- The hardware is designed in such a way that
if GR engine is not out of reset, it still takes clock.
- This causes ELCG feature to not engage correctly.
- So for iGPU, SW should bring all supported GR
engines out of reset during gpu boot, if MIG feature
is not enabled.
- This will help low power feature like elcg to
engage correctly and improve dynamic power savings.
- For dGPU, all GRs are out of reset by default by dev init.
Bug 200778542
Change-Id: I5f3519f73b4aaf1804fd112f28fe980f58181cd8
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613718
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Address following issues uncovered during inspection:
1. Remove the doxygen comment from nvgpu_wait_for_deferred_interrupts
definition.
2. Use NVGPU_MC_INTR_STALLING instead of hardcoding the index.
3. Define doxygen groups NVGPU_MC_UNIT_ENUMS,
NVGPU_MC_INTR_TYPE_DEFINES, NVGPU_MC_INTR_UNIT_DEFINES and
NVGPU_MC_INTR_ENABLE_DEFINES.
4. Update the doxygen comments.
5. Fix the cleanup, typo in the description of the test
test_wait_for_deferred_interrupts.
JIRA NVGPU-4795
Change-Id: Ifc6756832aabf9dd42ee174eb1373495e6d38c86
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287627
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The atomic counter in interrupt handler can overflow and result in
calling of BUG() which will crash the process. The equivalent
functionality can be implemented with just setting an atomic variable at
start of handler and resetting at end of handler. The wait can be longer
in case there is constant interrupts coming but ultimately it will end.
Generally the wait path is not time critical so it should not be an
issue. Also, fix the unit tests for mc.
Change-Id: I9b8a236f72e057e89a969d2e98d4d3f9be81b379
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2247819
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_mc_log_pending_intrs is debugging related function hence compile
out that and related functionality under CONFIG_NVGPU_NON_FUSA.
nvgpu_mc_intr_enable is applicable for older chips hence compile out
under CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA.
Update BUS, CE, ECC, FIFO, MC, PRIV_RING, GR, LTC, FB, PMU units'
doxygen comments based on recent ECC and MC refactoring.
JIRA NVGPU-4439
Change-Id: I337318683d6311b9c2b5748f2fb07dff29a6584f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2252853
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
INT30-C requires that unsigned integer operations do not wrap.
INT31-C requires checking that data isn't misinterpreted after casting.
INT32-C requires that signed operations do not overflow.
Jira NVGPU-3882
Change-Id: I6b4c1769ec85919f8ec2aa183cba3b7c0ffa1e97
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166124
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific mc code from common/mc to hal/mc.
Replace gk20a_readl/writel with nvgpu_readl/writel
Replace 0xFFFFFFFFU with U32_MAX hash define
Change local variable names to fix checkpatch errors/warnings
Change BUG to WARN
Move defines to header files
Create new defines for hard coded delays
JIRA NVGPU-2041
Change-Id: I3594121a81da37ef58c47e87c45e96441e4cf8c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085268
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The type for the timeout parameter to the NVGPU_COND_WAIT and
NVGPU_COND_WAIT_INTERRUPTIBLE macros was too weak. This updates these
macros to require a u32 for the timeout.
Users of the macros are updated to be compliant as necessary.
This addresses MISRA 10.3 violations for implicit conversions of types
of different size or essential type.
JIRA NVGPU-1008
Change-Id: I12368dfa81b137c35bd056668c1867f03a73b7aa
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017503
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move implementation of MC HAL to common/mc. Also bump gk20a
implementation to gm20b.
gk20a_mc_boot_0 was used via a HAL, but we have only one possible
implementation. It also has to be anyway called directly to detect
which HALs to assign, so make it a true common function.
mc_gk20a_handle_intr_nonstall was also used only in os/linux/intr.c
so move it there.
JIRA NVGPU-954
Change-Id: I79aedc9158f90d578db0edc17b714617b52690ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813519
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
