Improved SDL heartbeat mechanism detects the interrupts triggered by
SW method and treats them as errors. Hence remove the SW method support
completely from safety build. Registers set by SW methods are now set
by default for all the contexts.
Implement new HAL gops.gr.init.set_default_compute_regs() to set the
registers in patch context. Call this HAL while creating each context.
Update gv11b_gr_intr_handle_sw_method() to treat all compute SW methods
as invalid.
Update unit test test_gr_intr_sw_exceptions() so that it now expects
failure for any method/data.
Bug 200748548
Change-Id: I614f6411bbe7000c22f1891bbaf06982e8bd7f0b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2527249
(cherry picked from commit bb6e0f9aa1404f79bcfbdd308b8c174a4fc83250)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602638
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The SEC2 ucode allocation code does not free the struct nvgpu_firmware
data structures used while requesting firmwares - sec2_fw, sec2_desc
and sec2_sig.
The lsfm_free_nonpmu_ucode_img_res() API only frees the 'data' field
of struct nvgpu_firmware, but not the entire struct.
Fix these memory leaks by calling nvgpu_release_firmware() API
after the intended use of allocated struct is achieved.
Bug 200690283
Change-Id: I1ed2e1603455bce65af897a40aa31ccc82fda4b0
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2488219
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_map_partial() to map a specific size of a buffer
represented by nvgpu_mem, or what nvgpu_gmmu_map() used to do. Delete
the size parameter from nvgpu_gmmu_map() such that it now maps the
entire buffer. The separate size parameter is a historical artifact from
when nvgpu_mem did not exist yet; the typical use is to map the entire
buffer.
Mapping at a certain address with nvgpu_gmmu_map_fixed() still takes the
size parameter.
The returned address still has to be stored somewhere, typically to
mem.gpu_va by the caller so that the matching unmap variant finds the
right address.
Change-Id: I7d67a0b15d741c6bcee1aecff1678e3216cc28d2
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601788
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_unmap_addr() to unmap a nvgpu_mem that was mapped
at some other address than mem.gpu_va, which can be the case for buffers
that are shared across different address spaces. Delete the address
parameter from nvgpu_gmmu_unmap(), as the common case is to store the
address to mem.gpu_va when mapping the buffer.
Modify some instances of consecutive unmap + free calls to call just
nvgpu_dma_unmap_free().
Change-Id: Iecd7c9aa41d04e9f48e055f6bc0c9227cd759c69
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601787
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Accessing any PGRAPH registers in GR intr retrigger
ISR routine when ELPG is engaged causes idle snap.
- This idle snap is caught when nvgpu_submit_illegal_class
test is run.
- To avoid access to PGRAPH registers when ELPG is engaged
add elpg protected call for GR intr retrigger and CE ISR
and retrigger HALs
Bug 200777033
Change-Id: Ieef4a423faf79f09476d696c3078b113750548bb
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2586449
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On pre-silicon platform, static pg will be
done by nvgpu driver. For this, retain structs
and HALs of static pg.
- Add the static pg support under pre-silicon code.
- On silicon, the static pg will be done by BPMP.
- Rename variables used in static pg for better
readability and consistency
Bug 200768322
JIRA NVGPU-6433
Change-Id: Ib31c0f83b751c2b1563a36bd51af78a0bd12a117
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2594801
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add Setter and Getter methods for accessing tsg->sm_error_states.
Getter returns a constant pointer for struct nvgpu_tsg_sm_error_state.
This renders it unnecessary to add BVEC for above fields for the struct
in multiple locations. The current design ensures that only a constant
pointer is obtained from the owner unit i.e. FIFO.
The following new methods are added. Both unit tests and BVEC tests
are added for them as well.
nvgpu_tsg_store_sm_error_state
nvgpu_tsg_get_sm_error_state
Jira NVGPU-6947
Change-Id: I82c22a2774862c8579baa41b6fb8292fa164704a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
(cherry picked from commit 79574638671a0c6efe41cd3423668fcd1bd96826)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556938
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Update documentation for priv_ring unit based on updated swud
guidelines. This patch is contains a combination of two commits.
