Currently the vGPU engine management rewrites a lot of the common
device agnostic engine management code.
With the new top HAL parsing one device at a time, it is now more
easily possible to tie the vGPU into the new common device framework
by implementing the top HAL but with the vGPU engine list backend.
This lets the vGPU inherit all the common engine and device
management code. By doing so the vGPU HAL need only implement a
trivial and simple HAL.
This also gets us a step closer to merging all of the CE init
code: logically it just iterates through all CE engines whatever
they may be. The only reason this differs between chips is because
of the swap from CE0-2 to LCEs in the Pascal generation. This could
be abstracted by the unit code easily enough.
Also, the pbdma_id for each engine has to be added to the device
struct. Eventually this was going to happen anyway, since the
device struct will soon replace the nvgpu_engine_info struct.
It's a little bit of an abuse but might be worth it long term. If
not, it should not be difficult to replace uses of dev->pbdma_id
with a proper lookup of PBDMA ID based on the device info.
JIRA NVGPU-5421
Change-Id: Ie8dcd3b0150184d58ca0f78940c2e7ca72994e64
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2351877
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove an ancient piece of code that morphed from a hard coded fault ID
lookup in the original gk20a driver. In the old days there was no top
parsing code, so converting between engine ID and fault ID was done
by a simle function.
This code derived from that function for some reason. However, given
that the HW top table is not actually broken, this code never executes.
The only way this code would execute is if the HW top table reported
that the fault ID for a GRCE engine is 0. But this never happens.
JIRA NVGPU-5420
Change-Id: If8483faa9878f752c29ef6eadc1a56ce1de81942
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2362865
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The FIFO pbdma map is an array of bit maps that link PBDMAs to runlists.
This array allows other software to query what PBDMA(s) serves a given
runlist. The PBDMA map is read verbatim from an array of host registers.
These registers are stored in a kmalloc()'ed array.
This causes a problem for the device management code. The device
management initialization executes well before the rest of the FIFO
PBDMA initialization occurs. Thus, if the device management code
queries the PBDMA mapping for a given device/runlist, the mapping has
yet to be populated.
In the next patches in this series the engine management code is subsumed
into the device management code. In other words the device struct is
reused by the engine management and all host SW does is pull pointers to
the host managed devices from the device manager. This means that all
engine initialization that used to be done on top of the device
management needs to move to the device code.
So, long story short, the PBDMA map needs to be read from the registers
directly, instead of an array that gets allocated long after the device
code has run.
This patch removes the pbdma map array, deletes two HALs that managed
that, and instead provides a new HAL to query this map directly from
the registers so that the device code can use it.
JIRA NVGPU-5421
Change-Id: I5966d440903faee640e3b41494d2caf4cd177b6d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2361134
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This adds a new device management unit in the common code responsible
for facilitating the parsing of the GPU top device list and providing
that info to other units in nvgpu.
The basic idea is to read this list once from HW and store it in a
set of lists corresponding to each device type (graphics, LCE, etc).
Many of the HALs in top can be deleted and instead implemented using
common code parsing the SW representation.
Every time the driver queries the device list it does so using a
device type and instance ID. This is common code. The HAL is responsible
for populating the device list in such a way that the driver can
query it in a chip agnostic manner.
Also delete some of the unit tests for functions that no longer
exist. This code will require new unit tests in time; those should be
quite simple to write once unit testing is needed.
JIRA NVGPU-5421
Change-Id: Ie41cd255404b90ae0376098a2d6e9f9abdd3f5ea
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319649
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The gk20a_debug_dump() function implicitly adds a newline since it
uses nvgpu_err() under the hood (for uart destined prints). For the
seq_file destined writes it does not so there is an annoying inconsistency.
Remove the newline that many of the gk20a_debug_dump() calls add and add
the newline to the (now) seq_printf() call. This reduces the length of
debug dump logs and speeds them up - UART is _very_ slow after all.
Also cleanup some formatting issues in the various debug prints I
happened to notice.
JIRA NVGPU-5541
Change-Id: Iabf853d5c50214794fc4cbb602dfffabeb877132
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2347956
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Channel debug_dump hal function does not involve
any register related code.
Move gv11b_channel_debug_dump hal function to
common code nvgpu_channel_info_debug_dump function.
Check gpu hw version to limit instance variables
dump that differs between socs.
Add new hal pointer syncpt_debug_dump for pbdma.
Jira NVGPU-5109
Signed-off-by: Vinod G <vinodg@nvidia.com>
Change-Id: Icfca837ce8e4117387cffa6fadf6c094c7da5946
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2321016
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gm20b_channel_bind an nvgpu_smp_wmb() was used presumably to
prevent MMIO writes from being re-ordered after the memory write
to 'ch->bound'. If that was to happen, then unbind routine could
observe the channel as bound and issue concurrent MMIO writes
to unbind the channel. Assuming, the barrier was to prevent
such race, it should have been an nvgpu_wmb(), since
nvgpu_smp_wmb() is for inner shareable domain only.
However, the race possibility between unbind called from close
path and bind from ALLOC_GPFIFO should be ruled out because
close will wait for any active devctl/ioctl to finish before
proceeding.
