On certain platforms, not all copy engine instances are usable. The user
shouldn't submit any work to these engines. To enforce this, remove
these engines from active/host_engine list, this should ensure that these
engines do not get advertised to userspace. In order to accomplish this
introduce the following functions:
- nvgpu_engine_remove_one_dev: This function removes the specified device
entry from following device lists: fifo->host_engines, fifo->active_engines,
runlist->rl_dev_list, runlist->eng_bitmask.
Replace iteration over LCE device type entries using
nvgpu_device_for_each(g, dev, NVGPU_DEVTYPE_LCE), along with this introduce
macro nvgpu_device_for_each_safe.
Introduce gpu_dbg_ce flag for CE debugging.
Bug 3370462
Change-Id: I2e21f18363c6e53630d129da241c8fece106cd33
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2616711
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
On production boards, there is requirement to disable GPU
profiler and debugger support. Add DT property 'support-gpu-tools'
which can be modified to enable/disable debugger/profiler support.
The default behavior is to enable the debugging features and set
'support-gpu-tools' to 1. This property is chosen to be u32 value
to be in sync with GPU vserser property by same name.
The debugger/profiler support is disabled by skipping the creation
of below nodes under /dev/nvgpu/:
1. ctxsw
2. dbg
3. prof
4. prof-dev
5. prof-ctx
Bug 200773450
JIRA NVGPU-7109
Change-Id: I86d72d17fa7f5492e117a4c1cd1144623e9b6132
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592012
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Introduce HAL function gops.mssnvlink.get_links, this function retrieves
the number of nvlinks supported by the chip along with their base
addresses.
Update ga10b_mssnvlink_init_soc_credits to call mssnvlink.get_links.
Jira NVGPU-6641
Change-Id: I4ff857925f126bf41dc83eebc5723403244f66b0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618368
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make ga10b_init_nvlink_soc_credits OS agnostic by replacing OS
specific functions with corresponding nvgpu wrappers. This function is now
assigned to gops.mssnvlink.init_soc_credits HAL.
Introduce nvgpu wrapper, nvgpu_io_map/unmap to map/unmap specified
physical address range.
Jira NVGPU-6641
Change-Id: I337bc75b8ec36552fe471bf5e42f62c19f67ed4a
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618237
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Start transitioning from an assumption of a single runlist buffer to the
domain based approach where a TSG is a participant of a scheduling
domain that then owns has a runlist buffer used for hardware scheduling.
Concretely, move the concept of a runlist domain up to the users of the
runlist code. Modifications to a runlist need to specify which domain is
modified.
There is still only the default domain that is created at boot.
Jira NVGPU-6425
Change-Id: Id9a29cff35c94e0d7e195db382d643e16025282d
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2621213
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move the active_channels and active_tsgs bitmaps from struct
nvgpu_runlist to struct nvgpu_runlist_domain. A TSG and its channels are
currently active as part of a runlist; in the future, a runlist may be
switched from multiple domains that each are a collection of TSGs.
The changes are still internal to the runlist code. Users of runlists
need no modifications.
Jira NVGPU-6425
Change-Id: I2d0e98e97f04b9716bc3f4890cf881735d0ab664
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618387
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The current runlist code assumes a single runlist buffer to hold all TSG
and channel entries. Create separate RL domain and domain memory types
to hold data that is related to only a scheduling domain and not
directly to the runlist hardware; in the future, more than one domains
may exist and one of them is enabled at a time.
The domain is used only internally by the runlist code at this point and
is functionally equivalent to the current runlist memory that houses the
round robin entries.
The double buffering is still kept, although more domains might benefit
from some cleverness. Although any number of created domains may be
edited in runtime, nly one runlist memory is accessed by the hardware at
a time. To spare some contiguous memory, this should be considered an
opportunity for optimization in the future.
Jira NVGPU-6425
Change-Id: Id99c55f058ad56daa48b732240f05b3195debfb1
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618386
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The implementation already exists. This change
adds NVGPU_GR_ZBC_TYPE_STENCIL and plumbs through
the stencil value from NvRmGpuDeviceZbcAddStencil
through NVGPU_GPU_IOCTL_ZBC_SET_TABLE.
Adds cases for querying the stencil values,
enabling NvRmGpuDeviceZbcGetStencilTableEntry.
Bug 3403523
Bug 3395601
Change-Id: I42c9a2967d0433e0bb08343aabeff0fe465f231e
Signed-off-by: Pyarelal Knowles <pknowles@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554963
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix PMM litter values for ROP and LTC units.
The ROP unit has been moved from FBP to GPC, hence, introduce new litter
constants:
- GPU_LIT_PERFMON_PMMGPC_ROP_DOMAIN_START
- GPU_LIT_PERFMON_PMMGPC_ROP_DOMAIN_COUNT
Previous PMMFBP_ROP litter constants are removed.
