Add the following gr gops functions:
- enable_gpc_crop_hww
- enable_gpc_zrop_hww
- handle_gpc_crop_hww
- handle_gpc_zrop_hww
- handle_gpc_rrh_hww
These gr gops will be used in nvgpu-next.
Add function: nvgpu_gr_rop_offset to compute rop pri offsets.
Jira: NVGPU-5237
Change-Id: I9e2437c1d2893238b16ec7a134543e20c81b49f7
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335687
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The FIFO pbdma map is an array of bit maps that link PBDMAs to runlists.
This array allows other software to query what PBDMA(s) serves a given
runlist. The PBDMA map is read verbatim from an array of host registers.
These registers are stored in a kmalloc()'ed array.
This causes a problem for the device management code. The device
management initialization executes well before the rest of the FIFO
PBDMA initialization occurs. Thus, if the device management code
queries the PBDMA mapping for a given device/runlist, the mapping has
yet to be populated.
In the next patches in this series the engine management code is subsumed
into the device management code. In other words the device struct is
reused by the engine management and all host SW does is pull pointers to
the host managed devices from the device manager. This means that all
engine initialization that used to be done on top of the device
management needs to move to the device code.
So, long story short, the PBDMA map needs to be read from the registers
directly, instead of an array that gets allocated long after the device
code has run.
This patch removes the pbdma map array, deletes two HALs that managed
that, and instead provides a new HAL to query this map directly from
the registers so that the device code can use it.
JIRA NVGPU-5421
Change-Id: I5966d440903faee640e3b41494d2caf4cd177b6d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2361134
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Adjust documentation and validity checks in the fence functions for
simplicity.
Now that the cde code is using user fences cleanly, the
do-nothing-on-null action can cause unintended behaviour in new code
using nvgpu_fence_get and nvgpu_fence_put. It does not make sense to
call these with a null fence, so delete the checks.
Extend the documentation in nvgpu_fence_extract_user() for the os fence
lifetime to give a reason for the dup call.
Make nvgpu_fence_from_semaphore() and nvgpu_fence_from_syncpt() return
void. These fill a previously allocated object; the only failure would
have been a null object, but that never happens and is not acceptable
behaviour for callers so delete these null checks and fix types.
Jira NVGPU-5248
Change-Id: I9f82365d50ab5600374c8f7dd513691eac14a2f1
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359624
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The stored fence in struct gk20a_buffer_state is a post fence of a
previous cde preparation job, if any. This stored fence is passed to
userspace via NVGPU_GPU_IOCTL_PREPARE_COMPRESSIBLE_READ in case a
preparation job was necessary to fulfill the request. As nothing else is
needed from the fence, make it just a struct nvgpu_user_fence.
Add nvgpu_user_fence_clone() for copying this user fence because it's
stored internally and returned to userspace. The refcounted os fence
needs special care. Now that the API is not so trivial anymore, add some
documentation.
Jira NVGPU-5248
Jira NVGPU-5493
Change-Id: I8bc4d52eaab7c7cbc5573b331e72e1d853f9f057
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359065
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch removes the reporting of _ECC_CORRECTED errors which are
not applicable to GV11B. Specifically, this patch removes the code
related to the reporting of the following service IDs:
NVGUARD_SERVICE_IGPU_SM_SWERR_LRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_CBU_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_PMU_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GPCCS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_FECS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GCC_SWERR_L15_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_FA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_L2TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PTE_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PDE0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_MISS_FIFO_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_S2R_PIXPRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_TSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_RSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_DSTG_BE_ECC_CORRECTED
Bug 200616002
Change-Id: I199c396f9f6a6be007bd6d3c556199b5a73c3c91
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2349587
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Decouple the fence information needed for providing submit postfences to
userspace by adding a separate type for that and using it to pass fence
data to ioctls.
The data in struct nvgpu_fence_type is used in various places:
- job tracking needs to know when a post fence is expired
- job submitters within the driver (vidmem clears) need to be able to
wait for these fences
- userspace needs the fence as an id, value pair or as a file descriptor
created from an os fence
To keep object lifetimes strict, start decoupling the os fence data out
of struct nvgpu_fence_type: delete nvgpu_fence_install_fd() and add
nvgpu_fence_extract_user() to return a struct nvgpu_user_fence that
contains only the necessary information. Storing the os fence in job
tracking metadata is legacy code and not useful. Passing the os fence
from where it's created through the whole submit path inside this
combined fence type has been convenient, though.
