Add supper surface gpu_va details to super surface header member
as needed by PMU ucode to process.
This is required for iGPU PMU ucode on nvgpu-next to process command
line args and ACK back with INIT message, without this PMU ucode ends
up in hang due to DMA wait.
Update super-surface details to cmd line args for PMU ucode to
know the starting address of super-surface in SYSMEM.
JIRA NVGPU-5186
Change-Id: I56d7d3e28527e46707663c97bc8e2a58000c7f5a
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376364
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rework regops execution API to accomodate below updates for new
profiler design
- gops.regops.exec_regops() should accept TSG pointer instead of
channel pointer.
- Remove individual boolean parameters and add one flag field.
Below new flags are added to this API :
NVGPU_REG_OP_FLAG_MODE_ALL_OR_NONE
NVGPU_REG_OP_FLAG_MODE_CONTINUE_ON_ERROR
NVGPU_REG_OP_FLAG_ALL_PASSED
NVGPU_REG_OP_FLAG_DIRECT_OPS
Update other APIs, e.g. gr_gk20a_exec_ctx_ops() and validate_reg_ops()
as per new API changes.
Add new API gk20a_is_tsg_ctx_resident() to check context residency
from TSG pointer.
Convert gr_gk20a_ctx_patch_smpc() to a HAL gops.gr.ctx_patch_smpc().
Set this HAL only for gm20b since it is not required for later chips.
Also, remove subcontext code from this function since gm20b does not
support subcontext.
Remove stale comment about missing vGPU support in exec_regops_gk20a()
Bug 2510974
Jira NVGPU-5360
Change-Id: I3c25c34277b5ca88484da1e20d459118f15da102
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389733
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In nvgpu_dbg_gpu_ioctl_smpc_ctxsw_mode(), check if SMPC global mode
capability is supported instead of checking for the function pointer.
Enable the capability only for Turing since pre-Turing GPUs don't
support it.
Bug 2510974
Jira NVGPU-5360
Change-Id: I352fb2a91b836cd8ef727966a53a28255d8ea834
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389653
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- NvRmGpuDeviceSetSmDebugMode uses regops interface.
- NvRmGpuDeviceTriggerSuspend, NvRmGpuDeviceWaitForPause,
and NvRmGpuDeviceResumeFromPause should return error on Pascal+. Use
regops interface to suspend/resume.
- On non-cilp devices(Maxwell), NvRmGpuDeviceTriggerSuspend,
NvRmGpuDeviceWaitForPause, NvRmGpuDeviceResumeFromPause and
NvRmGpuDeviceSetSmDebugMode are used when debugger(including coredump,
memcheck) is attached or when CUDA application uses a syscall that
requires traphandler(assert, cnp).
Bug 2558022
Bug 2559631
Bug 2706068
JIRA NVGPU-5502
Change-Id: I9eb2ab0c8c75c50f53523d8bf39c75f98b34f3f0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376159
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create new dev nodes for device and context profilers. Example of dev
nodes on iGPU
/dev/nvhost-prof-dev-gpu - device scope profiler
/dev/nvhost-prof-ctx-gpu - context scope profiler
Add below APIs to open/close above dev nodes :
nvgpu_prof_dev_fops_open()
nvgpu_prof_ctx_fops_open()
nvgpu_prof_fops_release()
Add common API nvgpu_prof_fops_ioctl() to handle IOCTL call on these
dev nodes. Add IOCTL NVGPU_PROFILER_IOCTL_BIND_CONTEXT to bind the TSG
to profiler objects.
Add nvgpu_tsg_get_from_file() to retrieve TSG struct pointer from
file descriptor. Also store profiler object pointer into TSG struct.
Enable NVGPU_SUPPORT_PROFILER_V2_DEVICE capability on gv11b and tu104.
Note that this is not yet enabled for vGPU.
Keep NVGPU_SUPPORT_PROFILER_V2_CONTEXT capabiity disabled since this
will take longer to support.