Update GPU_LIT_PERFMON_PMMFBP_LTC_DOMAIN_COUNT to 4.
Jira NVGPU-7204
Change-Id: If3b5e278099ac0d503a3535f1b9b328dc105488b
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2607544
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce debug logs printed when gpu_dbg_info or gpu_dbg_fn is set.
- Add gpu_dbg_verbose flag for more verbose debug prints. Update prints
in to ga10b_gr_init_wait_idle(), gm20b_gr_init_wait_fe_idle(),
gv11b_gr_init_write_bundle_veid_state() and
gv11b_gr_init_load_sw_veid_bundle().
- Add gpu_dbg_hwpm flag for hwpm specific debug prints. Update print in
nvgpu_gr_hwpm_map_create().
- Add gpu_dbg_mm for MM specific debug prints. Update prints in
gm20b_fb_tlb_invalidate(), gk20a_mm_fb_flush(),
gk20a_mm_l2_invalidate_locked(), gk20a_mm_l2_flush() and
gv11b_mm_l2_flush().
- Remove gpu_dbg_fn mask print in gr_ga10b_create_priv_addr_table(),
gr_gk20a_get_pm_ctx_buffer_offsets(), gr_gv11b_decode_priv_addr() and
gr_gv11b_create_priv_addr_table().
Jira NVGPU-7183
Change-Id: I9842d567047cb95a42e23b5907ae324214eed606
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602797
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Improved SDL heartbeat mechanism detects the interrupts triggered by
SW method and treats them as errors. Hence remove the SW method support
completely from safety build. Registers set by SW methods are now set
by default for all the contexts.
Implement new HAL gops.gr.init.set_default_compute_regs() to set the
registers in patch context. Call this HAL while creating each context.
Update gv11b_gr_intr_handle_sw_method() to treat all compute SW methods
as invalid.
Update unit test test_gr_intr_sw_exceptions() so that it now expects
failure for any method/data.
Bug 200748548
Change-Id: I614f6411bbe7000c22f1891bbaf06982e8bd7f0b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2527249
(cherry picked from commit bb6e0f9aa1404f79bcfbdd308b8c174a4fc83250)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602638
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The SEC2 ucode allocation code does not free the struct nvgpu_firmware
data structures used while requesting firmwares - sec2_fw, sec2_desc
and sec2_sig.
The lsfm_free_nonpmu_ucode_img_res() API only frees the 'data' field
of struct nvgpu_firmware, but not the entire struct.
Fix these memory leaks by calling nvgpu_release_firmware() API
after the intended use of allocated struct is achieved.
Bug 200690283
Change-Id: I1ed2e1603455bce65af897a40aa31ccc82fda4b0
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2488219
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_map_partial() to map a specific size of a buffer
represented by nvgpu_mem, or what nvgpu_gmmu_map() used to do. Delete
the size parameter from nvgpu_gmmu_map() such that it now maps the
entire buffer. The separate size parameter is a historical artifact from
when nvgpu_mem did not exist yet; the typical use is to map the entire
buffer.
Mapping at a certain address with nvgpu_gmmu_map_fixed() still takes the
size parameter.
The returned address still has to be stored somewhere, typically to
mem.gpu_va by the caller so that the matching unmap variant finds the
right address.
Change-Id: I7d67a0b15d741c6bcee1aecff1678e3216cc28d2
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601788
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_unmap_addr() to unmap a nvgpu_mem that was mapped
at some other address than mem.gpu_va, which can be the case for buffers
that are shared across different address spaces. Delete the address
parameter from nvgpu_gmmu_unmap(), as the common case is to store the
address to mem.gpu_va when mapping the buffer.
Modify some instances of consecutive unmap + free calls to call just
nvgpu_dma_unmap_free().
Change-Id: Iecd7c9aa41d04e9f48e055f6bc0c9227cd759c69
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601787
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Accessing any PGRAPH registers in GR intr retrigger
ISR routine when ELPG is engaged causes idle snap.
- This idle snap is caught when nvgpu_submit_illegal_class
test is run.
- To avoid access to PGRAPH registers when ELPG is engaged
add elpg protected call for GR intr retrigger and CE ISR
and retrigger HALs
Bug 200777033
Change-Id: Ieef4a423faf79f09476d696c3078b113750548bb
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2586449
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On pre-silicon platform, static pg will be
done by nvgpu driver. For this, retain structs
and HALs of static pg.
- Add the static pg support under pre-silicon code.
- On silicon, the static pg will be done by BPMP.
- Rename variables used in static pg for better
readability and consistency
Bug 200768322
JIRA NVGPU-6433
Change-Id: Ib31c0f83b751c2b1563a36bd51af78a0bd12a117
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2594801
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
