Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
All graphics code is under CONFIG_NVGPU_GRAPHICS and all the HALs are
in non-fusa files. In order to support graphics in safety,
CONFIG_NVGPU_GRAPHICS needs to be enabled. But since most of the HALs
are in non-fusa files, this causes huge compilation problem.
Fix this by moving all graphics specific HALs used on gv11b to fusa
files. Graphics specific HALs not used on gv11b remain in non-fusa files
and need not be protected with GRAPHICS config.
Protect call to nvgpu_pmu_save_zbc() also with config
CONFIG_NVGPU_POWER_PG, since it is implemented under that config.
Delete hal/ltc/ltc_gv11b.c since sole function in this file is moved to
fusa file.
Enable nvgpu_writel_loop() in safety build since it is needed for now.
This will be revisited later once requirements are clearer.
Move below CTXSW methods under CONFIG_NVGPU_NON_FUSA for now. Safety
CTXSW ucode does not support these methods. These too will be revisited
later once requirements are clearer.
NVGPU_GR_FALCON_METHOD_PREEMPT_IMAGE_SIZE
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_ZCULL_IMAGE_SIZE
Jira NVGPU-6460
Change-Id: Ia095a04a9ba67126068aa7193f491ea27477f882
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2513675
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Disable access to ssync unit when MIG is enabled as ssync is
part of GR and not Compute. A runtime check is now added for the below
function.
gv11b_gr_intr_enable_hww_exceptions
The following priv errors are seen.
SYS write error: ADR 0x00405a14 WRDAT 0xc0000000 master 0x00000000
[ERR] INFO 0x19400200: (subid 0x00000019 priv_level 0 local_ordering 1)
[ERR] CODE 0xbadf1100
Jira NVGPU-6699
Change-Id: I9a08f1b6ab58affdcaa18e8ca314a4a00478a3e5
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2514761
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gv11b_gr_wait_for_sm_lock_down() uses nvgpu_get_poll_timeout() to
get timeout value for polling of SM lock down status.
nvgpu_get_poll_timeout() returns -1 if timeouts are disabled by
debugger, and if SM lock down fails, nvgpu lands in an infinite loop.
Use g->poll_timeout_default instead of nvgpu_get_poll_timeout() so
that explicit timeout value is always used. This also means that
timeout value of ULONG_MAX will still be used on simulation platforms.
Bug 200676073
Change-Id: I5777e98efcd63f24ade244384cf7b157dcea991d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2478255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mikhail Filimonov <mfilimonov@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the nvgpu_runlist_update_for_channel() function:
- Rename it to nvgpu_runlist_update()
- Have it take a pointer to the runlist to update instead
of a runlist ID. For the most part this makes the code
better but there's a few places where it's worse (for
now).
This starts the slow and painful process of moving away from
the non-runlist code using runlist IDs in many places it should
not.
Most of this patch is just fixing compilation problems with
the minor header updates.
JIRA NVGPU-6425
Change-Id: Id9885fe655d1d750625a1c8aceda9e67a2cbdb7a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470304
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add CAU initialization data in const array hwpm_cau_init_data[].
Add HAL API gops.gr.get_hwpm_cau_init_data() to retrieve this data
and implement it for TU104.
Add new HAL API gops.gr.init_cau() that uses above data and
initializes all cau units. Implement this HAL only for TU104.
Invoke above sequence from nvgpu_profiler_bind_hwpm() in case of
global HWPM mode.
Jira NVGPU-5360
Change-Id: I1c7a380e9d04d6cd45fb7f746c0a79fc56675244
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2463854
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Implement below functions:
- nvgpu_profiler_quiesce_hwpm_streamout_resident
Teardown sequence when context is resident or in case profiling
session is a device level session.
- nvgpu_profiler_quiesce_hwpm_streamout_non_resident
Teardown sequence when context is non resident
- nvgpu_profiler_quiesce_hwpm_streamout
Generic sequence to call either of above API based on whether
context is resident or not.
Trigger HWPM streamout teardown sequence while unbinding resources
in nvgpu_profiler_unbind_hwpm_streamout()
Add a new HAL gops.gr.is_tsg_ctx_resident to call
gk20a_is_tsg_ctx_resident() from common code.
