HAL gops.gr.config.init_sm_id_table() initializes SM count in struct
nvgpu_gr_config. It is almost impossible that SM count is detected as
zero.
Hence remove the error check and add an assert instead.
This also helps with code coverage tests since it is difficult to
simulate error condition of having zero SMs detected.
Also, HAL gops.gr.config.init_sm_id_table() should always be defined
for each platform. Hence remove unnecessary check.
Jira NVGPU-4373
Change-Id: Ibd9b301b28d5bd2952367346a8f12fabcee2abd9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247845
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_mc_log_pending_intrs is debugging related function hence compile
out that and related functionality under CONFIG_NVGPU_NON_FUSA.
nvgpu_mc_intr_enable is applicable for older chips hence compile out
under CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA.
Update BUS, CE, ECC, FIFO, MC, PRIV_RING, GR, LTC, FB, PMU units'
doxygen comments based on recent ECC and MC refactoring.
JIRA NVGPU-4439
Change-Id: I337318683d6311b9c2b5748f2fb07dff29a6584f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2252853
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MIRA Advisory Rule 4.4 states that sections of code
should not be commented out.
This change removes the following unused regop type from
our regops support:
/*#define NVGPU_DBG_REG_OP_TYPE_FB (0x00000020)*/
Jira NVGPU-3178
Change-Id: I2a65c50aabf6b51072dd6fc1e344d543e3359525
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2245762
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch constructs the initial setup for sync unit.
There are three simple tests currently. The first test inits the
environment necessary such as regspace init, hal init. The second
step simply fails the creation of the sync and the last test is meant
as a deinit step.
JIRA NVGPU-913
Change-Id: I1db72d9833c3c4bc3c3903a7d81cce06e9983509
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2248493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FECS ucode introduces separate register lists for control registers, so
that they can be restored separately from PM state.
Added support for:
- LIST_compressed_nv_perf_sys_control_ctx_regs
- LIST_compressed_nv_perf_pma_control_ctx_regs
- LIST_compressed_nv_perf_fbp_control_ctx_regs
- LIST_compressed_nv_perf_gpc_control_ctx_regs
Bug 200507276
Change-Id: Ifce398bcb298822f3a46cf372ef9610a46a8df0c
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2193528
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change approach to how the fault injection state is stored to facilitate
propagating fault injection state to child-threads. Rather than each
unit maintaining a thread-local object, there is a thread-local
container stored in the posix-fault-injection itself. This container is
initialized for each test module so that is independent of other other
test modules (for parallel test module execution). When child threads
are created with nvgpu_create_thread(), the fault injection container is
configured for the child.
JIRA NVGPU-3981
Change-Id: I9b580dc7f1621a7770eef8eba796f3918f2738bf
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2238474
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Typically, the PMU init thread will finish up long
before the golden context image has been initialized,
which means that ELPG hasn't truly been enabled at that
point.
Create a new function, nvgpu_pmu_reenable_pg(), which
checks if elpg had been enabled (non-zero refcnt), and
if so, disables then re-enables it.
Call this function from nvgpu_gr_obj_ctx_alloc() after
the golden context image has been initialized to ensure
that elpg is truly enabled.
Bug 200543218
Change-Id: I0e7c4f64434c5e356829581950edce61cc88882a
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2245768
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On safety build, MSSNVLINK HV is supporting dynamic update of
Protection table. Hence Guest OS Nvlink driver can't control
mssnvlink0 reset on safety build.
For this purpose, CONFIG_MSSNVLINK0_RST_CONTROL flag is defined and
enabled for the standard build, while it will be disabled for
the safety builds.
Bug 200545652
Change-Id: I4c03250475cc63e5f9ded1bf3ef3c462db46cd44
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242454
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove following error paths as they would never get called:
1. In gm20b_device_info_parse_enum:
- This is a private HAL and is only called by get_device_info HAL.
- It gets called only for table entry with entry type = enum.
- So we remove the check if(entry_type != enum)...
2. In gp10b_device_info_parse_data:
- This is a private HAL and is only called by get_device_info HAL.
- It gets called only for table entry with entry type = data.
- So we remove the check if(entry_type != data)...
3. In gp10b_get_device_info
- entry corresponds to 2 bit extracted from the table_entry.
- So, entry can have only 4 possible values.
- We would never reach the else case; hence remove it.
JIRA NVGPU-2204
Change-Id: I6243f4f9ffd78829f7057aad943ecc6980f82c86
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2243264
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The pmu init thread typically returns immediately
without calling nvgpu_thread_should_stop().
pmu_pg_kill_task() checks if the thread is running, and
if it is, calls nvgpu_thread_stop().
However, there's a race condition where the init thread could
have exited between the time that kill_task() checked the
running flag and the time we actually stop the thread, leading
to a kernel crash.
Fix this by making the running flag in the nvgpu_thread struct
atomic. Both the thread proxy function and the thread_stop()
function will set the flag to false.
In the case of nvgpu_thread_proxy(), if the flag is already false,
then nvgpu_thread_stop() has already reset it, at which point we
just wait for nvgpu_thread_should_stop() to return true.
In the case of nvgpu_thread_stop(), if the flag is already false,
then the thread proxy function has already exited, and there is
nothing more to do.
Bug 2591298
Change-Id: I9ba6b63c30a5c3e1df11e790094836b44373122b
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2230358
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Rule 5.9 states that identifiers that define
objects or functions with internal linkage should be unique.
While it is permissible for an inline function with internal
linkage to be defined in a single header file the same is not
true for data objects.
This change moves the aperture_name[] string table to within
the nvgpu_aperture_str() function to comply with this advisory
rule.
Because the size of the table is relatively small (< 40 bytes
for the strings) the storage class is changed to automatic.
Jira NVGPU-3178
Change-Id: I9efedc083511a8ecb0ca7e5fbf577030cddfd76b
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2241807
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
