The devfreq drivers are available in kernel/nvidia and it
is required to integrate in kernel/nvidia-oot.
Remove Makefile so avoid makefile conflict.
Bug 4038415
Change-Id: If0e81b66271d65c5a6d613d61be0e95d1af503e1
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
The nvgpu is lying in separate repository and it is required
to build directly from that repository instead of copying source
to nvidia-oot tree and then build.
Remove the list of files/directories to copy to nvdia-oot source
path.
Bug 4038415
Change-Id: I236440d0e94335bb642b415ca8ef275acff69067
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2880467
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Guest VM has access to all of the profiler carveout right now so that
it can read full carveout and dump all the entries.
Right now address and size of Guest VM owned profiler carveout is parsed
from kernel command line. And the address of full profiler carveout
(containing logs of other VMs too) is calculated based on assumptions.
Current architecture is now getting reworked so that only a privileged
Guest VM can access full carveout and that too in read-only mode. Each
VM will have read-write access to its own carveout to read/write
profiler entries of that VM.
Update tegra_bootloader_debug_init.c to parse tegra_bl_prof_ro_start and
tegra_bl_prof_ro_size from kernel command line. These values indicate
address and size of the full read only carveout.
In tegra_bootloader_debuginit(), map the address of read only carveout
to tegra_bl_mapped_prof_ro_start and set is_privileged_vm to true.
Only privileged VM will be assigned this read only address by BL.
tegra_bl_mapped_prof_start continues to map to read-write carveout
owned by the VM.
Update profiler_show() so that it reads entries from the read-only
carveout if is_privileged_vm is set, otherwise it reads from read
write carveout.
Bug 3566403
Change-Id: I3c1e5d42d67f7724c6fa43b7e27f08ce2cd607b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2868921
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
T234 specific dt binding headers were added to support the
overlay DTBO from the nvidia-oot folder. However, all
overlay files are moved to the hardware/nvidia, these
dt-binding headers are no more required.
Bug 3916073
Change-Id: Iba69b9ff2465471fa46e013e8d87043a7ec3ae8d
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2878344
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
1. Update to VERSION "3.1.6fd4e69.20220818-105856"
2. Update the fw file for RTL8851A, RTL8852B
3. rtk_coex: Support vendor cmd for reporting the profile and state of each connection
4. rtk_bt/rtk_misc/rtk_coex/hci_ldisc/btrtksdio: fix the issues by coverity scan and Sparse build
5. rtk_bt: Add shutdown wakeup and fix failure of usb enumeration
6. rtk_bt: Add marco to distinguish powerkey or anykey wakeup
Bug 3528414
Change-Id: Ia44029f189f8fc2cd62160dbc763c6e91e8cd9b4
Signed-off-by: Sushil Singh <sushilkumars@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2876940
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Tested-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the ov5693 driver, which defines an I2C probe callback function,
to fix building the driver for Linux v6.3.
Bug 4014315
Change-Id: Ic037da06b1999801fb62e6ccd39b92fe86b5402a
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2875027
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The functions eth_hw_addr_set() and dev_addr_mod() do not exist for
Linux v5.14 and so compiling the marvell oak driver fails for Linux
v5.14. Fix this by calling memcpy() instead of eth_hw_addr_set() and
dev_addr_mod() for Linux v5.14. Note that both eth_hw_addr_set() and
dev_addr_mod() internally call memcpy() and so this is equivalent.
Bug 3820317
Change-Id: I4b49e031383adf62a55f1d01e8de2fcc0ad47862
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2875022
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The sensor kernel tests module is a simple test runner whose
responsibility is to dispatch tests and communicate with the
companion userspace binary over Generic Netlink sockets. Tests
may choose to register themselves with this module where they
then can be executed from userspace.
The sensor DT test asserts DT compliance of a given sensor node
with respect to a given TVCF version
A small set of logging utilities have been added to allow
tests the ability to log their results to the kernel log
or to some other handle (typically injected via the sensor
kernel tests module) through a common interface.
Bug 3583587
Change-Id: I22acf9c90fc82fbbdad8ba271dcdbbd6a5898eda
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2857293
Reviewed-by: Frank Chen <frankc@nvidia.com>
Reviewed-by: Semi Malinen <smalinen@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The legacy DTS is intentionally written to have macro in unit
address in the name of the node. This is creating the warning
for graph_port and graph_endpoint.
Ignore the warning for legacy DT build.
Bug 4037171
Change-Id: I57a869a2e69dcb7934fa6650edbd7d15b8e5f784
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2874128
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
List of changes squashed in this
* From previous commits
- Marvell: oak: Assign random MAC address
- Clear filters to support port mirroring
* New changes to be reviewed
- Terminate pci_device_id table
Jira ESDP-14058
Bug 200702607
Bug 3604084
Change-Id: Ice076a0c8d897292b098ac841f5636b5251db40d
Signed-off-by: Sheetal Tigadoli <stigadoli@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2856989
Reviewed-by: Sumeet Gupta <sumeetg@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the drivers which define an I2C probe callback function to fix
building them for Linux v6.3.
Bug 4014315
Change-Id: I1c9924e3b1b6413d385f7d0daa9ef181dadfabe4
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2870268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Commit 255e48eb1768 ("crypto: api - Use data directly in completion
function") updates the typedef crypto_completion_t such that a pointer
to the data is directly passed to the completion function instead of a
structure of type crypto_async_request. This breaks building the Tegra
NVVSE Cryptodev driver for Linux v6.3 and so update the driver
accordingly to fix the build.
Bug 4014315
Change-Id: I6e9ed50f5c226548efa5f52d094243f466ad399d
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2867127
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Upstream Linux commit ("3653480c6812 ASoC: soc-dai.h: cleanup
Playback/Capture data for snd_soc_dai") removes the capture_dma_data
and playback_dma_data variables from snd_soc_dai structure and this
breaks building the Tegra210 ADMAIF driver. Fix this by using the
appropriate API for Linux v6.3.
Bug 4014315
Change-Id: I76c8401571130a3d7ebaecacdfc299d59c1eaf8e
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2867123
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
