The NEXT bit can remain set for the channel if timeslice expires before
scheduler clears it. Due to this nvgpu fails TSG unbind and in turn
nvrm_gpu fails channel close. In this case, checking the channel hw
state after some time can help see NEXT bit cleared by scheduler.
Reenable the tsg and return -EAGAIN to nvrm_gpu for it to retry again.
Bug 3144960
Change-Id: I35f417f02270e371a4e632986b73a00f8a4f921a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2468391
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add ptimer register offsets to regops allowlist for testing. New
allowlist restricts regops only to reserved resources, this makes it
difficult to test the interface since only HWPM registers can be
accessed and that could have side effects on system.
Having ptimer registers as test offsets has advantage that the offsets
do not change across chips, registers are read-only, and values are
always incrementing so a test can verify read regops and test various
flags of interface.
Add gops.ptimer.get_timer_reg_offsets() HAL to return timer offsets.
Add static function add_test_range_to_map() that adds timer offsets to
allowlist always.
In nvgpu_profiler_validate_regops_allowlist() return success if timer
offsets are hit in range search.
Bug 2510974
Jira NVGPU-5360
Change-Id: I8b51bb92e43e8b1bbe903c874a429341659ef603
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460002
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gr_gv100_reset_hwpm_pmm_registers() writes a bunch of registers in
sys/gpc/fbp chiplets to reset perfmons. To ensure all the writes have
completed it is necessary to readback each chiplet's PRI fence register.
Add and use new HAL g->ops.priv_ring.read_pri_fence() to achieve this.
Implement the HAL for gv11b in new source code file
hal/priv_ring/priv_ring_gv11b.c.
Bug 2510974
Jira NVGPU-5360
Change-Id: If4dd61cb4265422e8c2d16884790eb0fe7f2c103
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2453631
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL g->ops.gr.reset_hwpm_pmm_registers() to reset all HWPM regs
while binding HWPM in global mode in nvgpu_profiler_bind_hwpm()
Add below new HALs to get sys/gpc/fbp register list and count
g->ops.perf.get_hwpm_sys_perfmon_regs()
g->ops.perf.get_hwpm_gpc_perfmon_regs()
g->ops.perf.get_hwpm_fbp_perfmon_regs()
Auto generate all the HWPM regs in below arrays for gv11b/tu104
static const u32 hwpm_sys_perfmon_regs[]
static const u32 hwpm_gpc_perfmon_regs[]
static const u32 hwpm_fbp_perfmon_regs[]
Bug 2510974
Jira NVGPU-5360
Change-Id: I2ca5c04ed75c7b30ae942807bf018a24551d7ba0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2414934
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Continue making the incoherent channel functionality more structured by
moving the worker thread business to one file and the channel watchdog
logic to another. This is channel-internal restructuring; the interface
to other units does not change.
The watchdog logic is called from the worker thread and as such these
are rather tightly coupled but it's possible to have the thread and not
the watchdog.
Jira NVGPU-5582
Change-Id: I70f334dd15c9aca0eed75393b99e2f080d133015
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398921
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix syntax error in Makefile.sources
- Add missing test_enqueue entry to required_tests.ini
- Add nvgpu-next include path in Makefile.units.common.tmk. This will
provide an option to include nvgpu-next files in userspace build.
Bug 2920876
Change-Id: I5d34a89a66813aa39fb1dbdf19decfbb9c63c7eb
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2377295
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The lockless allocator that spins in alloc and free ops using cmpxchg to
mitigate race conditions has only ever been used for the post fences in
preallocated job resources. Now each post fence has a clear owner (the
job struct which already is allocated well) and lifetime, so this
allocator has no longer a purpose. Delete it to avoid bitrot. (The
design of the job queue has always been such that there's minimal
contention in any case.)
Jira NVGPU-5773
Change-Id: Ied98d977c2c75bacfd3d010ce60c80fe709231e0
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392705
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently the vGPU engine management rewrites a lot of the common
device agnostic engine management code.
With the new top HAL parsing one device at a time, it is now more
easily possible to tie the vGPU into the new common device framework
by implementing the top HAL but with the vGPU engine list backend.
This lets the vGPU inherit all the common engine and device
management code. By doing so the vGPU HAL need only implement a
trivial and simple HAL.
This also gets us a step closer to merging all of the CE init
code: logically it just iterates through all CE engines whatever
they may be. The only reason this differs between chips is because
of the swap from CE0-2 to LCEs in the Pascal generation. This could
be abstracted by the unit code easily enough.
