This change adds lsf_ucode_desc_wrapper to hold the pkc signature
header and corresponding lsf_lsb_header_v2. During blob preparation
based on the flag is_sig_pkc, the new header defines will be
packed into ls blob and passed to acr.
The flag NVGPU_PKC_LS_SIG_ENABLED is also added, which will be set
based on the acr core selection.
JIRA NVGPU-6365
Change-Id: I74e25d7c0f69d4007893e46006f97f2a607fd11f
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Signed-off-by: deepak goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2506136
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
At present, there is an inconsistency in the order in which
gpc_tpc masks are reported to the userspace. Both gpc and
tpc masks are reported using physical-ids. However, the
gpc_tpc_masks array is ordered by logical gpc-ids and
not physical-ids. This creates a mismatch between the gpc
reported as enabled in the gpc_mask and its corresponding
gpc_tpc_mask.
Introduce field "gpc_tpc_mask_physical" which stores the
gpc_tpc_masks in physical order and update
NVGPU_GPU_IOCTL_GET_TPC_MASKS to return this field.
Bug 200665942
Change-Id: I63aa83414a59676b7e7d36b6deb527e2f3c04cff
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2531114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix GSP/PMU registers priv errors which are seen as part of boot sequence.
- Couple of GSP/PMU Falcon/NVRISCV registers are allowed to access
upon NVRISCV bootrom completion but these registers were needed
to configure on legacy chips to bootstrap/configure Falcon.
- Add is_falcon2_enabled or NVGPU_PMU_NEXT_CORE_ENABLED check
to skip these registers.
JIRA NVGPU-7025
Change-Id: I087a477ade6736398dea113f89894a0ff73ae647
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2553127
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added below IVC commands to support VAB on HV.
* TEGRA_VGPU_CMD_FB_VAB_RESERVE - Enable & Configure VAB tracking
* TEGRA_VGPU_CMD_FB_VAB_FLUSH_STATE - Dump VAB to user buffer
* TEGRA_VGPU_CMD_FB_VAB_RELEASE - Disable VAB tracking
Also set HAL and enable VAB for ga10b vgpu.
Jira GVSCI-4619
Change-Id: Id7564611c24740ab8613e4baa420ee58fb52759a
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue observed:
- In GA10B, it was observed that after recovery happens
ELPG does not engage.
- It was because, after CE reset, when nvgpu_submit_twod test
was run to engage ELPG, IDLE_FLIPPED_PWR_OFF signal was asserted.
- This means that when ELPG was engaged (engine is in PWR_OFF),
some idle signal flips (becomes non-idle) and this causes
IDLE_SNAP. After IDLE_SNAP is hit, ELPG will not engage further.
- After debugging from WAVES, it was observed that:
LCE0/LCE1 are not done with the reset sequence.
- The state of these LCE is RESET0. A pri request (pri read
to NV_CE_PCE_MAP register in CE) is seen that kicks it out of
RESET0. After this state, it goes through few states to update
some internal states (states RESET1/RESET2/PCE_MAP etc) and then
eventually settles down to IDLE state.
Solution:
- Read ce_pce_map_r register in recovery sequence (after ce reset).
- It is observed that when this read is added recovery is complete
and post that when nvgpu_submit_two test is executed, ELPG is engaging.
- This means that a pri read is needed after CE reset so that it settles
to idle state properly and post that ELPG can engage properly.
Bug 200734258
Change-Id: I5bb84921ca62a740fde81ffe6c29ccde4ebb341b
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554493
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following modifications,
1) Added logic to skip the graphics unit specific sw context load
register write during context creation when MIG is enabled.
2) Added logic to skip the graphics unit specific sw method
register write when MIG is enabled.
3) Added logic to skip the graphics unit specific slcg and blcg gr
register write when MIG is enabled.
4) Fixed some priv errors observed during MIG boot.
5) Added MIG Physical support for GPU count < 1.
6) Host clk register access is not allowed for GA100.
