patch moves the HAL pointer to a newly constructed engine
HAL unit.
The following new files are added under HAL/fifo/
engines_gm20b.h
engines_gm20b.c
engines_gv11b.h
engines_gv11b.c
Jira NVGPU-1315
Change-Id: If28686bf7350563b06b13348a9fe3ef0099c35b2
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2031659
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new power/clock gating functions that can be called by
other units.
New clock_gating functions will reside in cg.c under
common/power_features/cg unit.
New power gating functions will reside in pg.c under
common/power_features/pg unit.
Use nvgpu_pg_elpg_disable and nvgpu_pg_elpg_enable to disable/enable
elpg and also in gr_gk20a_elpg_protected macro to access gr registers.
Add cg_pg_lock to make elpg_enabled, elcg_enabled, blcg_enabled
and slcg_enabled thread safe.
JIRA NVGPU-2014
Change-Id: I00d124c2ee16242c9a3ef82e7620fbb7f1297aff
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit f67bc51e51.
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Skip allocation and initialization of inactive runlists. Active
runlists info is stored in the active_runlist_info array.If a
runlist is active, then runlist_info[runlist_id] points to one
entry in active_runlist_info. Otherwise, runlist_info[runlist_id]
is NULL.
Operations that used to walk through all runlists are modified
to walk though active runlists only.
Bug 2470115
Bug 2522374
Change-Id: I98253ebebb4b1ba5957b57329820b94444b9d41b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030409
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit ade1d50cbe.
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Bug 2522374
Change-Id: I0deb6981bc6f5152bdf121f0a44429748aa14687
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030407
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are made in this patch.
1) nvgpu driver is incorrectly using u32 to store enum values in some
functions. Replaced them with correct type enum nvgpu_fifo_engine
2) change parameter type in nvgpu_engine_get_ids from engine_id[]
to *engine_ids
3) rename some function names to remove redundant characters to make
the name shorter.
4) Removed the initialization of enum nvgpu_fifo_engine in functions
where we assign a value before direct access.
Jira NVGPU-1315
Change-Id: Ic65b40c9cb1e90ad278cb36a00e1c9de51724f27
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2020230
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently PMU support enable check is done with multiple
methods which added complexity to know status of PMU
support.
Changed to replace multiple methods with support_pmu
flag to know the PMU support, support_pmu will be updated
at init stage based on platform/chip specific settings
to know the PMU support status.
Cleaned up support_pmu flag check with platform specific
PMU members in multiple places & moved check to
public functions
JIRA NVGPU-173
Change-Id: Ief2c64250d1f78e3b054203be56499e4d1d9b046
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2024024
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Skip allocation and initialization of inactive runlists.
Active runlists info is stored in the active_runlist_info array.
If a runlist is active, then runlist_info[runlist_id] points to
one entry in active_runlist_info. Otherwise, runlist_info[runlist_id]
is NULL.
Operations that used to walk through all runlists are modified to
walk though active runlists only.
Bug 2470115
Change-Id: Icd10281dc904bdee581ebc9cfeb662018ecca121
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025385
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Change-Id: I1615043cea84db35a270ade64695d51f85c1193a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The file semaphore.c is now split into 4 units namely
semaphore, semaphore_hw, semaphore_pool and semaphore_sea.
Each of the above units now have separate compilation units under
common/semaphore/. The public APIs corresponding to each unit is
present in include/nvgpu/semaphore.h. The dependency graph of the
below units is as follows where '->' indicates left depends on right.
semaphore -> semaphore_hw -> semaphore_pool -> semaphore_sea
Some of the other major changes made in this patch are as follows
i) Renamed some of the functions.
ii) Some functions are changed from private to public.
iii) Public header for semaphore contains only the declaration of the
corresponding structs as an opaque structure.
iv) Constructed a private header to contain internal functions common
to all the units and struct definitions corresponding to each unit.
v) Added new functions to provide access to internal members of the
units.
Jira NVGPU-2076
Change-Id: I6f111647ba9a9a9f8ef9c658f316cd5d6276c703
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2022782
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu driver uses the h/w headers for reading pbdma_status registers
directly in the common code path. Replace the use of the H/W headers by
using the APIs of the pbdma_status unit. Use the HAL ops functions
read_pbdma_status_info() to do a read of the pbdma status register.