The internally stored cde job fence in dmabuf compression metadata is
still nvgpu_fence_type to keep this patch simple.
Jira NVGPU-5248
Change-Id: I75b7da676fb6aa083828f888c55571bbf7645ef3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359064
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The os fences can currently be constructed from a file descriptor, from
a raw syncpt id/value pair, or a struct nvgpu_semaphore. Each os fence
object has exactly one owner for simplicity as the owner is a wrapper
for a refcounted object. This does not allow copying the fences, so
extend struct nvgpu_os_fence_ops with a member to increment the refcount
of the underlying fence. This can be used to "duplicate" the object. The
copy needs an eventual call to ops->drop_ref() to release the refcount.
This will be useful to decouple the features of struct nvgpu_fence_type
needed in the kernel and those needed for userspace.
Jira NVGPU-5248
Change-Id: Ie7b943f0851f62842e941a7283b389bac84ae9ae
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359063
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Nvgpu does not support nested interrupts and as a result priv/pbus
interrupt do not reach cpu while other interrupts on intr_0 (stall)
tree are being processed. This issue is not specific to priv/pbus
but since pbus errors are critical, it is important to detect it
early on.
Below is the snippet from one of the failing logs where nvgpu
is doing recovery to process gr interrupt.
Right after GR engine is reset (PGRAPH of PMC_ENABLE), failing priv
accesses should have triggered pbus interrupt but it does not reach cpu
until gr interrupt is handled. Any interrupt that requires recovery will
take longer to finish isr as recovery is done as part of isr.
Also intr_0 (stall) interrupts are paused while stall interrupt is being
processed.
gm20b_gr_falcon_bind_instblk:147 [ERR] arbiter idle timeout, status: badf1020
gm20b_gr_falcon_wait_for_fecs_arb_idle:125 [ERR] arbiter idle timeout, fecs ctxsw status: 0xbadf1020
Fix to detect pbus intr while other stall interrupts are being processed
is to move pbus intr enable/disable/clear/handle to nonstall (intr_1)
tree. Configure pbus_intr_en_1 to route pbus to nostall tree.
Priv interrupts cannot be moved to nonstall (intr_1) tree due
to h/w not supporting this.
In Turing, moving pbus intr to nonstall is not feasible as mc_intr(1)
tree is deprecated. Add Turing specific stall intr handler hals with
original logic to route pbus intr to mc_intr(0).
JIRA NVGPU-25
Bug 200603566
Change-Id: I36fc376800802f20a0ea581b4f787bcc6c73ec7e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354192
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The current debugfs code is completely specific to FIFO's kickoff
profiler. But exposing these debugfs nodes is really a perfectly
generic operation to any given profiler.
Therefore add a generic debugfs interface for exposing profilers.
Any code that implements a profiler can now use a single function
call to export a profiler to the GPU debugfs area.
JIRA NVGPU-5606
Change-Id: I67a5bd9998fcfac94678e465442b9a38ab7e7612
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2358382
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a generic profiler based on the channel kickoff profiler. This
aims to provide a mechanism to allow engineers to (more) easily profile
arbitrary software paths within nvgpu.
Usage of this profiler is still primarily through debugfs. Next up is
a generic debugfs interface for this profiler in the Linux code.
The end goal for this is to profile the recovery code and generate
interesting statistics.
JIRA NVGPU-5606
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: I99783ec7e5143855845bde4e98760ff43350456d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355319
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This adds a new device management unit in the common code responsible
for facilitating the parsing of the GPU top device list and providing
that info to other units in nvgpu.
The basic idea is to read this list once from HW and store it in a
set of lists corresponding to each device type (graphics, LCE, etc).
Many of the HALs in top can be deleted and instead implemented using
common code parsing the SW representation.
Every time the driver queries the device list it does so using a
device type and instance ID. This is common code. The HAL is responsible
for populating the device list in such a way that the driver can
query it in a chip agnostic manner.
Also delete some of the unit tests for functions that no longer
exist. This code will require new unit tests in time; those should be
quite simple to write once unit testing is needed.