So skipped to access host clk register.
7) Added utiliy api - nvgpu_gr_exec_with_ret_for_all_instances()
8) Added gr_pri_mme_shadow_ram_index_nvclass_v() reg field
to identify the sw method class number.
Bug 200649233
Change-Id: Ie434226f007ee5df75a506fedeeb10c3d6e227a3
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2549811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.ptimer unit right now exposes two APIs -
scale_ptimer() to scale the timer
ptimer_scalingfactor10x() to get the scaling factor
receiving scaling factor is not really necessary for user of
common.ptimer since it can be internally calculated in scale_ptimer()
function itself.
Hence make ptimer_scalingfactor10x() static and rename public API
scale_ptimer() to nvgpu_ptimer_scale()
nvgpu_ptimer_scale() will not accept timeout value as parameter
and return scaled timeout value in another pointer parameter.
Error code is returned if timeout value is invalid.
Jira NVGPU-6394
Change-Id: Ib882d99f6096c3af5f96eef298d713fb5e36dd87
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2546970
(cherry picked from commit 2da7c918efe91046818c83481664312e194ead8e)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add REMAP ioctl and accompanying support to the linux nvgpu driver.
REMAP support provides per-page control over sparse VM areas using the
concept of a virtual memory pool.
The REMAP ioctl accepts a list of operations (each a map or unmap) that
modify the VM area pages tracked by the virtual mmemory pool.
Inclusion of REMAP support in the nvgpu build is controlled by the new
CONFIG_NVGPU_REMAP flag. This flag is enabled by default for linux builds.
A new NVGPU_GPU_FLAGS_SUPPORT_REMAP characteristics flag is added for use
in detecting when REMAP support is available.
When a VM allocation tagged with NVGPU_VM_AREA_ALLOC_SPARSE is made the
base virtual memory pool resources are allocated. Per-page resources are
later allocated when the NVGPU_AS_IOCTL_REMAP ioctl is issued. All REMAP
resources are released when the corresponding VM area is freed.
Jira NVGPU-6804
Change-Id: I1f2cdc0c06c1698a62640c1c6fbcb2f9db24a0bc
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542178
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api to translate dmabuf's fmode_t to gk20a_mem_rw_flag
for read only/read write mapping selection.
By default dmabuf fd mapping permission should be a maximum
access permission associated to a particual dmabuf fd.
Remove bit flag MAP_ACCESS_NO_WRITE and add 2 bit values for
user access requests NVGPU_VM_MAP_ACCESS_DEFAULT|READ_ONLY|
READ_WRITE.
To unify map access type handling in Linux and QNX move the
parameter NVGPU_VM_MAP_ACCESS_* check to common function
nvgpu_vm_map.
Set MAP_ACCESS_TYPE enabled flag in common characteristics
init function as it is supported for Linux and QNX.
Bug 200717195
Bug 3250920
Change-Id: I1a249f7c52bda099390dd4f371b005e1a7cef62f
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507150
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Query the num_perfmon requires golden context to be ready. Accessing
golden context might require gr_instance_id, specific to a GR engine.
On TOT, get_num_hwpm_perfmon() called from perfmon HAL which might
require to call nvgpu_gr_exec_with_err_for_instance().
It internally calls nvgpu_grmgr_config_gr_remap_window() to change
gr_window_remap register points to a current gr_instance_id for MIG.
This approach indirectly mandates to call
nvgpu_gr_exec_with_err_for_instance() which can be
completely avoided. get_num_hwpm_perfmon() is just a query call
which can be moved after the golden context creation.
Using this logic, we can avoid unnecessary invocation of
nvgpu_gr_exec_with_err_for_instance() during perform specific
HAL accesses.
1) Moved get_num_hwpm_perfmon() after golden context creation.
2) Added nvgpu_assert() if (g->num_sys_perfmon == 0U).
JIRA NVGPU-5656
Change-Id: I59a6ab4df93763adbc0765fa5e4d1712b2477521
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542438
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
