nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When virtualized, the guest OS has no direct access to
PMU functionality:
- Don't create debugfs entries that rely on PMU access
- Clean up PMU vgpu HAL entries that imply that PMU access
is supported
Bug 200543218
Change-Id: I12730b600802448a240f3de042760041d3ae7d29
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2213650
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 17.1 forbids use of stdarg.h features which are defined for
variable arguments.
This patch modifies logging macros to use slogf function for QNX builds.
This avoids use of variable argument functions used for formatting log
message.
Jira NVGPU-4075
Change-Id: I5b6bb1107a7e431afaa960003858193a477b2ee6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2192016
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs were not enabled before nvgpu_finalize_poweron, so debugging early
init issues such as MMU fault, invalid PRIV ring or bus access etc.
triggered during nvgpu power-on was cumbersome. Hence, Enable the
IRQs before nvgpu_finalize_poweron is called.
In HUB (MMU fault) ISR, MMU fault handling is only limited to snapped
in priv reg in case of fault during nvgpu power-on.
In HUB (MMU fault) ISR, access to fault buffers is synchronized as
nvgpu driver reads the fault buffer registers before proceeding
with fault handling. However, additional MMU fault handling
needs to be synchronized with GR/FIFO/quiesce/recovery setup
through nvgpu power-on state.
JIRA NVGPU-1592
Change-Id: I8a5f2fcd79cb7ad8e215359e7a9fad50bfd46d67
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203861
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
golden image size will be set when memory allocated.
See function:
- nvgpu_gr_obj_ctx_init
If golden image size is 0, gr_golden_image should be a NULL
pointer in most cases. So add NULL pointer checking in
tpc_pg_mask_store to avoid NULL pointer exception.
Bug 2403210
Change-Id: I14df5cd94d7a4418c3089c5f84b6eab93c485ba6
Signed-off-by: Sunny Li <sunnyl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2161280
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ifdef function prototypes with CONFIG_* defines. This fixes MISRA rule
8.6 violations which complain about undefined functions.
Also moved nvgpu_channel_get_from_file prototype to ioctl_channel.h &
nvgpu_probe to driver_common.h as those are linux specific. Define
nvgpu_init_soc_vars in posix/soc.c as it is implemented in QNX.
JIRA NVGPU-3873
Change-Id: I5d2b238e1b5d1318867cd2416ac5f03cc6ab7c6a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196794
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In some cases, we would get deadlock issue due to there are two locks
acquisition on common clk driver's lock and nvgpu driver's locks. At
the bug, inconsistent lock ordering problem will come with one thread
gets "nvgpu lock -> clk lock" and the other thread gets "clk lock ->
nvgpu lock".
Slove the latter path with one-time initializing clk_parent entry
and use cached data afterward.
Bug 2555115
Change-Id: I31c5c2728f406307e7cfd4e555f4db0c163234d8
Signed-off-by: Jeremy Ho <jeremyh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2146727
(cherry picked from commit 42c2bdfb9f)
Reviewed-on: https://git-master.nvidia.com/r/2160290
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replaced ch->mmu_debug_mode_enabled with ch->mmu_debug_mode_refcnt.
If channel is enabled multiple times by userspace, then ref count is
updated accordingly. There is an expectation that enable/disable
calls are balanced for setting channel's mmu debug mode.
When unbinding the channel, decrease refcnt for the channel until it
reaches 0.
Also, removed tsg parameter from nvgpu_tsg_set_mmu_debug_mode as it
can be retrieved from ch.
Bug 2515097
Change-Id: If334e374a55bd14ae219edbfd3b1fce5ff25c226
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2184702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds nvgpu API in linux and posix to query vpr resize.
The new API nvgpu_is_vpr_resize_enabled() is used in
nvgpu_submit_channel_gpfifo().
Previously, if non-deterministic channel has timeout disabled and
GPU cannot railgate on some platform, then channel doesn't power ref
count and results in video freeze. To resolve non-determinstic channel
job tracking needs to be enabled if vpr resize is supported or if GPU
can railgate.
Bug 200532122
Change-Id: Icfbff6253762b195b2f5955749343974b1a7a269
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2171093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For safety build, nvgpu driver should enter SW quiesce state
in case an uncorrectable error has occurred. In this state, any
activity on the GPU should be prevented, without powering off the GPU.
Also, a minimal set of operations should be used to enter SW quiesce
state.
Entering SW quiesce state does the following:
- set sw_quiesce_pending: when this flag is set, interrupt
handlers exit after masking interrupts. This should help mitigate
an interrupt storm.
- wake up thread to complete quiescing.