JIRA NVGPU-5421
Change-Id: Ie41cd255404b90ae0376098a2d6e9f9abdd3f5ea
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319649
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In Bug 200588835, the spurious FBPA interrupts are seen on couple
of boards. These interrupts were found to be EDC (Error detection
and Correction) interrupts which are triggered due to ECC errors.
The EDC registers are not exposed to the driver, so the interrupt
status register cannot be cleared; resulting in interrupt storm.
Also, it was concluded that only bad HW can cause this failure
scenario. So, in the ISR for FBPA interrupts, get the GPU into
quiesce state as we don't expect the GPU to be in usable state post
such unrecoverable errors.
Adapt the quiesce code for Linux build too.
1. On Linux, we cannot exit the nvgpu process after quiesce like we
do on QNX. So, add nvgpu_disable_irqs() call to quiesce
implementation which is done as part of process exit handler on
QNX. Masking interrupts which is already done as part of quiesce
would be sufficient in most cases, but to be fail-safe
disable_irqs too.
3. Also, the IOCTL code looks at g->sw_ready, hence add
nvgpu_start_gpu_idle() to set g->sw_ready to false along with
setting NVGPU_DRIVER_IS_DYING = true.
We expect the nvgpu_sw_quiesce() call to finish before quiesce thread
wakes up from 50ms sleep. Hence, critical step like
nvgpu_start_gpu_idle() is added to nvgpu_sw_quiesce(), whereas the
somewhat redundant disable IRQs call is added to quiesce thread.
nvgpu_fifo_quiesce() was called twice by mistake; remove one of the
them.
Bug 2919899
Bug 200588835
Change-Id: I9beec688c2e1c0d8dfc1327ddf122684576f8684
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354537
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The valid flag in struct nvgpu_fence_type is not very useful. It's set
when a fence is created on an allocated object and read in these three
scenarios:
- nvgpu_fence_install_fd() after a submit, if the submit was successful.
A successful submit implies that a post fence exists.
- nvgpu_fence_wait() for a copyengine job when synchronizing the ce
ringbuffer or when waiting for vidmem clears. In these cases the fence
is also clearly always valid.
- nvgpu_fence_is_expired() when testing whether a tracked job has
completed. Such jobs cannot exist without post fences that are
mandatory for tracking, so the fence must exist.
Remove the valid flag. Remove also the other init checks from the above
functions; they're equally unused and confusing implying that such calls
would be acceptable, causing sloppy code at best.
Jira NVGPU-5248
Jira NVGPU-5493
Change-Id: I52c5be1569b343024d2626bd9577f87b46064fba
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2357828
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The differences between sync_fence ("android sync") and dma_fence are
abstracted away by nvhost in the nvhost_fence interface. There is no
need to have separate android and dma os fences for syncpoints; unify
the general implementation so that it's always used when requested for
the build.
Jira NVGPU-5386
Change-Id: Ia829e93e18d03064ff46ab1271547de2d1fb1cae
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2356158
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement empty stubs of the channel watchdog functions for when
watchdog is disabled from build. Add some forward declarations that were
missing. Now most call sites don't need #idefs for the build flag.
Add error checks for the wdt alloc failure.
Jira NVGPU-5494
Jira NVGPU-5493
Change-Id: I2d42e8ab4c5e045cd280b2e1f254396127bd154b
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2352050
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, nvgpu_writel_loop() writes to a register and immediately
checks if register value is updated. It might take some time for
hardware registers to get updated with value written by software.
Modify nvgpu_writel_loop() to accept number of retries to check if
register value is updated and assert with nvgpu_assert().
Also, move nvgpu_writel_loop() to common code and use generic
nvgpu_readl() and nvgpu_writel() APIs.
JIRA NVGPU-5490
Change-Id: Iaaf24203a91eee3d05de7d0c7dea18113367de5f
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2348628
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Historically, nvgpu has supported a struct gk20a_dmabuf_priv and
associated it with a dmabuf instance. This was aided by Nvmap's
dma_buf_set_drv_data() and dma_buf_get_drvdata() APIs. gk20a_dmabuf_priv
is used to store Comptag IDs i.e. (1 per 64 kb) as well as can store the
dmabuf attachments to avoid multiple attach/detach calls. dma_buf_set_drv_data()
allows Nvgpu to associate an instance of struct gk20a_dmabuf_priv with the instance
of the dmabuf and also provide a release callback to delete the
instance when the last reference to the dmabuf is put. Nvmap accomplishes
this by modifying the struct dma_buf_ops definition to include the
set_drv_data and get_drv_data callbacks in the kernel code.