Implement below supporting HALs for resident teardown sequence:
- gops.perf.pma_stream_enable()
- gops.perf.disable_all_perfmons()
- gops.perf.wait_for_idle_pmm_routers()
- gops.perf.wait_for_idle_pma()
- gops.gr.disable_cau()
- gops.gr.disable_smpc()
Jira NVGPU-5360
Change-Id: I304ea25d296fae0146937b15228ea21edc091e16
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2461333
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the below two regops ctxsw address types to fix misnomers:
- CTXSW_ADDR_TYPE_ROP:
This address type is used to access the PMM config registers and does not
belong to the ROP unit. Hence, rename it to CTXSW_ADDR_TYPE_PMM_FBPGS_ROP.
- CTXSW_ADDR_TYPE_BE:
This address type is used to access registers exclusively in ROP unit and not
the entire BE unit. Hence, its more appropriate to rename it to
CTXSW_ADDR_TYPE_ROP.
In addition, rename the following functions:
- pri_is_be_addr_shared => pri_is_rop_addr_shared
- pri_be_shared_addr => pri_rop_shared_addr
- pri_is_be_addr => pri_is_rop_addr
- pri_get_be_num => pri_get_rop_num
Bug 3146324
Change-Id: I8613f0972936699b2ef8f7dbe3de78582af2a35f
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2429885
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Pascal+ chips do not support updating PC sampling using register
NV_CTXSW_MAIN_IMAGE_PM (Unlike GM20B, bit 6 = PC_SAMPLING is not
present on GP10b, GV11b and TU104). To correct this in NVGPU, we
are setting the set_pc_sampling HAL to NULL.
We need to make sure devtools also does not call into
these APIs. Until the devtools team updates their code, we would
return success(0) from update_pc_sampling API even if the HAL is
set to NULL. Filed http://nvbugs/200671026 for devtools team.
Bug 200604892
Bug 200671026
Change-Id: I6334d4b2a84d7a0f676d7e2faad4befde5f76310
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2437002
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update nvgpu_gr_zbc as:
struct nvgpu_gr_zbc {
struct nvgpu_mutex zbc_lock; /* Lock to access zbc table */
struct zbc_color_table *zbc_col_tbl; /* SW zbc color table pointer */
struct zbc_depth_table *zbc_dep_tbl; /* SW zbc depth table pointer */
struct zbc_stencil_table *zbc_s_tbl; /* SW zbc stencil table pointer */
u32 min_color_index; /* Minimum valid color table index */
u32 min_depth_index; /* Minimum valid depth table index */
u32 min_stencil_index; /* Minimum valid stencil table index */
u32 max_color_index; /* Maximum valid color table index */
u32 max_depth_index; /* Maximum valid depth table index */
u32 max_stencil_index; /* Maximum valid stencil table index */
u32 max_used_color_index; /* Max used color table index */
u32 max_used_depth_index; /* Max used depth table index */
u32 max_used_stencil_index; /* Max used stencil table index */
};
Add global struct nvgpu_gr_zbc_table_indices
struct nvgpu_gr_zbc_table_indices {
u32 min_color_index;
u32 min_depth_index;
u32 min_stencil_index;
u32 max_color_index;
u32 max_depth_index;
u32 max_stencil_index;
};
Currently, hw zbc table registers are written during both
gr_init_setup_sw() and gr_init_setup_hw().
- Modify nvgpu_gr_zbc_load_default_table() to
nvgpu_gr_zbc_load_default_sw_table() to only update sw copy of zbc table
during gr_init_setup_sw().
- Modify nvgpu_gr_zbc_load_table() to write zbc values stored in sw zbc
table to hw registers.
Re-structure zbc function as per zbc type i.e. color, depth and stencil.
Add gr.zbc.init_table_indices() hal to initialize zbc indices. Valid ZBC
table indices start from 1. HW indices start from 0 for color, depth and
stencil tables. Note that the corresponding format registers follow ZBC
index range starting at 1.
