The chid member of the channel_gk20a struct was being used as a unsigned
value. By being declared as an int, it was causing MISRA 10.3 violations
for implicit assignment of different types.
JIRA NVGPU-647
Change-Id: I7477fad6f0c837cf7ede1dba803158b1dda717af
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1918470
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA 10.3 rule disallows implicit assignments between different
essential types. This adds casts to address some of these violations
in fifo_gk20a.
This also removes unnecessary bar1 test in
gk20a_fifo_handle_sched_error() (rather than add messy casting).
JIRA NVGPU-647
Change-Id: Ic8700459e47a59dc03e0149f6efb060efa4d4e42
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1917635
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA 10.3 forbids assigning an object with a narrower essential type
or of a different essential type. This addresses the file
fifo_gk20a.c where constants were in violation.
JIRA NVGPU-647
Change-Id: I0ecf9b0ce40de76464efbde9e9c9b6aa69d80ec0
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1917630
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now acquire rulist_submit_mutex to submit runlist and also
to wait for submit completion
But locking is only needed to atomically configure the runlist submit
registers, hence move the locking to inside of
gk20a_fifo_runlist_hw_submit() where we program the registers
Also convert the mutex to spinlock at the same time
Note that similar locking is not required for
tu104_fifo_runlist_hw_submit() since the runlist submit registers
are per-runlist beginning Turing
Bug 200452543
Change-Id: I53d6179b80cb066466b64c6efa9393e55e381bfc
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1919058
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now submit new runlist and wait for submit to complete in
gk20a_fifo_update_runlist_locked()
It is possible that multiple runlists are being updated in parallel
by multiple threads since the lock taken by parent of
gk20a_fifo_update_runlist_locked() is per-runlist
Note that the concurrent threads would still construct their runlists
into per-runlist buffer
But we still have a race condition while submitting these runlists
to hardware.
With an application that creates and destroys multiple contexts in
parallel this race condition gets realized and we see h/w reporting
an error interrupt NV_PFIFO_INTR_SCHED_ERROR_CODE_BAD_TSG which means
a bad TSG was submitted
Fix this by adding a global lock for runlist submit and wait sequence
This ensures that concurrent threads do not try to submit runlists
to the hardware at the same time
Bug 200452543
Bug 2405416
Change-Id: I2660a2e5d9af1da400e7f865361722dc0914f96f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1851114
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for calls to nvgpu_mutex_init and
improves related error handling.
JIRA NVGPU-677
Change-Id: I609fa138520cc7ccfdd5aa0e7fd28c8ca0b3a21c
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1805598
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch corrects a handful of MISRA 10.1 violations involving
illegal arithmetic operations (e.g. bitwise OR) on boolean values:
* fix to status handling in regops validation code
* fix to debugger event handling in gr code
* fix to entries_left tracking in runlist construct code
* fix to verbose channel dumping and reset tracking in fifo code
JIRA NVGPU-650
Change-Id: I3c3d9123b5a0e08fc936d0e63d51de99fc310ade
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1810957
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix MISRA rule 10.1 violations involving gk20a_nonstall_ops
enums by replacing them with with corresponding #defines.
Because these values can be used in expressions that require
unsigned values (e.g. bitwise OR) we cannot use enums.
The g->ce2.isr_nonstall() function was previously returning an
int that was a combination of gk20a_nonstall_ops enum bits which
led to the violations.
JIRA NVGPU-650
Change-Id: I6210aacec8829b3c8d339c5fe3db2f3069c67406
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1796242
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the current code, gk20a.h includes io.h which gets directly included
in a lot of other files. io.h contains methods which uses a struct
gk20a as a parameter leading to a circular dependency between io.h
and gk20a.h. This can be mitigated by removing io.h from gk20a.h as
part of larger effort to moving gk20a.h to nvgpu/gk20a.h
JIRA NVGPU-597
Change-Id: I93e504fa9371b88152737b342a75580c65e8f712
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1787316
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-For Si platforms, gk20a_get_gr_idle_timeout returns
3000 ms i.e. 3 sec. Currently this time is used for
preempt polling and this conflicts with channel
timeout if polling times out. Use fifo_eng_timeout_us converted
to ms for preempt polling.
-In case of preempt timeout, do not issue recovery
for si platform. ctxsw timeout will trigger recovery
if needed. For non si platforms, issue preempt timeout rc
if preempt times out.
Bug 2113657
Bug 2064553
Bug 2038366
Bug 2028993
Bug 200426402
Change-Id: I8d9f58be9ac634e94defa92a20fb737bf256d841
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1762076
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Recovery can be called for various types of faults. Acquire
runlist_lock for all runlists so that current teardown is done
before proceeding to next one.
-For legacy chips teardown is done by triggering mmu fault so
make sure runlist_locks are acquired during teardown and also
during handling mmu fault.
