On ga10b+ platforms, more VM space is needed to map various buffers
to bar2 vm. Engine method buffer is mapped for each pbdma and for
maximum supported TSGs this requires more than 32MB of space.
Also we need to consider fault buffer space and vab buffer
space requirement.
Bug 3958581
Change-Id: I9ee87119f762352ee12859b71c08a5f75b3554e0
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2872811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds nvenc support for TU104
- Fetch engine/dev info for nvenc
- Falcon NS boot (fw loading) support
- Engine context creation for nvenc
- Skip golden image for multimedia engines
- Avoid subctx for nvenc as it is a non-VEID engine
- Job submission/flow changes for nvenc
- Code refactoring to scale up the support for other multimedia
engines in future.
Bug 3763551
Change-Id: I03d4e731ebcef456bcc5ce157f3aa39883270dc0
Signed-off-by: Santosh BS <santoshb@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2859416
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
This change is to adapt to shift of ACR t234 safety code from
iGPU to dGPU.
Required changes consists of:
Adding support for new LSB, WPR and ACR descriptor structures
which are more aligned with what dGPU currently uses.
Change old riscv LSB header to version 1, as version 2 will
be used for new header to align with dGPU header nomenclature.
Jira NVGPU-9298
Change-Id: Id75f7d0a03dc65c1983822ead428b330a83481a1
Signed-off-by: mpoojary <mpoojary@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2811116
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Changes
1. Remove dGPU flag dependency on calling gsp sw init on tot.
2. Created Enable flag for gsp scheduler to enable them on ga10b
platforms.
3. Engine config flag is only enabled for dGPU enabled platforms, as gsp
is using engine functions it need to be enabled for all gsp sched
enabled builds.
4. Changes in gsp_sequence_init/de_init where on qnx we are seeing
issues.
NVGPU-9297
Change-Id: Ia4bce85ae8fd2794da1553e9ea418c76845a10ac
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2822537
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use CONFIG_KMD_SCHEDULING_WORKER_THREAD instead of
CONFIG_NVS_KMD_BACKEND to remove confusion about the CPU based
KMD scheduling worker thread.
The KMD based scheduling worker thread caters to both Manual Mode
CPU based scheduler as well as Automatic Round Robin CPU based
scheduler.
For the traditional submit path, add correct handling of the
CONFIG_NVS_PRESENT. CPU based worker thread should be part of
CONFIG_NVS_PRESENT. Eventually, when DCONFIG_KMD_SCHEDULING_WORKER_THREAD
is removed, the application must switch to GSP.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0886ef3b2e0124b6fe22c2bf0bf7d1fa98039d00
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2810217
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added infrastructure for enabling parsing Control-Fifo's
ring buffers(i.e. send/receive).
Initialization of these buffers are handled as part of
nvgpu_nvs_buffer_alloc() call itself.
A follow-up change shall implement the methods defined here
as part of the existing NVS worker thread.
The changes adhered to the design laid out in the header
nvsched/include/nvs/nvs-control-interface.h.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I2050e6fb681eba80e01cf547ada37a955e58315a
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2764518
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch introduces following relationships among various nvgpu
objects to support multiple address spaces with subcontexts.
IOCTLs setting the relationships are shown in the braces.
nvgpu_tsg 1<---->n nvgpu_tsg_subctx (TSG_BIND_CHANNEL_EX)
nvgpu_tsg 1<---->n nvgpu_gr_ctx_mappings (ALLOC_OBJ_CTX)
nvgpu_tsg_subctx 1<---->1 nvgpu_gr_subctx (ALLOC_OBJ_CTX)
nvgpu_tsg_subctx 1<---->n nvgpu_channel (TSG_BIND_CHANNEL_EX)
nvgpu_gr_ctx_mappings 1<---->n nvgpu_gr_subctx (ALLOC_OBJ_CTX)
nvgpu_gr_ctx_mappings 1<---->1 vm_gk20a (ALLOC_OBJ_CTX)
On unbinding the channel, objects are deleted according
to dependencies.
Without subcontexts, gr_ctx buffers mappings are maintained in the
struct nvgpu_gr_ctx. For subcontexts, they are maintained in the
struct nvgpu_gr_subctx.
