Move ACR WPR init region cmd from ISR to LSFM as part of LSF bootstrap
request to execute the ACR commands sequentially as well as a blocking
call by polling is_wpr_init_done status till set to true. Needed to
add dealy after each ACR command for ga10b LSPMU due to nvriscv priv
lockdown for ACR commands asynchronously from the nvgpu as detailed
below,
LSPMU engages priv lockdown whenever ACR commands needs to be
processed, and nvgpu polls for interrupt status by polling
pwr_falcon_irqstat_r registers once command is sent to PMU to
process the ACK message from LSPMU if priv lockdown is not
engaged. During NVRISCV priv lockdown couple of register are
not accessible including irqstat register, priv lockdown is
done by LSPMU upon ACR command receive and its asynchronous
to nvgpu which cause nvgpu irqstat read data to be 0xbadf*
during polling at corner cases even though priv lockdown
check is present and interpreting wrongly the irq stat
register.
Add delay of 5ms after ACR command sent to LSPMU(LSPMU takes
~3.5msec to complete the command process) and before polling
the irqstat register in nvgpu to engage priv lockdown in LSPMU.
This additional delay will help to skip reading the irqstat at
corner case during the priv lockdown process.
Bug 3464141
Bug 3482947
Change-Id: I494493a92f6ede5dcb876aeb0d76d54969f0f59e
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2673246
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
* As of now, working on multiple chip bringup in nvgpu-next repo has
an issue because we end with losing control on source code (hard to
find which part of the code belongs to which chip) and it's valuable
history this affects chip migration on release.
* To support multiple chip bringup simultaneously, we need new
guidelines to avoid losing control on source code and make migration
easier. This change adds links to nvgpu-next repo.
* Updated return code to ENODEV for consistency
* Updated ACR unittest to work with ENODEV return code
NOTE:
These are the initial set of infrastructure changes, guidelines
will evolve, and source code will get updated accordingly.
Based on future chip features, Which part of the source code falls
under nvgpu-next repo is decided.
JIRA NVGPU-6574
Change-Id: I81827e35d189c55554df00e255b527a4473e0338
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556793
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lazy bootstrap is a secure iGPU feature where LS falcons(FECS and
GPCCS) are bootstrapped by LSPMU in both cold boot and recovery boot.
As there is no ACR running after boot, we need LSPMU to bootstrap LS
falcons to support recovery.
In absence of LSPMU, ACR will bootstrap LS falcons but recovery is
not supported.
This CL will enable Low secure falcon manager(lsfm) to support
Lazy bootstrap feature. This will allow nvgpu to send cmds
to lspmu to bootstrap LS falcons.
Bug 200709761
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I65d17cf5e07a45c040a9bb75f75cf18eb509cd4f
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2506162
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Since dGPU support is not required for initial safety release, compile
out dGPU sw and hal implementations except below files that are used
by gv11b currently: acr_sw_gv100.c, engine_status_gv100.c, gr_gv100.c
gr_config_gv100.c and hwpm_map_gv100.c.
JIRA NVGPU-3062
Change-Id: I8a6bc8b235e7e5eac5b0e76147b8bd12f9abbd2d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119586
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
lsfm-LS falcon manager
Created lsfm unit under common/pmu/lsfm, moved functions &
variables related to lsfm functionality under lsfm unit,
within lsfm unit created separate files based on init which
does chip specific s/w init, separated private/public
functionality.
JIRA NVGPU-3021
Change-Id: Iad4a4e5533122fb2387a4980581a0d7bcdb37d67
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2080546
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
