fbpa related functions are not supported on igpu safety. Don't
compile them if CONFIG_NVGPU_DGPU is not set.
Also compile out fb and ramin hals that are dgpu specific.
Update the tests for the same.
JIRA NVGPU-4529
Change-Id: I1cd976c3bd17707c0d174a62cf753590512c3a37
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2265402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pwr_csb slcg, blcg gating registers are covered by pmu slcg/blcg hence
its load functions are not used. Hence, delete the generated data and
functions. slcg, blcg ctxsw_firmware and pg_gr gating reglists are
null hence delete the generated data and functions.
JIRA NVGPU-2175
Change-Id: Ib04d9845331c9a287666d3b8c974e1d3b66a7677
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2263272
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split GR ECC initialization into GPC/TPC and FECS ECC init as FECS ECC
errors during acr_construct_execute need to be reported and handled
hence FECS ECC counters are required to be initialized before
acr_construct_execute.
GPC/TPC ECC counters are dependent on the GR config that will be
initialized only after acr_construct_execute.
nvgpu_gr_intr_init_support is moved to nvgpu_gr_prepare_sw.
FECS ECC interrupt is enabled by default hence interrupt is not
enabled through gr_fecs_host_int_enable_r in nvgpu_gr_prepare_sw.
JIRA NVGPU-4439
Change-Id: Ifc9912f0578015a6ba1e9d38765c42633632b15f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2261987
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute
on different hardware resources.
This feature requires a change in software to make it possible
to modify the virtual SM id to TPC mapping across mission and
redundant contexts.
This CL adds only SM diversity flags which are exposed to
its clients through ioctl/devctl interfaces.
Actual virtual SM id to TPC mapping implementation
will be part of upcoming patch sets.
Added NvGpu CFLAGS to identify the safety build
"CONFIG_NVGPU_BUILD_CONFIGURATION_IS_SAFETY"
JIRA NVGPU-4133
Change-Id: I5a18256780e6726e399e39c1c8d155d2ef07d7bd
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2250461
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add doxygen support to following functions.
- gr_prepare_sw
- gr_enable_hw
- gr_init_support
- gr_suspend
In ecc subunit
- ecc_init_support
- ecc_remove_support
- detect
In setup subunit
- alloc_obj_ctx
- free_gr_ctx
- free_subctx
- set_preemption_mode
In falcon subunit
- read_fecs_ctxsw_mailbox
- dump_stats
- get_fecs_ctx_state_store_major_rev_id
- bind_instblk
- ctrl_ctxsw
In intr subunit
- nonstall_isr
- stall_isr
- flush_channel_tlb
In init subunit
- get_no_of_sm
- get_nonpes_aware_tpc
- wait_initialized
- fifo_access
- get_max_subctx_count
- detect_sm_arch
- get_supported__preemption_modes
- get_default_preemption_modes
Identified the hal ops not being called from outside
units. Placed those hals under @cond ... @endcond comments.
Each gr subunit structure definition is taken outside the
main gops_gr structure definition. This helps to give a
well structured doxygen document.
Removed unused gr.falcon hals for
submit_fecs_method_op
submit_fecs_sideband_method_op
Update doxygen comments for nvgpu_gr_enable_hw and
nvgpu_gr_intr_stall_isr functions.
Jira NVGPU-4107
Change-Id: I56a74ef07bcc21752a06e3a4f55442894bb9109f
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2214511
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add checking for unused non safety code in the
gr interrupt unit.
Add #ifdef CONFIG_NVGPU_HAL_NON_FUSA checking for
gm20b_gr_intr_tpc_exception_sm_enable function which is not being
called in safety code.
Add #ifdef CONFIG_NVGPU_DEBUGGER checking for
gm20b_gr_intr_tpc_exception_sm_disable function which is needed
with debugger enable.
Jira NVGPU-4085
Change-Id: Ie721505cdfced5b6b0443624d6e7cca2a0d4a19a
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2208918
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GR tick frequency needs to be set to MAX value for profiler
use cases for gp10b/gv11b/tu104 chips.
Add new HAL g->ops.ptimer.config_gr_tick_freq() that configures GR
tick frequency to MAX value and call this HAL in GPU poweron path.
