-Add check for ECC parity errors in IMEM, DMEM, EMEM, DCLS, REG
for ACR running in GSP engine.
The EXTIRQ3 external interrupt is set from ACR pointing towards host.
-Add function to check error type when ACR or Bootrom execution fails
and report accordingly to SDL with relevant error codes.
This is a part of HSI safety requirements.
Bug 3564039
Jira NVGPU-8108
Change-Id: I65407371f7a1d1ba50a10bdf443ef6b903eeaa36
Signed-off-by: mpoojary <mpoojary@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2678100
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix GSP/PMU registers priv errors which are seen as part of boot sequence.
- Couple of GSP/PMU Falcon/NVRISCV registers are allowed to access
upon NVRISCV bootrom completion but these registers were needed
to configure on legacy chips to bootstrap/configure Falcon.
- Add is_falcon2_enabled or NVGPU_PMU_NEXT_CORE_ENABLED check
to skip these registers.
JIRA NVGPU-7025
Change-Id: I087a477ade6736398dea113f89894a0ff73ae647
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2553127
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add test scenarios for achieving branch coverage
for failure of dynamic memory allocation while
preparing ucode blob.
- Add more branch coverage for nvgpu_acr_bootstrap_hs_acr()
- Move GR reg space required for ACR tests to ACR unit test
itself to remove dependency on GR unit
JIRA NVGPU-4319
Change-Id: I770a696a1681eb05243c7168878793a30cd59c13
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286257
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR ucode is encrypted using different keys for prod/dbg boards.
This change adds a check to select ACR ucode based on board type.
Note: This support is added only for t19x.
This patch also enables the prints "DEBUG MODE" indicative of board/
acr_ucode signature type and sctl and cpuctl reg values.
Bug 2350733
Bug 2672832
Bug 2672836
JIRA NVGPU-4001
Change-Id: I936b811b5836152206b11ec615ee75d201939968
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2268880
Reviewed-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed HS self-load & bootstrap public function as no other unit access
this function. Made changes to ACR bootstrap function to load & bootstrap
ACR HS ucode on respective Engine Falcon using Falcon unit HS ucode load
& bootstrap function.
JIRA NVGPU-3811
Change-Id: I293f12137e568610a0b95f668a8408f9fce0a5f0
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195018
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moving HS ucode bootstrap from ACR unit to Falcon unit as HS ucode
bootstrap needs to be accessed by multiple units. Currently FB unit
calls ACR unit function to do self HS load & bootstrap memory unlock
HS ucode. This adds dependency on ACR unit which is not correct. So,
moving to Falcon unit to make it generic.
JIRA NVGPU-3811
Change-Id: I3696296c9df661d821199cb93872265ef6d10bfc
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195016
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR HS ucode is currently loaded by pmu_bl.bin (falcon bootloader),
but ACR ucode can be loaded without bootloader support by directly
copying non-secure/secure code to respective IMEM offset along with
required data to DMEM, with this bootloader dependency is removed.
This patch uses nvgpu_acr_self_hs_load_bootstrap to directly load
acr ucode to imem using priv writes. This also removes the bootloader
related code
JIRA NVGPU-3811
Change-Id: Ie2632eb26e421de3765a99c5426471eb37bf1bc9
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2169976
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Advisory Rule 2.7 states that there should be no unused
parameters in functions.
This patch removes unused function parameters from the following:
* acr_hs_bl_exec() -> remove 'acr' param
Jira NVGPU-3178
Change-Id: I46197964aa832bae24ea2fcbc8eeea1cac7f8909
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179495
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following common and corresponding hal functions are non-safe. They are
either required for intr handling or for debug. Compile them out for
igpu safety release. Moved corresponding HALs to falcon_gk20a.c.
nvgpu_falcon_copy_from_emem
nvgpu_falcon_copy_to_emem
nvgpu_falcon_clear_halt_intr_status
nvgpu_falcon_set_irq
nvgpu_falcon_copy_from_dmem
nvgpu_falcon_copy_from_imem
nvgpu_falcon_print_dmem
nvgpu_falcon_print_imem
nvgpu_falcon_get_ctls
nvgpu_falcon_dump_stats can be used in the safety debug build.