Preemption buffer with index NVGPU_GR_CTX_PREEMPT_CTXSW and PM
buffer with index NVGPU_GR_CTX_PM_CTX are to be mapped in all
subcontexts when they are programmed from respective ioctls.
Global GR context buffers are to be programmed only for VEID0.
Based on the channel object class the state is patched in
the patch buffer in every ALLOC_OBJ_CTX call unlike
setting it for only first channel like before.
PM and preemptions buffers programming is protected under TSG
ctx_init_lock.
tsg->vm is now removed. VM reference for gr_ctx buffers mappings
is managed through gr_ctx or gr_subctx mappings object.
For vGPU, gr_subctx and mappings objects are created to reference
VMs for the gr_ctx lifetime.
The functions nvgpu_tsg_subctx_alloc_gr_subctx and nvgpu_tsg_-
subctx_setup_subctx_header sets up the subcontext struct header
for native driver.
The function nvgpu_tsg_subctx_alloc_gr_subctx is called from
vgpu to manage the gr ctx mapping references.
free_subctx is now done when unbinding channel considering
references to the subcontext by other channels. It will unmap
the buffers in native driver case. It will just release the
VM reference in vgpu case.
Note that TEGRA_VGPU_CMD_FREE_CTX_HEADER ioctl is not called
by vgpu any longer as it would be taken care by native driver.
Bug 3677982
Change-Id: Ia439b251ff452a49f8514498832e24d04db86d2f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2718760
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
In order to maintain separate mappings of GR TSG and global context
buffers for different subcontexts, we need to separate the memory
struct and the mapping struct for the buffers. This patch moves
the mappings of all GR ctx buffers to new structure
nvgpu_gr_ctx_mappings.
This will be instantiated per subcontext in the upcoming patches.
Summary of changes:
1. Various context buffers were allocated and mapped separately.
All TSG context buffers are now stored in gr_ctx->mem[] array
since allocation and mapping is unified for them.
2. Mapping/unmapping and querying the GPU VA of the context
buffers is now handled in ctx_mappings unit. Structure
nvgpu_gr_ctx_mappings in nvgpu_gr_ctx holds the maps.
On ALLOC_OBJ_CTX this struct is instantiated and deleted
on free_gr_ctx.
3. Introduce mapping flags for TSG and global context buffers.
This is to map different buffers with different caching
attribute. Map all buffers as cacheable except
PRIV_ACCESS_MAP, RTV_CIRCULAR_BUFFER, FECS_TRACE, GR CTX
and PATCH ctx buffers. Map all buffers as privileged.
4. Wherever VM or GPU VA is passed in the obj_ctx allocation
functions, they are now replaced by nvgpu_gr_ctx_mappings.
5. free_gr_ctx API need not accept the VM as mappings struct
will hold the VM. mappings struct will be kept in gr_ctx.
6. Move preemption buffers allocation logic out of
nvgpu_gr_obj_ctx_set_graphics_preemption_mode.
7. set_preemption_mode and gr_gk20a_update_hwpm_ctxsw_mode
functions need update to ensure buffers are allocated
and mapped.
8. Keep the unit tests and documentation updated.
With these changes there is clear seggregation of allocation and
mapping of GR context buffers. This will simplify further change
to add multiple address spaces support. With multiple address
spaces in a TSG, subcontexts created after first subcontext
just need to map the buffers.
Bug 3677982
Change-Id: I3cd5f1311dd85aad1cf547da8fa45293fb7a7cb3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2712222
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Volta+ chips supports PES floorsweeping and Ampere+(iGPU) chips supports
ROP floorsweeping. At present, the driver isn't aware of PES, ROP
floorsweeping, make the driver PES, ROP floorsweeping aware by introducing the
following fields in nvgpu_gr_config:
- gpc_(rop/pes)_mask: Contains the bit mask of non FSed ROP/PES units per GPC.
- gpc_(rop/pes)_logical_id_map: Translates per GPC ROP/PES physical id to
logical id.
Introduce the following HAL functions to read PES/ROP FS data:
- gops_fuse.fuse_status_opt_(pes/rop)_gpc: This fuction gets the FS
config from the fuse.
- gops_top.get_max_(pes/rop)_per_gpc: Gets the maximum number of PES/ROP
units that can be present in a GPC.
