Add new hal g->ops.gr.init.get_patch_slots() in hal.gr.init unit to get
patch slot count. Remove g->ops.gr.get_patch_slots().
Move corresponding functions to hal.gr.init unit
This hal does not need to be set for vGPU since it is not called in
that case
Jira NVGPU-2961
Change-Id: Ide488ae93af53a755da95faa268563070bd24bea
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2097533
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move os_channel close after tsg unbind which internally sets syncpoint
to a safe value. Otherwise it causes syncpoint wait in syncpt waiter
thread to block indefinitely if signaler is killed.
Bug 200509048
Change-Id: Ifcb3c2efcabd94c0a4f7da3975db316926003cb5
Signed-off-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094476
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Many of the functions in common.gr.obj_ctx and common.gr.fs_state units
directly dereference struct gr_gk20a to obtain other structures
e.g. API nvgpu_gr_obj_ctx_set_ctxsw_preemption_mode() obtains pointer
to nvgpu_gr_config struct by direct access g->gr.config
Such accesses add dependency of these units on gr.h and hence create
circular dependency with common.gr.gr unit
Fix this by receiving all required structures in the function parameter
list itself
Jira NVGPU-1886
Change-Id: Iee973ae33fc7e1707b8f025ad61683f725dedb53
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094995
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_gr_setup_free_subctx() in common.gr.ctx to free subctx
Call this via hal g->ops.gr.setup.free_subctx()
Subctx allocations happens through gr.setup api right now hence it makes
sense to provide subctx free api through same unit
Remove g->ops.channel.free_ctx_header() hal since we now have gr.setup
hal
Remove gv11b/subctx_gv11b.* files since they are no longer needed and
all the code in them has been moved to common units
Jira NVGPU-1886
Change-Id: I3d58fc3665ed9b6ffba830249a4cd30af7b857f4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094994
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move get_nonpes_aware_tpc hal to hal.gr.init . This hal is
implemented for gv11b.
Update sm_id_numbering hal to pass the gr_config struct pointer
as parameter to avoid dereferencing from gr inside hal.
JIRA NVGPU-2951
Change-Id: I1e06b634cc36741e116e41e581a18c7f5b373945
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093835
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created class unit under hal and moved all valid class check related
functionality to this unit. Moved all class defs from gr to a new header
include/nvgpu/class.h.
Moved following hals from gr to newly created class unit:
bool (*is_valid_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid)(u32 class_num);
bool (*is_valid_gfx_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_gfx)(u32 class_num);
bool (*is_valid_compute_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_compute)(u32 class_num);
JIRA NVGPU-3109
Change-Id: I01123e9b984613d4bddb2d8cf23d63410e212408
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095542
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
These two files contained the init_characteristics functions for
these two chips. move these to the hal_<chip>.c files for now.
This allows the gv11b.c and gp10b.c to be deleted and a bunch of
header includes removed.
The vGPU code required a slight update to the headers (moving the
<nvgpu/...> headers to before all the "common/..." and "hal/..."
includes since some of those headers make assumptions about what
is already present.
Also, delete the gv100/gv100.h header file and make the gv100
init_characteristics function static to be inline with the way the
gv11b and gp10b code now works. This further redecues the number
of sourece files and reduces needless complexity.
JIRA NVGPU-971
JIRA NVGPU-3074
Change-Id: Ic0ed722612ef9843e6219c7a00144ead12a73e78
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090978
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor the ECC code present under gp10b/, gv11b/, and tu104/. To
do this a few things were required:
Firstly, move the ecc related C and H files under the aforementioned
directories over to their new home under hal/gr/ecc/. Also copy over
the ECC HAL code present in gp10b/gp10b.c - not sure why this was
there but it, too, needed to be refactored. Also handle all the
updated header paths and Makefiles to take these movements into
account.
Secondly add a new HAL in GR (gr.ecc) to handle ECC HAL ops. There's
only two: detect and init. init() was copied over from gr and detect
was added so that the common ECC code can call it in a chip agnostic
way. This is required so that the ECC detect can be moved out of the
gp10b init characteristics function.
Lastly update the ECC init flow in the common ecc module to call
detect() right before init().
JIRA NVGPU-3074
Change-Id: Iba1464a904f9a91a45f30902beadf6f912607e40
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090977
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create common/fifo/pbdma.c and move pbdma common code:
- nvgpu_pbdma_setup_sw
- nvgpu_pbdma_cleanup_sw
- nvgpu_pbdma_find_for_runlist
- nvgpu_pbdma_init_intr_descs
Moved the following HAL from fifo to pbdma
- fifo.find_pbdma_for_runlist -> pbdma.find_for_runlist
Added the following HALs
- fifo.init_pbdma_map
- pbdma.setup_sw
- pbdma.cleanup_sw
Jira NVGPU-2950
Change-Id: I17802ee61de669c3e17792b4505efb5e2bf530d3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A dGPU can disappear from PCI bus for various reasons. This is
detected while accessing GPU registers and system is rebooted.