JIRA NVGPU-898
JIRA NVGPU-2214
Change-Id: Icb7f904b088aa74b976f75a6a0ecdb783486bab3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2152978
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rule 11.3 states that a cast shall not be performed
between a pointer and object type and a pointer to
a different object type.
Fix this violation by first casting the pointer to
void pointer (void *) and then casting that void
pointer to the required pointer type.
JIRA NVGPU-3571
Change-Id: I2dae55c5b1f4cda3beb3062844ecc853e45ac0a3
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2135035
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The HS ucode runs on PMU with all interrupts disabled. So it will not be
able to detect any data corruption introduced in the IMEM or DMEM due to bit
flips. In order to mitigate this issue validate the integrity of IMEM and DMEM
at the end of HS ucode bootstrap and fail the boot incase of any un-corrected
errors.
Jira NVGPU-3555
Change-Id: Icd9a2bf2c29470629be8524c9b99f90e3036abdc
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2124107
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR WPR/blob-alloc functions are called from different parts of
ACR UNIT like bootstrap, blob-construct & chip specific ACR sw
init functions, these functions are part of acr.c which adds
circular dependency between acr.c & other files, so, moved to
respective new fiels based on its operation & also cleaned up
header dependency.
JIRA NVGPU-2907
Change-Id: I78d1eab59757029017d6ca62cbfc227a7a8240e4
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081632
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently SEC2/GSP uses the PMU VM space for memory access which adds
dependency on PMU, So, created separate VM space for SEC2/GSP of
size 32MB as currently used for ucode handling by these units.
SEC2/GSP VM space allocation happens if NVGPU_SUPPORT_SEC2_VM/
NVGPU_SUPPORT_GSP_VM enable flags set.
JIRA NVGPU-2910
Change-Id: I4dfe50a1c0adb7e83379bf6c15343fe57ff44c38
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077596
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As part of ACR bootstrap, falcon bootstrap request is sent to engine HAL
functions along with bootloader structure & perform falcon boot, but
this adds constraint to HAL separation due to struct parameter, so
made ACR to handle falcon boot by using falcon interfaces along with
new HAL ops to setup engine falcon setup. This also helps to reduce
code duplication too.
JIRA NVGPU-2039
Change-Id: I6ca29390b74d75bad0467a3c17623a395ec9bc25
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072940
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently ACR header files are part of "include/nvgpu/acr/" folder &
ACR interfaces are not used by any other UNIT which allows headers to
keep restricted to ACR unit, as ACR can be divided into two stage
process like blob preparation & bootstrap, so moved header files from
of "include/nvgpu/acr/" to "nvgpu/common/acr/" to respective blob/
bootstrap/acr header files along with its dependent interfaces, this
allows interfaces restricted to header file based on operation it does.
With this any access to ACR must go through provided public functions,
this header move change caused large code modification & required to
make it with big single CL to avoid build break.
JIRA NVGPU-2907
Change-Id: Idb24b17a35f7c7a85efe923c4e26edfd42b028e3
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071393
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR HS ucode self-load & bootstrap functionality was part of FB
unit to support FB mem-unlock HS ucode & this needs to access
some ACR structs which will be part of ACR private headers &
adding constraints to implement ACR unit private header support.
JIRA NVGPU-2907
Change-Id: I6c6c7504ffe55426b377e9bcf911d4005813bb31
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069724
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currenlty struct hs_acr passed to engine falcon bootstrap function
to pass falcon info to the falcon unit to execute the ACR HS bin
using engine falcon, as engine already cached the falcon info as
part its structure so removed struct hs_acr parameter pass.
JIRA NVGPU-2907
Change-Id: I0b647b2763c52e97de0c17cfdd273486138ee404
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069593
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