Also, the pbdma_id for each engine has to be added to the device
struct. Eventually this was going to happen anyway, since the
device struct will soon replace the nvgpu_engine_info struct.
It's a little bit of an abuse but might be worth it long term. If
not, it should not be difficult to replace uses of dev->pbdma_id
with a proper lookup of PBDMA ID based on the device info.
JIRA NVGPU-5421
Change-Id: Ie8dcd3b0150184d58ca0f78940c2e7ca72994e64
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2351877
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add tu104 specific HAL tu104_gr_falcon_ctrl_ctxsw() that processes below
CTXSW methods to start/stop SMPC global mode :
NVGPU_GR_FALCON_METHOD_START_SMPC_GLOBAL_MODE
NVGPU_GR_FALCON_METHOD_STOP_SMPC_GLOBAL_MODE
Add new tu104 specific HAL tu104_gr_update_smpc_global_mode() to trigger
SMPC global mode start/stop using gops.gr.falcon.ctrl_ctxsw().
Update nvgpu_dbg_gpu_ioctl_smpc_ctxsw_mode() to enable/disable SMPC
global mode if channel is not bound to debug session.
Bug 2510974
Bug 2257799
Jira NVGPU-5360
Change-Id: I1f9d8f2a2d30a4738f291db3fc72c400d24f4048
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2368696
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current PM resource reservation system is limited to HWPM resources
only. And reservation tracking is done using boolean variables.
New upcoming profiler support requires reservation for all the PM
resources like SMPC and PMA stream. Using boolean variables is
not scalable and confusing. Plus the variables have to be replicated
on gpu server in case of virtualization.
Remove flag tracking mechanism and use list based approach to track
all PM reservations. Also, current HALs are defined on debugger object.
Implement new HALs in new pm_reservation object since it is really an
independent functionality.
Add new source file common/profiler/pm_reservation.c which implements
functions to reserve/release resources and to check if any resource
is reserved or not.
Add common/vgpu/pm_reservation_vgpu.c for vGPU which simply forwards
the request to gpu server.
Define new HAL object gops.pm_reservation and assign above functions
to below respective HALs :
g->ops.pm_reservation.acquire()
g->ops.pm_reservation.release()
g->ops.pm_reservation.release_all_per_vmid()
Last HAL above is only used for gpu server cleanup of guest OS.
Add below new common profiler functions that act as APIs to reserve/
release resources for rest of the units in nvgpu.
nvgpu_profiler_pm_resource_reserve()
nvgpu_profiler_pm_resource_release()
Initialize the meta data required for reservtion system in
nvgpu_pm_reservation_init() and call it during nvgpu_finalize_poweron.
Clean up the meta data before releasing struct gk20a.
Delete below HALs :
g->ops.debugger.check_and_set_global_reservation()
g->ops.debugger.check_and_set_context_reservation()
g->ops.debugger.release_profiler_reservation()
Bug 2510974
Jira NVGPU-5360
Change-Id: I4d9f89c58c791b3b2e63099a8a603462e5319222
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367224
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move profiler object allocation/free APIs to separate profiler
specific file common/profiler.c.
Store struct gk20a pointer in struct dbg_profiler_object_data for
convenience of accessing global struct pointer.
Update profiler object to store TSG pointer instead of channel
pointer. Since expectations is to have one profiler object
per context/TSG.
nvgpu_profiler_reserve_acquire() has a case to check if resource
reservation is acquired by some other channel in TSG.
But now since we keep track of TSG itself, this case becomes
redundant and can be removed.
All the support is compiled out of safety build with compile
flag CONFIG_NVGPU_PROFILER.
Linux will always compile the support.
Bug 2510974
Change-Id: I197bbd67a9cdd1fbea42f1effd1b74b15a6068e5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2365674
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
quad type reg_ops were only needed on Kepler, and not for any other chip
beginning Maxweel.
HAL g->ops.gr.access_smpc_reg() was incorrectly set for Volta and Turing
whereas it was only applicable to Kepler. Delete it.
There is no register in the quad type whitelist since the type itself is
not supported anymore. Remove the empty whitelists for all chips and
also delete below HALs:
g->ops.regops.get_qctl_whitelist()
g->ops.regops.get_qctl_whitelist_count()
hal/regops/regops_gv100.* files are not used anymore. Delete the files
instead of just deleting quad HALs in these files.
Bug 200628391
Change-Id: I4dcc04bef5c24eb4d63d913f492a8c00543163a2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2366035
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a generic profiler based on the channel kickoff profiler. This
aims to provide a mechanism to allow engineers to (more) easily profile
arbitrary software paths within nvgpu.