The thread performs the following:
- set NVGPU_DRIVER_IS_DYING to prevent allocation of new resources
- disable interrupts
- disable fifo scheduling
- preempt all runlists
- set error notifier for all active channels
Note: for channels with usermode submit enabled, userspace can
still ring doorbell, but this will not trigger any work on
engines since fifo scheduling is disabled.
Jira NVGPU-3493
Change-Id: I639a32da754d8833f54dcec1fa23135721d8d89a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2172391
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
CE app functionality from nvgpu is non-safe for igpu. CE engines init
/reset/cg related functionality is required in safety. Hence move the
CE app logic under CONFIG_NVGPU_DGPU flag and update the sources
accordingly.
JIRA NVGPU-3814
Change-Id: I37aa00b1184baccd5fe569ec315be60ac42dac9b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168956
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For dGPU with PCIE interface do not have a thermal alert pin.
Only platforms where dGPU is used with SXM interface have the
thermal alert pin.
This change makes sure that if nvgpu-therm-gpio DT entry is
is missing we don't fail probe but continue with GPU
initialization without enabling thermal alert feature.
Bug 200542024
Change-Id: Iaf3aec9b66695a45daf86ecfdeec398b66f96bfd
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2173495
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In GV11B, read fuse_status_opt_tpc_gpc register
to read which TPCs are floorswept.
- The driver will also read sysfs node: tpc_pg_mask
- Based on these two values "can_tpc_powergate" will
be set to true or false and mask will be used to write to
fuse_ctrl_opt_tpc_gpc register to powergate the TPC.
- can_tpc_powergate = true indicates that the mask value
sent from userspace is valid and can be used to power gate
the desired TPC
- can_tpc_powergate = false indicates that the mask value
sent from userspace is not valid and cannot be used to
power gate the desired TPC.
Bug 200532639
Change-Id: Ib0806e4c96305a13b3574e8063ad8e16770aa7cd
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rule 2.2 doesn't allow unused variable assignments. The reason is
presence of unused variable assignments may indicate error in program's
logic.
Rule 21.x doesn't allow reserved identifier or macro names starting with
'_' to be reused or defined.
Jira NVGPU-3864
Change-Id: I8ee31c0ee522cd4de00b317b0b4463868ac958ef
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2163723
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added PCIE device info for TU104-QS chip & marked as FUSA SKU
using device flag
-is_fusa_sku flag will be set if device flag has FUSA SKU flag set
& this will be checked in driver to execute functionality
specific to FUSA SKU
JIRA NVGPU-3727
Change-Id: I49ea357133ce0b9bbf52dae72afcf8139ab01346
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2161163
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Initialize the clock counters for GPCCLK, XBARCLK, SYSCLK.
This INIT was done in PMU before, but now disabled from TU10A profile.
Hence the initialization is moved into nvgpu.
This patch does the following.
1. Move clock files from GV100 to TU104.
2. Add the Counter HW Registers.
3. Initialize the counter registers for gpc, xbar and sysclk.
4. Change the debug fs node from gv100 to tu104.
5. Update in yaml file with new file names.
Bug 200536091
Change-Id: I436019a18f5c4c73979977666d0c04ce4c569047
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155298
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change switches nvgpu_timeout_peek_expired() to return a bool
instead of an int to remove advisory rule MISRA 10.5 violations.
MISRA 10.5 states that the value of an expression should not be
cast to an inappropriate essential type.
JIRA NVGPU-3798
Change-Id: I5cf9badaf07493e11a639e47ae4cf221700134ff
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155617
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There was a name clash between the nvgpu_set_error_notifier*() APIs and
the SET_ERROR_NOTIFIER IOCTL. Therefore, the APIs were renamed from
nvgpu_set_error_notifier*() to nvgpu_set_err_notifier*(). This rename
was done to fix MISRA 5.x errors.
JIRA NVGPU-1633
Change-Id: I06af551a664b0706f106e853f1ea8733894f11bd
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change switches nvgpu_nvhost_syncpt_is_expired_ext()
to return a bool instead of an int to remove advisory rule
MISRA 10.5 violations.
MISRA 10.5 states that the value of an expression should not be
cast to an inappropriate essential type.
JIRA NVGPU-3798
Change-Id: Ie0772ac7167a3c999129de0dc7f22cd96faa28fc
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159801
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds SWUD (SW Unit Design) document for SDL unit. In addition,
it re-names err_type to err_id in error reporting APIs related to ECC, GR,
PRI and MMU, to keep the name consistent with other APIs.
JIRA NVGPU-3758
Change-Id: I968218574aa78144497fc12bd6dab20d1be7aa1c
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2151092
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
VBIOS version is only available if dGPU has already been
powered on. Make sure dGPU is powered-on before accessing
VBIOS version information.
Bug 200528528
Change-Id: I80915d61245a622f7d5273c5fbddb03cc22885e2
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2150447
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
