Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses RPC to get target voltage for a freq, though this gets
the latest Voltage, there could be mismatch b/w data in nvgpu & PMU.
To make it consistent, use the local VF table for getting the voltage.
Also the slave ratio calculation is inaccurate due to quantization.
So instead of calculating, use the slave ratio from parsed vbios table.
Bug 200545403
Change-Id: Ibb064f2a0f5eba77166e2b3f9868da9e3fcc7193
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2183546
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added version and reseved elements in
nv_pmu_clk_clk_vin_device_boardobjgrp_set_header struct.
- Added volt_rail_idx, por_override_mode and override_mode
elements are added in nv_pmu_clk_clk_vin_device_boardobj_set
struct.
- Implemented parsing the above elements from vbios table.
- Moved from cmd to rpc in vin_load function.
- Changed the global macros of clk domain which matches to
PMU firmware for easy reference.
NVGPU-3743
Change-Id: I0189548fce19d65193203fbf6317c4a04147bf5a
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2163135
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 2.2 defines dead code as "operations which are executed but
removal of these operations has no effect on program behavior".
Variable initializations violate this rule if initialized value is not
used and replaced.
This patch fixes some of these reported violations.
Jira NVGPU-858
Change-Id: I694517ace8884c78c63f6346e455078d19b70b4d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110459
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. This patch contains fixes for all 17.7 violations
in the nvgpu.common.pmu.clk.* units.
JIRA NVGPU-3035
Change-Id: I13863f43c6bea76917978a12df091a672a3e5098
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108887
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved nvgpu_clk_pmupstate structure from gk20a to
nvgpu_pmu.The aim is to have single pmu structure inside
gk20a, that is "nvgpu_pmu" struct and all the global
structures of all units in PMU should be included in
"nvgpu_pmu" struct.
NVGPU-3220
Change-Id: I531aab568a692c55e640ca2c33aa7508b83a9593
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104129
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Description:
Present p-state unit handle both pstate boardobj and
initializing all the units. As part of restructuring,
the pstate unit is separated into two units:
1) Perf_pstate: This unit will handle pstate boardobjs.
2) Pmu_pstate: This unit will initialize all the units
which supoort performance states.
Changes:
1) Created pmu_pstate unit.
2) Pstate boardobjs are moved under perf_pstate which
is under perf unit.
NVGPU-1958
Change-Id: I2c428adfe6de4992c9eeda0d4356d30290f6e8a4
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2096339
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pmu_ipc.c had functionality for rpc response handling and message cond
checks. This patch moves them to msg unit. And prepare cmd.h to group
together structs and functions related PMU commands.
JIRA NVGPU-1970
Change-Id: Iec5d72d02ab3ee51963631c828b301c56af8dc48
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079146
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Description:
nvgpu_clk_pmupstate is the global structure in clk units. It is declared
in clk.h and all clk units will include clk.h header.
nvgpu_clk_pmupstate struct will have structure pointers to all clk units
and will include genereic function pointers which are used by most clk
units. The reason why the function pointers is defined in this sturct,
and not included inside g->ops is because, these are only clk specific
functions and rest of the driver code is not dependent on this.
Each unit will have init function to allocate memory for its structure
and will initialize its local functions.
Changes:
1) Introduced nvgpu_clk_pmupstate in clk.h file. All the changes needed
to call the above struct from individual clk units.
2) Removed cyclic dependency headers in clk units by calling function
through pointers defined in clk.h.
3) Initialization of each unit is done in respective unit instead of
doing it in clk unit. Added *_init_pmupstate and *_free_pmupstate to
individual clk units.
4) Each unit clean up will be done separately while refactoring that
unit.
NVGPU-1963
NVGPU-2965
Change-Id: Iee79d7a812b62407252636057b104f952c94a229
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033537
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following.
1. Remove unused functions from volt_pmu.c.
2. Append public functions with nvgpu.
3. Remove GP106 functions and rename TU104 to generic functions.
4. Rename volt struct from gpu_ops.
5. Remove the unused volt.h header file.
6. Make local functions as static and put in order.
7. Remove unused inclusion on header files.
8. After 4, generic functions can be called directly instead of g->ops.
Jira NVGPU-1956
Change-Id: Icaea0ca817d37cccfc09241baa2f047ec2688169
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2076535
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of regoranizing clk_arb code, This patch does the folowing
1. Move clk_arb HAL files under common/clk_arb unit.
2. Move clk_arb from common/pmu to common/clk_arb.
3. Append public functions with nvgpu.
4. Make local functions as static.
Jira NVGPU-1966
Change-Id: If45c3dbfc4bbe74fe8d30e33e64894d553f3cda5
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2027335
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following.
1. Append public functions with nvgpu.
2. Move public functions & structure to include/pmu/clk.
3. Remove inclusion of HW header files in common.
4. Move FREQ_STEP_SIZE_MHZ to clk_prog.h as it is used there.
5. Fix 16.3 and 11.3 Misra Violations.
Jira NVGPU-1965
Change-Id: I268d257d6de9c986e456a666cf6d633fe10fc440
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2024992
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
1) Separated clk.h which is in /nvgpu/include/pmu
into different units
2) Renamed global functions
Intention: At present /nvgpu/include/pmu/clk.h
consists of structures and functions of different
clock units. It is difficult to work on individual
clk units if this file is not separated into
individual units. All stucts and functions in clk.h
are seperated into different clk units.
Individual private clk units were not touched.
Post this patch, the sebsequent patches would make
changes in the individual clk units.
NVGPU-2707
Change-Id: I7bf9fab38a73bceb451291530a67c70ed343b0cb
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2021704
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