Usage of this profiler is still primarily through debugfs. Next up is
a generic debugfs interface for this profiler in the Linux code.
The end goal for this is to profile the recovery code and generate
interesting statistics.
JIRA NVGPU-5606
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: I99783ec7e5143855845bde4e98760ff43350456d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355319
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This adds a new device management unit in the common code responsible
for facilitating the parsing of the GPU top device list and providing
that info to other units in nvgpu.
The basic idea is to read this list once from HW and store it in a
set of lists corresponding to each device type (graphics, LCE, etc).
Many of the HALs in top can be deleted and instead implemented using
common code parsing the SW representation.
Every time the driver queries the device list it does so using a
device type and instance ID. This is common code. The HAL is responsible
for populating the device list in such a way that the driver can
query it in a chip agnostic manner.
Also delete some of the unit tests for functions that no longer
exist. This code will require new unit tests in time; those should be
quite simple to write once unit testing is needed.
JIRA NVGPU-5421
Change-Id: Ie41cd255404b90ae0376098a2d6e9f9abdd3f5ea
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319649
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, ltc fs_state is initialized during ltc init support. However,
ltc cbc_param and cbc_param2 registers do not seem to be providing
correct data if ltc.init_fs_state is called before fb.init_fs_state.
- Create fb.init_fb_support hal to initialize fb.
- Trigger init_fb_support before init_ltc_support.
Bug 2969956
Bug 2957808
JIRA NVGPU-4666
Change-Id: I54d697d27b9d9c6318c4ef459d215b6f82cd5571
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2345673
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The ecc init, handling for the fb unit is refactored to improve reusability
for nvgpu-next.
The following changes have been done:
- fb.ecc:
This is a new subunit within fb and contains the following functions:
- init: Moved from fb.fb_ecc_init.
- free: Moved from fb.fb_ecc_free.
- l2tlb_error_mask: Fetch bit mask for corrected, uncorrected errors supported
by the unit.
- fb.intr:
This unit has been updated to include the following ecc interrupt, error
handlers:
- handle_ecc: Top level interrupt handler for fb ecc errors.
- handle_ecc_l2tlb: Handle errors within l2tlb memory.
- handle_ecc_hubtlb: Handle errors within hubtlb memory.
- handle_ecc_fillunit: Handle errors within fillunit memory
Jira: NVGPU-5032
Change-Id: I1a26c1823eb992e0e0175250b969f1186dff6e62
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2333271
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Many tests used various incarnations of the mock register framework.
This was based on a dump of gv11b registers. Tests that greatly
benefitted from having generally sane register values all rely
heavily on this framework.
However, every test essentially did their own thing. This was not
efficient and has caused a some issues in cleaning up the device and
host code.
Therefore introduce a much leaner and simplified register framework.
All unit tests now automatically get a good subset of the gv11b
registers auto-populated. As part of this also populate the HAL with
a nvgpu_detect_chip() call. Many tests can now _probably_ have all
their HAL init (except dummy HAL stuff) deleted. But this does
require a few fixups here and there to set HALs to NULL where tests
expect HALs to be NULL by default.
Where necessary HALs are cleared with a memset to prevent unwanted
code from executing.
Overall, this imposes a far smaller burden on tests to initialize
their environments.
Something to consider for the future, though, is how to handle
supporting multiple chips in the unit test world.
JIRA NVGPU-5422
Change-Id: Icf1a63f728e9c5671ee0fdb726c235ffbd2843e2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable logging and error reporting for MIF, DLPL, and TLC blocks.
Configure the NVLIPT and IOCTRL interrupt registers to rollup
the MIF and TLC errors on the link-specific fatal line and the
DLPL interrupts on link-specific intr_a(fatal) line. Both
link_err_fatal and link_intr_a are rolled up to stall interrupt line.
In the handling ISR, clear the interrupt status registers and print
an error.
Move the interrupt handling HAL code to /common/hal.
JIRA NVGPU-4350
JIRA NVGPU-4351
JIRA NVGPU-5231
JIRA NVGPU-4354
JIRA NVGPU-4355
JIRA NVGPU-4356
Change-Id: I14812499caf506592f3ae84d6681d857730d31ff
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2313221
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor user managed syncpoints out of the channel sync infrastructure
that deals with jobs submitted via the kernel api. The user syncpt only
needs to expose the id and gpu address of the reserved syncpoint. None
of the rest (fences, priv cmdbufs) is needed for that, so it hasn't been
ideal to couple with the user-allocated syncpts.