Add new IOCTL NVGPU_PROFILER_IOCTL_UNBIND_CONTEXT so that userspace can
explicitly unbind the context and release the resources before closing
the profiler descriptor.
Add context_init flag to profiler object for book keeping.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ie07e0cfd5a9da9d80008f79c955c7ef93b4bc60f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2384354
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
If recovery sequence profiling is enabled skip the debug dump that
happens during an MMU fault. This prevents the debug dump from
dominating the time spent by the recovery sequence. The debug dump
is severly limited in speed by the (lack of) UART bandwidth.
JIRA NVGPU-5606
Change-Id: Ifc7c326d33d9115d58b13c0fa42ec4bb7acb3075
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2382591
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
During recovery, we set ch->unserviceable at the end after we preempt
the TSG and reset the engines. It might be too late and user-space
might submit more work to the broken channel which is not desirable.
Move setting this unserviceable flag right at the start
of recovery sequence.
Another thread doing a submit can still read the unserviceable flag
just before it is set here, leaving that submit stuck if recovery
completes before the submit thread advances enough to set up a post
fence visible for other threads. This could be fixed with a big lock
or with a double check at the end of the submit code after the job
data has been made visible.
We still release the fences, semaphore and error notifier wait queues
at the end; so user-space would not trigger channel unbind while
channel is being recovered.
Also, change the handle_mmu_fault APIs to return void as the
debug_dump return value is not used in any of the caller APIs.
JIRA NVGPU-5843
Change-Id: Ib42c2816dd1dca542e4f630805411cab75fad90e
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2385256
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
During recovery, we preempt the faulty TSG from PBDMA and engines.
If the TSG preempt on PBDMA times out(timeout = 100ms), the PBDMA
might be hung state. We do not reset the HOST during recovery, so
stuck PBDMAs are unrecoverable.
Abort the recovery and trigger GPU to quiesce as there is no way
back.
Triggering Quiesce from recovery sequence should be fine as the only
redundant operation will be write to FIFO_RUNLIST_PREEMPT register.
The error notifiers will eventually be set by Quiesce thread.
Bug 2768005
JIRA NVGPU-4631
Change-Id: I914b9379aa8e48014e6ddace9abe47180a072863
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2368187
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, NVGPU_SUPPORT_FECS_CTXSW_TRACE enabled flag is set to true
when fecs_trace s/w setup is executed successfully. Sometimes,
fecs_trace is required to be disabled for debugging. This change will
help disable/enable fecs_trace feature by modifying one of the enabled
flags.
Enable NVGPU_SUPPORT_FECS_CTXSW_TRACE during chip specific hal init.
Control fec_trace init and ctxsw dev open depending on
NVGPU_SUPPORT_FECS_CTXSW_TRACE flag status.
JIRA NVGPU-5616
Change-Id: Id0754a5af7cd95a67a1f0ae5de36115d44e1111b
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2357501
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_perfbuf_map() allocates perfbuf VM, maps the user buffer into new
VM, and then triggers gops.perfbuf.perfbuf_enable(). This HAL then does
following :
- Allocate perfbuf instance block
- Initialize perfbuf instance block
- Reset stream buffer
- Program instance block address in PMA registers
- Program user buffer address into PMA registers
New profiler interface will have it's own API to setup PMA strem, and
it requires above setup to be done in two phases of perfbuf
initialization and then user buffer setup.
Split above functionalities into below functions
- nvgpu_perfbuf_init_vm()
- Allocate perfbuf VM
- Call gops.perfbuf.init_inst_block() to initialize perfbuf instance
block
- gops.perfbuf.init_inst_block()
- Allocate perfbuf instance block
- Initialize perfbuf instance block
- Program instance block address in PMA registers using
gops.perf.init_inst_block()
- In case of vGPU, trigger TEGRA_VGPU_CMD_PERFBUF_INST_BLOCK_MGT
command to gpu server
- gops.perf.init_inst_block()
- Reset stream buffer
- Program user buffer address into PMA registers
Also add corresponding cleanup functions as below :
gops.perf.deinit_inst_block()
gops.perfbuf.deinit_inst_block()
nvgpu_perfbuf_deinit_vm()
Bug 2510974
Jira NVGPU-5360
Change-Id: I486370f21012cbb7fea84fe46fb16db95bc16790
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2372984
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The driver configures the sm hww global, warp ESR report masks during poweron
as part of gops_gr.gr_init_support. However, during golden context init, these
are overwritten with default entries from sw_ctx_load list; this leaves the
report masks in a state inconsistent with the driver expectation.
