For SMC mode, userspace is expected to use local indexing
for accessing GPC/FBP specific perf registers where local indexing
refers to indexes localized to a given SMC instance. H/W however expects
logical id based indexing for these registers. Currently, nvgpu driver maintains
a mapping between local <-> logical/physical ids of the GPCs for SMC specific
configurations/instances.
These register accesses are performed by the Debugger/Profiler interfaces and uses regops
for read/writes. In their current state, regops simply validates register addresses and performs
the required operation on them. These registers are currently indexed using local ids
and there is a need to convert them to use logical ids for supporting SMC modes. For non-SMC case
local ids are equivalent to logical ids and hence the conversion would have no effect on them.
Following changes are added to facilitate the above conversion from
local ids to logical ids in the regops path.
1) nvgpu_profiler_allowlist_range_search is modified to update
a nvgpu_pm_resource_register_range_map entry instead of just the
type.
2) added two APIs, one meant for profiler V2 based interfaces
and the other for legacy profiler interface. The logic for
legacy profiler interface extends into the more generic profiler
V2 logic to help retain future compatibility. These APIs are added
just after the validation stage for nvgpu_exec_regops.
3) The above APIs return an error if the local ids exceed the number
of GPCs/FBPs for a particular instance.
Bug 200712091
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I060c2408a798f2f4e058aba266fa1ea9cebc2682
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2644956
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
HAL .exec_regops used to first validate regops then execute it, now
moving it to only execute the regops.
- It helps B0CC on HV. On server side it does not track profiler object,
but regops validation uses the profiler, so moving validation to client
side.
- The change also remove ctx_buffer_offset checking in
validate_reg_op_offset. The offset already checked again whitelists
which have be verified when update whitelist. Also vgpu does not have
information of ctx and golden image.
- Added function nvgpu_regops_exec to cover both regops validation and
execution.
Jira GVSCI-10351
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: I434e027290e263a8a64a25a55500f7294038c9c4
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2534252
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
New profiler APIs set regop type based on whether context is bound or
not in nvgpu_prof_get_regops_staging_data(). But it is possible that
ctxsw is not enabled for some particular HWPM resource even if context
is bound to profiler object.
Fix this by extracting regop type based on per-resource ctxsw flag
instead of bound context.
Add reg_op_type[] array in profiler object to track regop type for each
HWPM resource. Initialize the array based on resource ctxsw flag in
nvgpu_profiler_pm_resource_reserve().
Update profiler_obj_validate_reg_op_offset() to get regop type from
nvgpu_profiler_validate_regops_allowlist() and use this type and
prof->reg_op_type[] to get actual type that should be used for that
regop.
Update validate_reg_ops() to validate the offset first since regop
type is now determined in offset validation. Set ops[i].status to 0
for each validation iteration, and if op is valid set it to
REGOP(STATUS_SUCCESS) at the end of iteration.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ib1f75d840d04d288789473adabda02cdc807eea0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460003
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Implement new API nvgpu_prof_ioctl_exec_reg_ops() to support regops on
new profiler objects.
Add two new staging buffers to hold regops copied from userspace, and
to convert and execute regops in common code.
Buffers are allocated and released along with the profiler object.
New API will implements this :
- copy regops data in chunks of 4K from userspace
- store them in staging buffer
- convert the new regop struct into common regop struct and also
copy the content into second staging buffer
- trigger gops.regops.exec_regops() with second staging buffer as
operation pointer
- convert common regop struct back into new regop struct and copy
back to userspace
Export bunch of helper functions from ioctl_dbg.h. e.g.
nvgpu_get_regops_op_values_common()
Update regop execution code to skip regop execution if regop status
is not valid. This is only possible when userspace requests for
CONTINUE_ON_ERROR mode.
Add more documentation to some of the fields in UAPI header.
Note that maximum atomic operations reported by new API are same
as legacy API and are incorrect. This will be fixed up in upcoming
patches.
Bug 2510974
Jira NVGPU-5360
Change-Id: I9f82052b22143aec33f6e778c0784386744b699e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2394208
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rework regops execution API to accomodate below updates for new
profiler design
- gops.regops.exec_regops() should accept TSG pointer instead of
channel pointer.
- Remove individual boolean parameters and add one flag field.
Below new flags are added to this API :
NVGPU_REG_OP_FLAG_MODE_ALL_OR_NONE
NVGPU_REG_OP_FLAG_MODE_CONTINUE_ON_ERROR
NVGPU_REG_OP_FLAG_ALL_PASSED
NVGPU_REG_OP_FLAG_DIRECT_OPS
Update other APIs, e.g. gr_gk20a_exec_ctx_ops() and validate_reg_ops()
as per new API changes.
Add new API gk20a_is_tsg_ctx_resident() to check context residency
from TSG pointer.
Convert gr_gk20a_ctx_patch_smpc() to a HAL gops.gr.ctx_patch_smpc().
Set this HAL only for gm20b since it is not required for later chips.
Also, remove subcontext code from this function since gm20b does not
support subcontext.
Remove stale comment about missing vGPU support in exec_regops_gk20a()
Bug 2510974
Jira NVGPU-5360
Change-Id: I3c25c34277b5ca88484da1e20d459118f15da102
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389733
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
quad type reg_ops were only needed on Kepler, and not for any other chip
beginning Maxweel.
HAL g->ops.gr.access_smpc_reg() was incorrectly set for Volta and Turing
whereas it was only applicable to Kepler. Delete it.
There is no register in the quad type whitelist since the type itself is
not supported anymore. Remove the empty whitelists for all chips and
also delete below HALs:
g->ops.regops.get_qctl_whitelist()
g->ops.regops.get_qctl_whitelist_count()
hal/regops/regops_gv100.* files are not used anymore. Delete the files
instead of just deleting quad HALs in these files.
Bug 200628391
Change-Id: I4dcc04bef5c24eb4d63d913f492a8c00543163a2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2366035
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct gr_gk20a defines boolean flag golden_image_initialized to
indicate if golden_image is initialized or not
common.gr.obj_ctx also added a flag of its own to check if golden_image
is ready
Add new API nvgpu_gr_obj_ctx_is_golden_image_ready() in
common.gr.obj_ctx unit to get status of golden_image
Use this new API everywhere to check if golden image is ready
Remove g->gr.ctx_vars.golden_image_initialized
Also remove ctx_mutex from struct gr_gk20a
Add new flag golden_image_initialized to struct nvgpu_pmu_pg and set it
when golden image is initialized. This is needed to avoid circular
dependency between GR and PMU
Jira NVGPU-3112
Change-Id: Id391294cede6424e15a9a9de29c40d013b509534
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The exec_regops() API was using a u64 for the num_ops parameter. The
lower level APIs used by exec_regops() expect u32s for this value.
Update the interface to use u32.
This eliminates MISRA Rule 10.3 violations for assignment of objects of
different essential or narrower types.
JIRA: NVGPU-3023
Change-Id: I5a2a22916f81d8b3d882d224d07eedffcde1e3ee
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084207
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move regops (gk20a/regops_gk20a.c) to separate unit common/regops/regops.c
Move corresponding header (gk20a/regops_gk20a.h) to include/nvgpu/regops.h
Move rest of the platform HAL files to common/regops/ as well
Fix all the header includes to include new public header
Remove *_apply_smpc_war() declarations from headers. Corresponding
functions were cleaned up already, and declarations were left somehow
Jira NVGPU-620
Change-Id: I8b8065b9c91f69809bdeb1b4caecdc7582c8a992
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1998723
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