With user syncpts now provided by channel_user_syncpt, remove the
user_managed flag from the kernel sync api.
This allows moving all the kernel submit sync code to be conditionally
compiled in only when needed, and separates the user sync functionality
in a more clear way from the rest with a minimal API.
[this is squashed with commit 5111caea601a (gpu: nvgpu: guard user
syncpt with nvhost config) from
https://git-master.nvidia.com/r/c/linux-nvgpu/+/2325009]
Jira NVGPU-4548
Change-Id: I99259fc9cbd30bbd478ed86acffcce12768502d3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2321768
(cherry picked from commit 1095ad353f5f1cf7ca180d0701bc02a607404f5e)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319629
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable build flags for dGPU in safety, when
NVGPU_FORCE_DGPU_SAFETY_PROFILE is set.
Use libnvgpu-dgpu_safe.exports for dGPU safety build.
Add build flags for tu104 HAL initialization (to solve
undefined symbols in safety build).
Temporarily add non-fusa files needed to build dGPU in safety.
related functions will have to move to fusa files.
Jira NVGPU-4611
Change-Id: I41db0c039c7f15d9191cdb811b4906e779d5cc88
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2310276
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added dependency between the Kconfig options as follows where
'->' indicates 'depends on' relation:
SUPPORT_CDE -> COMPRESSION -> DMABUF_HAS_DRVDATA
DGPU -> GK20A_PCI
Defined Kconfig option for VPR and for DGPU that is dependent GK20A_PCI
as well. DGPU related sources are now compiled under config flag DGPU.
Also update conditional compilation of the driver paths w.r.t DGPU,
VPR and COMPRESSION flags.
Bug 2834141
Change-Id: Ia0a39d6d4cf8b36e7f955b7355a5ab41783f821c
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2299627
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implmented functions to load and execute PUB which
is the safety POR.
PUB has following functionality:
1) Lower PLM
2) Reset PMU
3) FBPA register access to devtools
Secure Boot and Runtime (SBR) microcode comprises of
single PLM Update Binary (PUB) which will execute on
SEC2 Engine Falcon. NVGPU shall load and execute PUB
and wait for falcon halt. On successful halt NVGPU
shall proceed with ns ucode loading on respective
falcons.
NVGPU-4549
Change-Id: I8ea897a026bbe2b1714823aba51bfa51864dd68a
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292330
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, we are performing obj ctx alloction for bellow classes
1. VOLTA_COMPUTE_A
2. VOLTA_DMA_COPY_A
3. VOLTA_CHANNEL_GPFIFO_A
In safety, we use Async CE but not GRCE.
So allocating obj context only for COMPUTE_A and return success(0) for
all other valid classes, after setting class in the channel struct.
Jira NVGPU-4378
Change-Id: Ie99872e062cc66f9ddf699397a13df85c3d8d59e
Signed-off-by: sagar <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287486
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt functions from
pmu_pstate.c to volt.c as it belongs there and also move the
arbitor specific functions under CLK_ARB as they will be removed
from safety build.
This patch does the following
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
*Replace pmu.h with nvgpu_mem.h in boardobj.h
*Rename obj_volt to nvgpu_pmu_volt
NVGPU-4491
NVGPU-4492
Change-Id: I9abc96f695fce41893311982a80dc3656aaa64d6
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2282361
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
-Created ucode_perf_pstate_inf.h and moved all
pstate interface structs and MACROs.
-Created nvgpu_perf_pstate_get_lpwr_index for getting
lpwr index
-Created nvgpu_clk_domain_get_from_index for getting
clk_domain from index
-Removed pstate_get_status code which is not needed
for tu10a profile
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I516816a1d92a60a91ea479cb9c334d332d3d7a89
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2264716
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Device info data format has changed from gp10b to
gv11b, and MMU fault id was incorrectly decoded for GR engine.
Add gv11b_device_info_parse_data HAL to decode device info
data with correct field definitions.
Move gp10b device_info parse data to non-fusa, since
it is not used anymore in safety build.
Jira NVGPU-4511
Change-Id: I2b3f3b5fec977d63a9ad6cfd99c04f375cf997e8
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2262217
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt unit from perf to pmu
as it belongs there and also move the arbitor specific functions under
CLK_ARB as they will be removed from safety build.
This patch does the following
*Move volt struct from perf to pmu
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
NVGPU-4491
NVGPU-4492
Change-Id: I7180cd12bbf91cc4d2e79b6e2d71c16e494c8ff0
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268215
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