The above approach won't work for upstream Kstable and Nvmap
plans to remove these APIs for upcoming newer downstream kernels as
well.
In order to implement the same functionality without depending on Nvmap,
Nvgpu will implement a release chaining mechanism. Dmabuf's 'ops' pointer
points to a constant struct and hence a whole copy of the ops is made
followed by altering the new copy's release pointer.
struct gk20a_dmabuf_priv stores the new copy and the dmabuf's 'ops' is
changed to point to this. This allows Nvgpu to retrieve
the corresponding gk20a_dmabuf_priv instance using container_of.
Nvgpu's custom release callback will invoke the original release
callback of the dmabuf's producer as a last step, thus completing the
full circle. In case, the driver is removed, Nvgpu restores the
dmabuf's 'ops' back to the original state. In order to accomplish this,
every instance of a struct nvgpu_os_linux maintains a linkedlist of the
gk20a_dma_buf instances. During the driver removal, this linkedlist is
traversed and the corresponding dmabuf's 'ops' pointer is put back to
its original state followed by freeing of this instance.
Nvgpu is a producer of dmabuf's for vidmem and needs
a way to check whether the given dmabuf belongs to itself.
Its no longer reliable to depend on a comparision of
the 'ops' pointer. Instead dmabuf_export_info() allows a name to be set by the
exporter and this can be used to compare with a memory location
that belongs to Nvgpu. Similarly for sysmem dmabufs, Nvmap makes a
similar change in the way it identifies whether a dmabuf belongs to
itself.
Removed NVGPU_DMABUF_HAS_DRVDATA and moved to a unified mechanism for
both downstream as well as upstream kernel.
Some of the other changes in this file include the following.
1) Deletion of dmabuf.c and moving its contents over to dmabuf_priv.c
2) Replacing gk20a_mm_pin_has_drvdata with nvgpu_mm_pin_privdata and
vice-versa for unpin.
Bug 2878569
Change-Id: Icf8e79b05a25ad5a85f478c3ee0fc1eb7747e22d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2341001
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, ltc fs_state is initialized during ltc init support. However,
ltc cbc_param and cbc_param2 registers do not seem to be providing
correct data if ltc.init_fs_state is called before fb.init_fs_state.
- Create fb.init_fb_support hal to initialize fb.
- Trigger init_fb_support before init_ltc_support.
Bug 2969956
Bug 2957808
JIRA NVGPU-4666
Change-Id: I54d697d27b9d9c6318c4ef459d215b6f82cd5571
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2345673
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make Recovery and quiesce co-exist to support quiesce state
on unrecoverrable errors. Currently, the quiesce code is wrapped
under ifndef CONFIG_NVGPU_RECOVERY. Isolate the quiesce code from
recovery config, thereby enabling it on all builds.
On Linux, the hung_task checker(check_hung_uninterruptible_tasks()
in kernel/hung_task.c) complains that quiesce thread is stuck for
more than 120 seconds.
INFO: task sw-quiesce:1068 blocked for more than 120 seconds.
The wait time of more than 120 seconds is expected as quiesce
thread will wait until quiesce call is triggered on fatal
unrecoverable errors. However, the INFO print upsets the
kernel_warning_test(KWT) on Linux builds. To fix the failing
KWT, change the quiesce task to interruptible instead of
uninterruptible as checker only looks at uninterruptible tasks.
Bug 2919899
JIRA NVGPU-5479
Change-Id: Ibd1023506859d8371998b785e881ace52cb5f030
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2342774
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Disable the somewhat non-useful syncpoint debug spew in the nvgpu
debug spew. The GPU has it's own snapshot view of syncpoints so
visibility into other syncpoint data is often not very helpful.
However, there are plausibly times where this would be necessary.
For example debugging a sync issue between the GPU and some other
SoC engine. Therefore, the syncpoint debug spew can be enabled
again at runtime if necessary.
JIRA NVGPU-5541
Change-Id: I7028e2d6027e41835b2fed4f2bbb366c16b99967
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2349185
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