This support is not needed in safety build, so compile everything
only if CONFIG_NVGPU_DEBUGGER is enabled
Bug 200289214
Change-Id: Id8378540cc67ca0041b56990f8676e3a105403a5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195163
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.init.get_access_map() returns whitelist of register addresses
that can be accessed by SET_FALCON methods when added into pushbuffer.
SET_FALCON method does not need to be supported in safety.
Hence install an empty register access map in safety build by adding
a new flag CONFIG_NVGPU_SET_FALCON_ACCESS_MAP.
Compile out g->ops.gr.init.get_access_map() and code that writes
whitelist in access map buffer.
Note that we still need to configure base address of access map in
context image even for safety.
Jira NVGPU-3995
Bug 2686235
Change-Id: I111b46f96821a09929aff32fcba5bb2215c81b9a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2185469
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change the directly called init functions to function pointers in the
HAL. This makes it more consistent. This also allows for writing more
comprehensive unit tests for nvgpu.common.init.
JIRA NVGPU-2239
Change-Id: I05d739a8f8a2e7d385322d93154206eb0bfddc10
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2173920
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In GV11B, read fuse_status_opt_tpc_gpc register
to read which TPCs are floorswept.
- The driver will also read sysfs node: tpc_pg_mask
- Based on these two values "can_tpc_powergate" will
be set to true or false and mask will be used to write to
fuse_ctrl_opt_tpc_gpc register to powergate the TPC.
- can_tpc_powergate = true indicates that the mask value
sent from userspace is valid and can be used to power gate
the desired TPC
- can_tpc_powergate = false indicates that the mask value
sent from userspace is not valid and cannot be used to
power gate the desired TPC.
Bug 200532639
Change-Id: Ib0806e4c96305a13b3574e8063ad8e16770aa7cd
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add CONFIG_NVGPU_RECOVERY in order to conditionally compile
recovery code. This code will be removed from safety build
when sw quiesce state is implemented, and negative tests are
disabled or modified such that they do not expect recovery
to happen.
Added static inline functions for recovery handlers, when
CONFIG_NVGPU_RECOVERY is not defined. These inline functions
can later be wired to the sw quiesce functions.
Also moved gv11b recovery code to non-fusa, as it will ultimately
be removed from safety build.
Jira NVGPU-3871
Change-Id: Ia705b059fab6120899c7e15082f2a0f51ff51dc9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166074
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved non-secure gr falcon boot related code to non-functional safety file.
Also added HAL initialization related to these functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag.
JIRA NVGPU-3741
Change-Id: I72fb92c04dc6e76c338e9a0e0cd86b12109ce284
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158936
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compile-out non-secure gr falcon boot related code for safety build by
adding non-secure gr falcon related code under following flag:
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT
Added nvgpu_gr_falcon_load_ctxsw_ucode and related functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag and enabled this flag only
for non-safety builds.
JIRA NVGPU-3741
Change-Id: I817d8a7be6a675eee514faf7bb93f1382c6da5ce
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158935
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following DEVCTLs not needed in safety build
Compiled out below DEVCTLs for safety build
* NVGPU_GPU_DEVCTL_SET_THERM_ALERT_LIMIT
* NVGPU_GPU_DEVCTL_GET_TPC_EXCEPTION_EN_STATUS
* NVGPU_GPU_DEVCTL_GET_CPU_TIME_CORRELATION_INFO
Also added config flag CONFIG_NVGPU_IOCTL_NON_FUSA
JIRA NVGPU-3768
Change-Id: Ia233d0aac8201268524581f588d97390a913ab9c
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159398
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There was a name clash between the nvgpu_set_error_notifier*() APIs and
the SET_ERROR_NOTIFIER IOCTL. Therefore, the APIs were renamed from
nvgpu_set_error_notifier*() to nvgpu_set_err_notifier*(). This rename
was done to fix MISRA 5.x errors.
JIRA NVGPU-1633
Change-Id: I06af551a664b0706f106e853f1ea8733894f11bd
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following common and corresponding hal functions are non-safe. They are
either required for intr handling or for debug. Compile them out for
igpu safety release. Moved corresponding HALs to falcon_gk20a.c.
nvgpu_falcon_copy_from_emem
nvgpu_falcon_copy_to_emem
nvgpu_falcon_clear_halt_intr_status
nvgpu_falcon_set_irq
nvgpu_falcon_copy_from_dmem
nvgpu_falcon_copy_from_imem
nvgpu_falcon_print_dmem
nvgpu_falcon_print_imem
nvgpu_falcon_get_ctls
nvgpu_falcon_dump_stats can be used in the safety debug build.