Jira NVGPU-1311
Change-Id: I4b492e675ce2561bb1e132b518023f9933d8c510
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2019977
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are done in this patch.
1) gk20a_fifo_get_engine_info() is moved to common/fifo/engine.c
and is renamed to gk20a_fifo_get_active_engine_info() to reflect
accurately the purpose of the function.
2) move the definition of enum fifo_engine to <nvgpu/engines.h> and
add the prefix NVGPU_
3) move the following functions related to engines in fifo_gk20a.c to
common/fifo/engines.c and replace their signature by adding the prefix
nvgpu_engine and removing gk20a_fifo.
gk20a_fifo_get_active_engine_info
gk20a_fifo_engine_enum_from_type
gk20a_fifo_get_engine_ids
gk20a_fifo_is_valid_engine_id
gk20a_fifo_get_gr_engine_id
gk20a_fifo_act_eng_interrupt_mask
gk20a_fifo_engine_interrupt_mask
gk20a_fifo_get_all_ce_engine_reset_mask
Jira NVGPU-1315
Change-Id: I63d9dcd905a0bebcc9a4c65776cf6ec7a0837acf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011298
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Drop the "runlist_" part in the runlist section of the HAL ops. For
example:
- old: g->ops.runlist.runlist_wait_pending
- new: g->ops.runlist.wait_pending
At the same time, drop the "fifo_" part from the function names. For
example:
- old: gk20a_fifo_runlist_wait_pending
- new: gk20a_runlist_wait_pending
Also rename eng_runlist_base_size to count_max. The size of the
eng_runlist_base register array depicts the maximum possible number of
runlists in the chip for which count_max is more descriptive.
Jira NVGPU-1309
Change-Id: Ie9e94b9f65cd10d3e682d19954f240adb6e311be
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017403
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor read accesses to the ccsr_channel register for channel state to
be done via a channel HAL op for all chips. A new op called read_state
is added for this; information needed by other units is collected in a
new struct nvgpu_channel_hw_state.
Jira NVGPU-1307
Change-Id: Iff9385c08e17ac086d97f5771a54b56b2727e3c4
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017266
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extract out the HAL ops' implementation that now belongs to the channel
unit. This unit is responsible for channel register accesses and the
like (ccsr_*).
Rename channel_gm20b_bind to gm20b_fifo_channel_bind to match with the
rest of the naming. Same with channel_gv11b_unbind.
Jira NVGPU-1307
Change-Id: I58b9d96dbdaf36bdb163a5729544a41faec828ab
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017262
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out ops that belong to channel unit to a new section called
channel. Channel is a broad concept; this includes just the code that
accesses channel registers (ccsr_*). This is effectively just renaming;
the implementation still stays put.
The word "channel" is also dropped from certain HAL entries to avoid
redundancy (e.g., channel.disable_channel -> channel.disable).
fifo.get_num_fifos gets an entirely new name: channel.count.
Jira NVGPU-1307
Change-Id: I9a08103e461bf3ddb743aa37ababee3e0c73c861
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017261
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A comment for gk20a_fifo_update_runlist() says:
/* add/remove a channel from runlist
special cases below: runlist->active_channels will NOT be changed.
(ch == NULL && !add) means remove all active channels from runlist.
(ch == NULL && add) means restore all active channels on runlist. */
Those special cases call for a new function, so add that. Delete the
update_runlist HAL op and add update_for_channel (like update_runlist
without the special cases) and reload (no channel to add or remove, just
the special cases).
While at it, rename gk20a_fifo_update_runlist_ids to
nvgpu_runlist_reload_ids. It's common across chips and does what the
reload HAL does but for a list of several IDs.
Jira NVGPU-1922
Change-Id: I9a99ab03a636a1214c021faad359d2b304a9472f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2013058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When an engine faults due to unbound instance block, all
active TSGs are currently aborted. This includes the TSG
used by vidmem-clear task to clear vidmem buffers. From
this point nvgpu_vidmem_clear cannot submit jobs anymore.
Define TSG in MM CE context as non-abortable, and skip it
when aborting active TSGs.