- void (*init_table_indices)(struct gk20a *g,
struct nvgpu_gr_zbc_table_indices *zbc_indices);
- Add corresponding functions for legacy chips
- Add zbc color, depth and stencil table size hw defines
- Remove ltc.zbc_table_size() hal
- Update ltc.set_zbc_s_entry(), ltc.set_zbc_color_entry and
ltc.set_zbc_depth_entry() accordingly.
Bug 3122410
Bug 3122649
Change-Id: Ib799991ad35c6613534c0a6eb07f3bf24e600dc5
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417620
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below HALs are implemented in common.gr unit, but they really belong
to common.perf unit since they access registers from perf unit.
gops.gr.init_hwpm_pmm_register()
gops.gr.get_num_hwpm_perfmon()
gops.gr.set_pmm_register()
gops.gr.reset_hwpm_pmm_registers()
Move them to common.perf unit, and update all the code accordingly
gops.perf.init_hwpm_pmm_register()
gops.perf.get_num_hwpm_perfmon()
gops.perf.set_pmm_register()
gops.perf.reset_hwpm_pmm_registers()
Add new HAL gops.gr.get_pm_ctx_buffer_offsets() and set it to
gr_gk20a_get_pm_ctx_buffer_offsets() for all chips.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ib5e84ed5c8b6e72cc6923161e55fc2c3a6a4070e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2418306
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL g->ops.gr.reset_hwpm_pmm_registers() to reset all HWPM regs
while binding HWPM in global mode in nvgpu_profiler_bind_hwpm()
Add below new HALs to get sys/gpc/fbp register list and count
g->ops.perf.get_hwpm_sys_perfmon_regs()
g->ops.perf.get_hwpm_gpc_perfmon_regs()
g->ops.perf.get_hwpm_fbp_perfmon_regs()
Auto generate all the HWPM regs in below arrays for gv11b/tu104
static const u32 hwpm_sys_perfmon_regs[]
static const u32 hwpm_gpc_perfmon_regs[]
static const u32 hwpm_fbp_perfmon_regs[]
Bug 2510974
Jira NVGPU-5360
Change-Id: I2ca5c04ed75c7b30ae942807bf018a24551d7ba0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2414934
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gv100_init_hwpm_pmm_register() and gr_gv100_set_pmm_register() right
now assume common chiplet stride for all sys/fbp/gpc and use common API
g->ops.perf.get_pmm_per_chiplet_offset() to get the stride.
Chiplet strides are same for all partitions only by chance, and future
chip might change that.
Hence add and use below 3 separate HALs to get appropriate strides.
g->ops.perf.get_pmmsys_per_chiplet_offset()
g->ops.perf.get_pmmgpc_per_chiplet_offset()
g->ops.perf.get_pmmfbp_per_chiplet_offset()
Also store sys/fbp/gpc perfmon count in struct gk20a after first query
instead of querying them again and again. Querying the counts from HW
is time consuming.
Bug 2510974
Jira NVGPU-5360
Change-Id: I186009221009780d561617c0cd6f535854db585f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413108
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate flag gpu_dbg_gr to enable common.gr specific debugging.
Add this flag to all the existing debug logs that use gpu_dbg_fn or
gpu_dbg_info for debugging. Also add many other debugging logs that
might be helpful in debugging.
Removing debug log in gv11b_gr_init_get_nonpes_aware_tpc() as it dumps
too much data that does not seem useful.
Batch all interrupt enable functions in gr_init_setup_hw() together for
readability.
Jira NVGPU-5648
Change-Id: I0b857650122cdb1f974b452d28c26e7f142baf61
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2411740
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Get number of SMs from GR instance specific nvgpu_gr_config pointer
instead of global SM count in below functions :
nvgpu_gr_fs_state_init()
gv11b_gr_init_sm_id_config()
Update nvgpu_gr_config_get_gpc_skip_mask() to return 0 in case gpc_index
is greater than available gpc_count. This is not MIG specific, but based
on code review possible even today for existing chips.
See gm20b_gr_init_pd_skip_table_gpc()
Update nvgpu_gr_get_override_ecc_val() to return GR instance specific
value.
Execute gr_init_setup_hw() for each GR instance.