If dGPU has disappeared from the system, driver shutdown cannot
access dGPU registers. Skip any such de-initialization (nvlink)
done during shutdown.
Bug 200505461
Change-Id: Ief2e84212421093e57e63ff5958b209bd6857db9
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved
-mmu_fault_pending mm ops to is_mmu_fault_pending mc ops
-mmu_fault_pending fb ops to is_mmu_fault_pending fb.intr ops. This
is needed to check if mmu fault intr is pending for volta onwards.
Added
is_mmu_fault_pending fifo ops. This is needed to check if mmu fault
interrupt is pending for chips prior to volta
JIRA NVGPU-1313
Change-Id: Ie8e778387cd486cb19b18c4aee734c581dcd9229
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gk20a_gr_alloc_global_ctx_buffers from gr_gk20a.c to gr.c as
static function as gr_alloc_global_ctx_buffers. This function is
used locally by gr_init_setup_sw function.
Remove alloc_global_ctx_buffers hal function.
JIRA NVGPU-1885
Change-Id: I85f1ed85259cd564577b69af8cf01c1a2802004b
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093834
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed and moved from fifo to channel
gk20a_debug_dump_all_channel_status_ramfc -> nvgpu_channel_debug_dump_all
gk20a_dump_channel_status_ramfc -> gk20a_channel_debug_dump
gv11b_dump_channel_status_ramfc -> gv11b_channel_debug_dump
Moved nvgpu_channel_dump_info struct to channel.h
Moved nvgpu_channel_hw_state struct to channel.h
Moved dump_channel_status_ramfc fifo ops to channel ops
as debug_dump
JIRA NVGPU-2978
Change-Id: I696e5029d9e6ca4dc3516651b4d4f5230fe8b0b0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092709
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. In the case of the pmu_setup_elpg operation, all
implementations were always returning 0, so this patch changes the
signature to return void instead.
JIRA NVGPU-3036
Change-Id: I6f0a79314535ba9e3c65d28399b117b058bb23ca
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092680
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved init/deinit eng method buffers from fifo to tsg
- tsg.init_eng_method_buffers
- tsg.deinit_eng_method_buffers
Moved gv11b_fifo_init_ramfc_eng_method_buffer to the
following tsg HAL:
- tsg.bind_channel_eng_method_buffers
This HAL is now called during bind_channel.
Added the following ramin HAL:
- ramin.set_ramfc_eng_method_buffer
Jira NVGPU-2979
Change-Id: I96f6ff15d2176d4e3714fa8fe65a9126b3fff82c
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087185
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg:
- tsg.bind_channel
- tsg.unbind_channel
- tsg.unbind_channel_check_hw_state
- tsg.unbind_channel_check_ctx_reload
- tsg.unbind_channel_check_eng_faulted
bind_channel and unbind_channel HALs are optional,
and only implemented for vgpu:
- vgpu_tsg_bind_channel
- vgpu_tsg_unbind_channel
Moved the following code from fifo to tsg:
- nvgpu_tsg_bind_channel
- nvgpu_tsg_unbind_channel
- nvgpu_tsg_unbind_channel_check_hw_state
- nvgpu_tsg_unbind_channel_check_ctx_reload
- gv11b_tsg_unbind_channel_check_eng_faulted
tsg is now explictly passed to bind/unbind operations,
along with ch
Jira NVGPU-2979
Change-Id: I337a3d73ceef5ff320b036b14739ef0e831a28ee
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084029
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api nvgpu_gr_setup_set_preemption_mode() in common.gr.setup to
set various preemption modes
Define new hal g->ops.gr.setup.set_preemption_mode() that calls above
common api
Move corresponding code from gr_gp10b.c to common.gr.setup unit
Jira NVGPU-1886
Change-Id: I7cb0187a4809156e5f90f39727a782b17219afa3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092170
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below apis in common.gr.setup to allocate/free context
nvgpu_gr_setup_alloc_obj_ctx()
nvgpu_gr_setup_free_gr_ctx()
Define two new hals
g->ops.gr.setup.alloc_obj_ctx()
g->ops.gr.setup.free_gr_ctx()
Move corresponding code from gr_gk20a.c to common.gr.setup unit
Jira NVGPU-1886
Change-Id: Icf170a6ed8979afebcedaa98e3df1483437b427b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092169
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
SEC2 isr handling requires message processing in common msg unit. That
unit requires interfaces from hal to know if the msg interrupt was
received, set the msg interrupt and handle other interrupts.
JIRA NVGPU-2025
Change-Id: I3b5ad8968ea9298cc769113417931c4678009cf1
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085753
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