Bug 2486146
Change-Id: I221259aec468e8ee3a24e80fab8d8fb7ee8607b0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2008954
(cherry picked from commit 6f2444dc5e128aa2b870796bd1e9dee7853f90af)
Reviewed-on: https://git-master.nvidia.com/r/2008942
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove handling for channels that are no more bound to tsg
as channel could be referenceable but no more part of a tsg
- Use tsg_gk20a_from_ch to get pointer to tsg for a given channel
- Clear unhandled gr interrupts
Bug 2429295
JIRA NVGPU-1580
Change-Id: I9da43a2bc9a0282c793b9f301eaf8e8604f91d70
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972492
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A naked channel ID does not carry good information about the channel
validity and is a very low level construct for an API of this level.
Refactor the runlist updating fifo APIs to take a channel pointer.
While at it, delete the channel and wait_for_finish parameters from
gk20a_fifo_update_runlist_ids() - the only caller is suspend and resume
and the parameters were always null for channel and true for wait.
Jira NVGPU-1309
Jira NVGPU-1737
Change-Id: Ied350bc8e482d8e311cc708ab0c7afdf315c61cc
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1997744
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
sema cmdbuf specific functions are only for the sync functionality
of nvgpu and do not belong to fifo.
construct files sema_cmdbuf_gk20a.h and sema_cmdbuf_gk20a.c
under common/sync to contain the syncpt specific cmdbuf functions
for arch gk20a.
Jira NVGPU-1308
Change-Id: Iebeebe7a3de627f2de08d4ced74bb1aabf1eb53c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975922
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
syncpt cmdbuf specific functions are only for the sync functionality of
nvgpu and donot belong to fifo.
construct files syncpt_cmdbuf_gk20a.h and syncpt_cmdbuf_gk20a.c under
common/sync to contain the syncpt specific cmdbuf functions for arch
gk20a.
The word 'fifo' is also removed from the name of these functions.
Jira NVGPU-1308
Change-Id: I1a1fd1d31f7decd1398f8e2ff625f95cf1f55033
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975920
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Two new fifo hals are added.
read_pbdma_data and reset_pbdma_header.
In turing the instruction that caused the interrupt
will be stored in NV_PPBDMA_PB_DATA0 register or
NV_PPBDMA_HDR_SHADOW register, which is decided based on
NV_PPBDMA_PB_COUNT value and PB_HEADER type
JIRA NVGPU-1240
Change-Id: I54a92e317a6054335439d2d61bced28aff3eecb7
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1990699
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 10.1 prohibits using signed values with bitwise operators.
Make fifo invalid ID macros compliant with this MISRA rule.
Also use these macros in source code instead of hardcoded numbers to
make the code more readable.
JIRA NVGPU-1006
Change-Id: I2f336d1decbc53b08f93587f2e00ea2cce47f72b
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1983700
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out native-specific engine info collection out of
nvgpu_init_runlist() so that it only contains common code. Call this
common function from vgpu code that ends up being identical.
Jira NVGPU-1309
Change-Id: I9e83669c84eb6b145fcadb4fa6e06413b34e1c03
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978060
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extract non-chip-specific code that manages the runlists (init, update,
reschedule etc.) to a new file in the common directory. Move the
declarations to a new matching runlist.h header.
Jira NVGPU-1309
Change-Id: I3c7e0032899516487037f47ddc9a7e7aa4b0b33a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the fifo code to use the HALs exposed by "Top" unit to
read data from device_info table.
The information for GRAPHICS engine in device_info table is
now parsed using the get_device_info HAL from "Top" unit.
Copy engine(CE) has multiple entries in the device_info table
corresponding to each instance of the engine. Prior to Pascal, each
instance of an engine was denoted by different engine type.
For example in GM20B, there are engine types like COPY_ENGINE0,
COPY_ENGINE1 and so on. In Pascal and chips beyond, a new field
called "inst_id" is added and the engine_type is kept the same for
different instances of an engine. For example in GP10B, all copy
engine entries have same engine type i.e ENGINE_LCE, but different
inst_ids. So for Pascal and chips beyond, we use a different HAL to
get CE information from device_info table.
JIRA NVGPU-1053
Change-Id: Ib40a616d903a5dbef5730678c2ebc3454b8e900d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969400
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