Documentation is added for the HAL methods
enable_priv_ring and isr
decode_error_code
enum_ltc
get_fbp_count
get_gpc_count
set_ppriv_timeout_settings
Jira NVGPU-6986
Change-Id: Ifa401dab0f29330ab7db2dcc888edf46a402cc83
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2587227
GVS: Gerrit_Virtual_Submit
(cherry picked from commit 0bdcf425ca58e6d04dceaedbb48f3adef43a870a)
(cherry picked from commit ca44c09df60791db2ea6a6a80bc807f6c7eba494)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2590992
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch fixes a bug in the cbc initialization code for ga10b,
where it was erroneously assumed that a fixed ltc count of only one
should be used for historical reasons. For volta and later, the full
ltc count should be used in cbc-related computation.
Ensure
- CBC base address is 64K aligned
- CBC start address lies within CBC allocated memory
Check CBC is marked safe only for silicon platform.
Bug 3353418
Change-Id: I5edee2a78dc9e8c149e111a9f088a57e0154f5c2
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2585778
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
After CONFIG_UBSAN kernel compilation flag to know any shifting
cause overflow or not enablement ,this is identified.
The register "gr_fe_tpc_fs_r(gpc_index)" is read only after
Volta. The gops where we are computing the index is not needed.
Bug 200727116
Change-Id: Ib2306103389ba9df77fd59d012ec70e775104989
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573296
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When GPU need to programmed with PA(physical address),
given IPA need to be converted to PA by querying Hypervisor.
As this is an IPC between OSes, the call will reduce the
performance badly. So this is adding a IPA-PA cache to improve
the performance. This will be more helpful in passthr config.
Bug 3277194
Change-Id: I6a3230d858977313a0ed0f33068055a3b516330a
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2571814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable userspace query about comptags allocation status of a buffer,
comptags are to be allocated only during buffer registration done by
nvrm_gpu. Earlier, they were allocated during map.
nvrm_gpu will be sending metadata blob to be associated with the buffer.
This will have to be stored in the dmabuf privdata for all the buffers
registered by nvrm_gpu.
This patch moves the privdata allocation to buffer registration ioctl.
Remove g->mm.priv_lock as it is not needed now. This lock was added
to protect dmabuf private data setup. That private data is now
handled through dmabuf->ops and setup of dmabuf->ops is done
under dmabuf->lock.
To support legacy userspace, this patch still allocates comptags on
demand on map calls for unregistered buffers.
Bug 200586313
Change-Id: I88b2ca04c733dd02a84bcbf05060bddc00147790
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2480761
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently reading temperature value depeads on therm pstate
board objects. In absence of pstate reading temperature
from therm get status will be failed which will cause GVS
failure in NvRmGpuTest_Device_GetTemperature test.
This change will add support to read temperature from
therm sensor_00 register but this will have following
limitation:
- NV_THERM_I2CS_SENSOR_00 doesn't support fractional
precision.
- It doesn't support negative temperatures.
BUG-200736830
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I25e577dac9029fcd787a6f71957dbeefd6fe43dd
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2584269
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
There is HW specific limit on number of channel entries that can be
added for each TSG entry in runlist. Right now there is no checking
to enforce this from SW and hence if User binds more than supported
channels to same TSG, invalid TSG formation error interrupts are
generated.
Fix this by adding appropriate checks in below steps :
- Add new field ch_count to struct nvgpu_tsg to keep track of
channels bound to TSG.
- Define new hal gops.runlist.get_max_channels_per_tsg() to retrieve
HW specific maximum channel count per TSG.
- Implement the HAL for gk20a and gv11b chips, and assign new HALs for
all chips appropriately.
- Increment ch_count while binding the channel to TSG and decrement it
while unbinding.
- While binding channel to TSG, Check if current channel count is
already equal to max channel count. If yes, print an error and bail
out.
Bug 200763991
Change-Id: Ic5f17a52e0fb171d1c020bf4f085f57cdb95f923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2582095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, cbc init and compression tests are failing because MMU marks
cbc to be not safe.
- Modify cbc.get_base_divisor hal to use ltc_count = 1 for Tegra devices
- Update fb.cbc_configure to write compbit_backing_size value to
fb_mmu_cbc_top register.
- After config confirm that CBC is marked safe.
Bug 3353418
Change-Id: I1e9c27f47f7bfcf476f2499231951382e2e8653d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2570550
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