JIRA NVGPU-898
JIRA NVGPU-2214
Change-Id: Icb7f904b088aa74b976f75a6a0ecdb783486bab3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2152978
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following are removed for safety build by adding
CONFIG_NVGPU_KERNEL_MODE_SUBMIT flag.
1) HAL ops in g->ops.sync.syncpt
add_wait_cmd
get_wait_cmd_size
add_incr_cmd
get_incr_cmd_size
get_incr_per_release
2) g->ops.sync.sema is removed in its entirety and contains the
following ops.
3) The following files are compiled out using the above flag.
hal/sync/sema_cmdbuf_gk20a.c
hal/sync/sema_cmdbuf_gv11b.c
Jira NVGPU-3479
Change-Id: I99ae6913e5fe5707ff9a3e2cf06cee8710def7cc
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to the path of kernel_mode submit and
the flag CONFIG_NVGPU_KERNEL_MODE_SUBMIT is used to compile these out
of safety builds.
channel_gk20a_alloc_priv_cmdbuf
channel_gk20a_free_prealloc_resources
channel_gk20a_joblist_add
channel_gk20a_joblist_delete
channel_gk20a_joblist_peek
channel_gk20a_prealloc_resources
nvgpu_channel
nvgpu_channel_add_job
nvgpu_channel_alloc_job
nvgpu_channel_alloc_priv_cmdbuf
nvgpu_channel_clean_up_jobs
nvgpu_channel_free_job
nvgpu_channel_free_priv_cmd_entry
nvgpu_channel_free_priv_cmd_q
nvgpu_channel_from_worker_item
nvgpu_channel_get_gpfifo_free_count
nvgpu_channel_is_prealloc_enabled
nvgpu_channel_joblist_is_empty
nvgpu_channel_joblist_lock
nvgpu_channel_joblist_unlock
nvgpu_channel_kernelmode_deinit
nvgpu_channel_poll_wdt
nvgpu_channel_set_syncpt
nvgpu_channel_setup_kernelmode
nvgpu_channel_sync_get_ref
nvgpu_channel_sync_incr
nvgpu_channel_sync_incr_user
nvgpu_channel_sync_put_ref_and_check
nvgpu_channel_sync_wait_fence_fd
nvgpu_channel_update
nvgpu_channel_update_gpfifo_get_and_get_free_count
nvgpu_channel_update_priv_cmd_q_and_free_entry
nvgpu_channel_wdt_continue
nvgpu_channel_wdt_handler
nvgpu_channel_wdt_init
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_rewind
nvgpu_channel_wdt_start
nvgpu_channel_wdt_stop
nvgpu_channel_worker_deinit
nvgpu_channel_worker_from_worker
nvgpu_channel_worker_init
nvgpu_channel_worker_poll_init
nvgpu_channel_worker_poll_wakeup_post_process_item
nvgpu_channel_worker_poll_wakeup_process_item
nvgpu_submit_channel_gpfifo_kernel
nvgpu_submit_channel_gpfifo_user
gk20a_userd_gp_get
gk20a_userd_pb_get
gk20a_userd_gp_put
nvgpu_fence_alloc
The following members of struct nvgpu_channel are compiled out of
safety build.
struct gpfifo_desc gpfifo;
struct priv_cmd_queue priv_cmd_q;
struct nvgpu_channel_sync *sync;
struct nvgpu_list_node worker_item;
struct nvgpu_channel_wdt wdt;
The following files are compiled out of safety build.
common/fifo/submit.c
common/sync/channe1_sync_semaphore.c
hal/fifo/userd_gv11b.c
Jira NVGPU-3479
Change-Id: If46c936477c6698f4bec3cab93906aaacb0ceabf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127212
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below hals since the corresponding functions are same on all
platforms and they are h/w independent
g->ops.gr.enable_ctxsw()
g->ops.gr.disable_ctxsw()
g->ops.gr.reset()
Call the functions directly at all places
Remove CONFIG_NVGPU_DEBUGGER from places where these functions are
called since they are not debugger dependent
This also helps to disable CONFIG_NVGPU_DEBUGGER and to keep recovery
sequence intact
Jira NVGPU-3506
Change-Id: Id2b208ca23dc4667e78edcd8ad242a8558e0ff64
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