The driver should configure the sm hww warp, global ESR report masks during
golden context init and not before it; Hence, move set_hww_esr_report_mask from
power-on path to golden context init.
In addition, update set_hww_esr_report_mask to do RMW, so as to retain the
values loaded from sw_ctx_load list.
Update global ESR report mask to enable all exceptions.
Bug 3029888
Bug 2997718
Change-Id: Id7ad4cff5409982143f49695c95c5e1d1c9fdec9
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367466
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below change added capability check in the ioctl. nvgpu is advertising
the support for RESCHEDULE_RUNLIST for all processes even though it
fails the ioctl for non-realtime processes.
Clear the ioctl flag for RESCHEDULE_RUNLIST for non-realtime processes.
commit 838ba0a14d ("gpu: nvgpu: check capability for reschedule runlist submit flag")
Author: David Li <davli@nvidia.com>
Date: Tue Sep 12 18:37:00 2017 -0700
NVGPU_SUBMIT_GPFIFO_FLAGS_RESCHEDULE_RUNLIST is only used by realtime
priority EGL context, which checks for CAP_SYS_NICE during context
creation in userspace, so it wasn't secure against unprivileged program
spoofing submit ioctl with this flag to stall GPU progress of others.
This flag does increase duration of submit by approx 16us,
mostly due to register accesses and PMU FIFO mutex.
Bug 2823941
Change-Id: Iecee3989e5af035264b1ed5c1aa9a8576dd90883
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2372957
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Kstable branch is getting rid of all downstream patches. This also
removes support for NVGPU build as kernel overlays will no longer be
supported.
In order to move towards a uniform out of tree build
system, nvgpu must manage the CONFIGS present in Kconfig itself and stop
relying on Kconfigs.
A new file Makefile.linux.configs is created to house these configs temporarily.
This file is included as part of the linux Makefile. Eventually the plan is to
move towards using Makefile.shared.configs.
This takes us one more step closer to having out of tree module building
for NVGPU internal builds.
With this change, kstable can still go ahead with building extmod builds for NVGPU.
This also allows downstream builds to continue as in-tree builds as long as the
overlays are set for the downstream kernels.
Bug 200617256
Change-Id: I78aae6b02521e2a07e8e74aa401ffdfaf9d8cf7c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369209
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of allocating priv data for all external buffers, allocate
only on a demand basis for when compression is requested either in CDE
or via libnvrm_gpu.
This will allow allocators like nvidia-drm to use non-compressed
buffers without needing to avoid the core drm checks.
e.g. drm_gem_prime_import_dev that checks for
if (dma_buf->ops == &drm_gem_prime_dmabuf_ops)"
This patch also gets rid of optimization of dma_buf's attach/detach
calls. Now, nvgpu instead needs to call attach/detach for everytime
the dmabuf fd is imported.
Change-Id: Idefd269b32974106e85ff09e17ebc752b92f830c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2372213
Tested-by: Yogish Kulkarni <yogishk@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
While booting LS falcons, gr.falcon.bind_instblk gops is
used to bind WPR VA to gr falcon. Only FECS_METHOD must be
used to bind instblks. But at this point FECS falcon is not loaded
and running. Hence FECS_METHOD cannot be used to bind this instblk.
Besides that, this code is not required
for successful falcon boot and functioning of chips other
than gm20b.
JIRA NVGPU-5323
Change-Id: I148ccc77d65d5f01adbba6261369e7a292dccfc3
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369736
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