-gk20a_fifo_handle_mmu_fault is renamed as
gk20a_fifo_handle_mmu_fault_locked
-gk20a_fifo_handle_mmu_fault called from gk20a_fifo_teardown_ch_tsg
is replaced with gk20a_fifo_handle_mmu_fault_locked
-gk20a_fifo_handle_mmu_fault acquires/release runlist_lock for all
runlists and calls gk20a_fifo_handle_mmu_fault_locked
Bug 2113657
Bug 2064553
Bug 2038366
Bug 2028993
Change-Id: I973d7ddb6924b50bae2d095152867e99c87e780a
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761197
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In order to avoid the circular dependencies,
rearrange the static inline functions from
gk20a.h file.
Moved gk20a_gr_flush_channel_tlb function to
gr_gk20a.c and removed the #include gr_gk20a.h
from gk20a.h
Added a helper function utils.h to
move all generic static inline functions which
have no reference to gpu related structures.
ptimer related functions are moved to
ptimer.h
Implementations for as and pmu are moved to
corresponding files.
JIRA NVGPU-624
Change-Id: I4e956326e773ba037bf3a1696cc4c462085dbbe5
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1781941
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit 0b02c8589d.
Originally change was reverted as it was making ap_compute test on
embedded-qnx-hv e3550-t194 fail. With fixes related to replacing tsg
preempt with runlist preempt during teardown, preempt timeout set to
100 ms (earlier this was set to 1000ms for t194 and 3000ms for legacy
chips) and not issuing preempt timeout recovery if preempt fails, helped
resolve the issue.
Bug 200426402
Change-Id: If9a68d028a155075444cc1bdf411057e3388d48e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1762563
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Add support for aborting runlist/s. Aborting runlist/s,
will abort all active tsgs and associated active channels
within these active tsgs
-Bare channels are no longer supported. Remove recovery
support for bare channels. In case there are bare
channels, recovery will trigger runlist abort
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: I6bec8a0004508cf65ea128bf641a26bf4c2f236d
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640567
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-is_preempt_pending hal does not need timeout_rc_type input param as
for volta, reset_eng_bitmask is saved if preempt times out. For
legacy chips, recovery triggers mmu fault and mmu fault handler
takes care of resetting engines.
-For volta, no special input param needed to differentiate between
preempt polling during normal scenario and preempt polling during
recovery. Recovery path uses preempt_ch_tsg hal to issue preempt.
This hal does not issue recovery if preempt times out.
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: Ie76a18ae0be880cfbeee615859a08179fb974fa8
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1709799
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add g->fifo_eng_timeout_us to define engine timeout in microseconds.
It is initialized with GRFIFO_TIMEOUT_CHECK_PERIOD_US. In RM server
case, it can be overriden with value defined in device tree.
Jira EVLR-2674
Change-Id: I69ac2ce779fe575566c8ba48e8cd2d0e6b2d93cf
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1728391
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-timeouts will be enabled only when timeouts_disabled_refcount
will reach 0
-timeouts_enabled debugfs will change from u32 type to file type
to avoid race enabling/disabling timeout from debugfs and ioctl
-unify setting timeouts_enabled from debugfs and ioctl
Bug 1982434
Change-Id: I54bab778f1ae533872146dfb8d80deafd2a685c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1588690
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code related to MC module is updated for handling
MISRA violations
Rule 10.1: Operands shalln't be an inappropriate
essential type.
Rule 10.3: Value of expression shalln't be assigned
to an object with a narrow essential type.
Rule 10.4: Both operands in an operator shall have
the same essential type.
Rule 14.4: Controlling if statement shall have
essentially Boolean type.
Rule 15.6: Enclose if() sequences with braces.
JIRA NVGPU-646
JIRA NVGPU-659
JIRA NVGPU-671
Change-Id: Ia7ada40068eab5c164b8bad99bf8103b37a2fbc9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1720926
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_IOCTL_CHANNEL_RESCHEDULE_RUNLIST ioctl to reschedule runlist,
and optionally check host and FECS status to preempt pending load of
context not belonging to the calling channel on GR engine during context
switch.
This should be called immediately after a submit to decrease worst case
submit to start latency for high interleave channel.
There is less than 0.002% chance that the ioctl blocks up to couple
miliseconds due to race condition of FECS status changing while being read.
For GV11B it will always preempt pending load of unwanted context since
there is no chance that ioctl blocks due to race condition.
Also fix bug with host reschedule for multiple runlists which needs to
write both runlist registers.
Bug 1987640
Bug 1924808
Change-Id: I0b7e2f91bd18b0b20928e5a3311b9426b1bf1848
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1549050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Release runlist_lock and then initiate recovery if preempt
timed out. Also do not issue preempt if ch, tsg or runlist
id is invalid. tsgid could be invalid for below call trace
gk20a_prepare_poweroff->gk20a_channel_suspend->
*_fifo_preempt_channel->*_fifo_preempt_tsg
Bug 2065990
Bug 2043838
Change-Id: Ia1e3c134f06743e1258254a4a6f7256831706185
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662656
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below rc_types to be passed to gk20a_fifo_recover
MMU_FAULT
PBDMA_FAULT
GR_FAULT
PREEMPT_TIMEOUT
CTXSW_TIMEOUT
RUNLIST_UPDATE_TIMEOUT
FORCE_RESET
SCHED_ERR
This is nice to have to know what triggered recovery.
Bug 2065990
Change-Id: I202268c5f237be2180b438e8ba027fce684967b6
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662619
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