Disable below failing unit tests:
nvgpu_gr_fs_state.test_gr_fs_state_error_injection
nvgpu_gr_init.test_gr_init_hal_config_error_injection
Jira NVGPU-5648
Change-Id: Ie8f1c0c304c634756786d85facf336a5c9ae8195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410702
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Implement new API nvgpu_prof_ioctl_exec_reg_ops() to support regops on
new profiler objects.
Add two new staging buffers to hold regops copied from userspace, and
to convert and execute regops in common code.
Buffers are allocated and released along with the profiler object.
New API will implements this :
- copy regops data in chunks of 4K from userspace
- store them in staging buffer
- convert the new regop struct into common regop struct and also
copy the content into second staging buffer
- trigger gops.regops.exec_regops() with second staging buffer as
operation pointer
- convert common regop struct back into new regop struct and copy
back to userspace
Export bunch of helper functions from ioctl_dbg.h. e.g.
nvgpu_get_regops_op_values_common()
Update regop execution code to skip regop execution if regop status
is not valid. This is only possible when userspace requests for
CONTINUE_ON_ERROR mode.
Add more documentation to some of the fields in UAPI header.
Note that maximum atomic operations reported by new API are same
as legacy API and are incorrect. This will be fixed up in upcoming
patches.
Bug 2510974
Jira NVGPU-5360
Change-Id: I9f82052b22143aec33f6e778c0784386744b699e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2394208
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rework regops execution API to accomodate below updates for new
profiler design
- gops.regops.exec_regops() should accept TSG pointer instead of
channel pointer.
- Remove individual boolean parameters and add one flag field.
Below new flags are added to this API :
NVGPU_REG_OP_FLAG_MODE_ALL_OR_NONE
NVGPU_REG_OP_FLAG_MODE_CONTINUE_ON_ERROR
NVGPU_REG_OP_FLAG_ALL_PASSED
NVGPU_REG_OP_FLAG_DIRECT_OPS
Update other APIs, e.g. gr_gk20a_exec_ctx_ops() and validate_reg_ops()
as per new API changes.
Add new API gk20a_is_tsg_ctx_resident() to check context residency
from TSG pointer.
Convert gr_gk20a_ctx_patch_smpc() to a HAL gops.gr.ctx_patch_smpc().
Set this HAL only for gm20b since it is not required for later chips.
Also, remove subcontext code from this function since gm20b does not
support subcontext.
Remove stale comment about missing vGPU support in exec_regops_gk20a()
Bug 2510974
Jira NVGPU-5360
Change-Id: I3c25c34277b5ca88484da1e20d459118f15da102
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389733
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- NvRmGpuDeviceSetSmDebugMode uses regops interface.
- NvRmGpuDeviceTriggerSuspend, NvRmGpuDeviceWaitForPause,
and NvRmGpuDeviceResumeFromPause should return error on Pascal+. Use
regops interface to suspend/resume.
- On non-cilp devices(Maxwell), NvRmGpuDeviceTriggerSuspend,
NvRmGpuDeviceWaitForPause, NvRmGpuDeviceResumeFromPause and
NvRmGpuDeviceSetSmDebugMode are used when debugger(including coredump,
memcheck) is attached or when CUDA application uses a syscall that
requires traphandler(assert, cnp).
Bug 2558022
Bug 2559631
Bug 2706068
JIRA NVGPU-5502
Change-Id: I9eb2ab0c8c75c50f53523d8bf39c75f98b34f3f0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376159
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The driver configures the sm hww global, warp ESR report masks during poweron
as part of gops_gr.gr_init_support. However, during golden context init, these
are overwritten with default entries from sw_ctx_load list; this leaves the
report masks in a state inconsistent with the driver expectation.
The driver should configure the sm hww warp, global ESR report masks during
golden context init and not before it; Hence, move set_hww_esr_report_mask from
power-on path to golden context init.
In addition, update set_hww_esr_report_mask to do RMW, so as to retain the
values loaded from sw_ctx_load list.
Update global ESR report mask to enable all exceptions.
Bug 3029888
Bug 2997718
Change-Id: Id7ad4cff5409982143f49695c95c5e1d1c9fdec9
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367466
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