The race possibility between unbind called from
suspend_all_serviceable_ch path and bind from ALLOC_GPFIFO should
be ruled out because ALLOC_GPFIFO has power refcount at the start
of devctl/ioctl and suspend_all_serviceable_ch is called from
prepare_poweroff path which ensure that power refcount is 0.
Removed nvgpu_smp_wmb().
Jira NVGPU-4927
Change-Id: Ic4f072df364926c10be84e42b83394c13fc97fdc
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298959
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Rule 2.5 states that a project should not contain unused
macro declarations.
While most of the violations in the nvgpu driver are due to unused
macros from hw headers, devinit-related headers, etc. there is a small
number that are due to things like:
* macros not being used when they could/should be
* macros in C files that are really not referenced
* CPP build flag mismatches
This change eliminates such violations from the following:
* replace constants with existing macros in timeout conversion code
* wrap nvgpu_gmmu_dbg macro #defines in #ifdef CONFIG_NVGPU_TRACE/#endif
* wrap MAX_MC_INTR_REGS #define in #ifdef CONFIG_NVGPU_NON_FUSA/#endif
* remove unused FECS_MAILBOX_0_ACK_RESTORE from runlist code
* wrap BACKTRACE_MAXSIZE macro with #ifndef _QNX_SOURCE/#endif
Jira NVGPU-3178
Change-Id: I2bc72f706d7af3f8e7b062126e8543d0dc8ac250
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284419
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gm20b_pbdma_handle_intr is only initializing pbdma_status
when either pbdma_intr_0 or pbdma_intr_1 is pending.
This could lead to using non-initialized chsw_status in
gv11b_fifo_preempt_poll_pbdma, and causing unexpected
failures in unit tests.
Read pbdma_status before checking for pbdma interrupts,
to make sure pbdma_status contains valid data.
Jira NVGPU-4887
Change-Id: If1bdb24ae04b58e85e4217c9c0854c01ca65525b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2279111
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Directive 4.5 states that identifiers in the same
name space with overlapping visibility should be typographically
unambiguous.
The presence of both the roundup(x,y) and round_up(x,y) macros in
the posix utils.h header incurs a violation of this rule.
These macros were added to keep in sync with the linux kernel variants.
However, there is a key distinction between how these two macros
work in the linux kernel; roundup(x,y) can handle any y alignment while
round_up(x,y) is intended to work only when y is a power-of-two.
Passing a non-power-of-two alignment to round_up(x,y) results in an
incorrect value being returned (silently).
Because all current uses of roundup(x,y) and round_up(x,y) in
nvgpu specify a y value that is a power-of-two and the underlying
posix macro implementations assume as much, it is best to remove
roundup(x,y) from nvgpu altogether to avoid any confusion.
So this change converts all uses of roundup(x,y) to round_up(x,y).
Jira NVGPU-3178
Change-Id: I0ee974d3e088fa704e251a38f6b7ada5a7600aec
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2271385
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed BUG_ON statements from gm20b_pbdma_acquire_val, as
condition could never be true. The only overflow that can
happen is in nvgpu_safe_mult_u64.
Compute exponent by shifting timeout (in units of 1024 ns)
until it fits into mantissa. This removes the need to
compute most significant bits, and allows using hw definitions
for mantissa and exponent max values.
Jira NVGPU-3694
Jira NVGPU-4673
Change-Id: Iaf4b5aaafe5b4e759d4e447f76f05f81e201a584
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2263650
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add unit tests for:
- gv11b_tsg_init_eng_method_buffers
- gv11b_tsg_deinit_eng_method_buffers
- gv11b_tsg_bind_channel_eng_method_buffers
- gv11b_tsg_unbind_channel_check_eng_faulted
Note: gv11b_tsg_enable was already tested as part of TSG common.
Added SWUTS documentation for above tests.
Modified gv11b_tsg_init_eng_method_buffers to inline computation
of method buffer size, as existing static function could never
return 0, making one branch not testable.
Added dummy IO register spaces for PFB, CE, PBUS and HSUB_COMMON,
so that g->ops.mm.init_mm_support can be called as part of
test_fifo_init_support. MM support is needed to test allocation
and mapping of DMA buffers.
Jira NVGPU-3788
Change-Id: I5356531b23c0456662187d16b35955bf0e528782
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2207384
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_kzalloc can fail in gv11b_init_eng_method_buffers.
Added checks on returned pointer.
Also changed g->ops.tsg.init_eng_method_buffers to return an int,
and check return value in callers.
Jira NVGPU-3788
Change-Id: Icb541665c40b89d512929cc9cf9f6a3e7a0033db
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2205851
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove branch F_CHANNEL_SETUP_BIND_HAS_GPFIFO_MEM from the unit test
for nvgpu_channel_setup_bind as gpfifo_mem belongs to KMD and are not
part of safe builds.
Remove assignment of stub_userd_setup_sw as USERD is compiled out for
safe build.
Jira NVGPU-3172
Change-Id: I4ba72043cb97d8804887c2bed30af9d01dca563e
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2142941
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
