This change is to adapt to shift of ACR t234 safety code from
iGPU to dGPU.
Required changes consists of:
Adding support for new LSB, WPR and ACR descriptor structures
which are more aligned with what dGPU currently uses.
Change old riscv LSB header to version 1, as version 2 will
be used for new header to align with dGPU header nomenclature.
Jira NVGPU-9298
Change-Id: Id75f7d0a03dc65c1983822ead428b330a83481a1
Signed-off-by: mpoojary <mpoojary@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2811116
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Renamed ACR structs for FUSA, ACR FUSA code has struct names
ending with _v1 & ACR non-FUSA with _v0, removed _v1 for FUSA
code to keep struct without any versioning for doxygen.
-Renamed acr_blob_construct_v1.c/h to acr_blob_construct.c/h
JIRA NVGPU-2516
Change-Id: Id2d5e48e8169ce59371c2b08d04c5a65ba94c685
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2218265
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR HS ucode is currently loaded by pmu_bl.bin (falcon bootloader),
but ACR ucode can be loaded without bootloader support by directly
copying non-secure/secure code to respective IMEM offset along with
required data to DMEM, with this bootloader dependency is removed.
This patch uses nvgpu_acr_self_hs_load_bootstrap to directly load
acr ucode to imem using priv writes. This also removes the bootloader
related code
JIRA NVGPU-3811
Change-Id: Ie2632eb26e421de3765a99c5426471eb37bf1bc9
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2169976
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The HS ucode runs on PMU with all interrupts disabled. So it will not be
able to detect any data corruption introduced in the IMEM or DMEM due to bit
flips. In order to mitigate this issue validate the integrity of IMEM and DMEM
at the end of HS ucode bootstrap and fail the boot incase of any un-corrected
errors.
Jira NVGPU-3555
Change-Id: Icd9a2bf2c29470629be8524c9b99f90e3036abdc
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2124107
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR WPR/blob-alloc functions are called from different parts of
ACR UNIT like bootstrap, blob-construct & chip specific ACR sw
init functions, these functions are part of acr.c which adds
circular dependency between acr.c & other files, so, moved to
respective new fiels based on its operation & also cleaned up
header dependency.
JIRA NVGPU-2907
Change-Id: I78d1eab59757029017d6ca62cbfc227a7a8240e4
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081632
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently ACR header files are part of "include/nvgpu/acr/" folder &
ACR interfaces are not used by any other UNIT which allows headers to
keep restricted to ACR unit, as ACR can be divided into two stage
process like blob preparation & bootstrap, so moved header files from
of "include/nvgpu/acr/" to "nvgpu/common/acr/" to respective blob/
bootstrap/acr header files along with its dependent interfaces, this
allows interfaces restricted to header file based on operation it does.
With this any access to ACR must go through provided public functions,
this header move change caused large code modification & required to
make it with big single CL to avoid build break.
JIRA NVGPU-2907
Change-Id: Idb24b17a35f7c7a85efe923c4e26edfd42b028e3
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071393
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