In addition, introduce the enabled flag NVGPU_SUPPORT_PES_FS to identify chips
which support PES floorsweeping, piggyback on NVGPU_SUPPORT_ROP_IN_GPC
enabled flag to identify ROP floorsweeping.
Bug 3524791
Change-Id: I065bab6c02618fe38892c8c890b069c340b85301
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2679570
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The high level API for the timer unit is the same across all OSs, so
get rid of the slight code duplication by moving the timer init
functions under a new file in common code:
- nvgpu_timeout_init_cpu_timer
- nvgpu_timeout_init_cpu_timer_sw
- nvgpu_timeout_init_retry
Much of the timer logic is also duplicated, but it is mixed between OS
specific current time retrieval. With some refactoring and addition of
an OS independent time keeping layer, that logic could also be made
shared.
Change-Id: I75d02ceb0d32022b0ba7f3bcd9fdb13d47039dbc
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2669510
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below CE interrupts do not have any users(usecases) on safety build;
disable them only on safety build.
1. BLOCKPIPE stall intr: Not used by GFX(VKSC) and CUDA on safety.
2. NONBLOCK_PIPE nonstall intr: Non-stall intrs are not supported
on safety build. Also, this one is not used by GFX(VKSC)
and CUDA.
3. STALLING_DEBUG intr: Added in Orin tree. It is only needed for
debugging. Disable on safety build as there is no current
usage in driver.
4. POISON_ERROR intr: Poison is a fault containment and not
supported on GA10b.
5. INVALID_CONFIG intr: Floor sweeping not supported on functional
safety SKU.
Bug 3548082
Change-Id: I8d97ccb38f138b2c04a780e1c255a64d28723405
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671927
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace ga10b_ptimer_isr with gk20a_ptimer_isr.
Remove GPU_PRI_ACCESS_VIOLATION reporting from gp10b hal as only
ga10b should be reporting these errors.
GPU_PRI_TIMEOUT_ERROR was only reported from ptimer ISR. However,
it is to be reported when error code is 0xbadf10xx that can be
seen through priv_ring ISR as well. Hence report this error
from ga10b_priv_ring_decode_error_code called from both bus
and priv_ring isr.
For other error cases GPU_PRI_ACCESS_VIOLATION is reported.
Other updates for priv_ring error handling are given below:
1. Add extra info decode functions for error codes:
- 0xbad001xx, 0xbad002xx, 0xbad0daxx - decode_host_pri_error
- 0xbadf13xx - decode_fecs_floorsweep_error
- 0xbadf24xx, 0xbadf25xx, 0xbadf26xx - decode_gcgpc_error &
decode_pri_local_decode_error
- 0xbadf20xx, 0xbadf22xx - decode_fecs_pri_orphan_error
- 0xbadf52xx - decode_pri_indirect_access_violation
- 0xbadf60xx - decode_pri_lock_sec_sensor_violation
2. Add more info prints to decode_pri_falcom_mem_violation.
3. Add entry for extra info corresponding to 0x41 to
pri_client_error_extra_4x.
4. Separate extra info decode function for error 0xbadf50xx.
JIRA NVGPU-7986
Change-Id: I519a66e8a7a158de23ced5a092a2ebfd62c305be
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671337
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
hal/cbc/cbc_tu104.c
hal/ltc/ltc_tu104.c
The patch moves the above files out of CONFIG_NVGPU_DGPU, since the
below symbols are also used by iGPU (ga10b for example).
tu104_cbc_ctrl
tu104_ltc_pri_is_lts_tstg_addr
tu104_set_l2_sector_promotion
Jira GVSCI-9976
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: Ic0e749608cf4426f0fb1210b21a6d4a4c6a6068d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2663781
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- implemented device info cmd to send device info to the gsp for
runlist submission. Currently GSP scheduler support only GR
engine '0' instance.
- implemented runlist submit cmd. GSP firmware will submit the
corresponding runlist by writing into submit registers. This
command is direct replacement of hw_submit ga10b hal for GR engine.
NVGPU-6790
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I5dc573a6ad698fe20b49a3466a8e50b94cae74df
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2608923
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated gsp unit into three unit:
- GSP unit which holds the core functionality of GSP RISCV core,
bootstrap, interrupt, etc.
- GSP Scheduler to hold the cmd/msg management, IPC, etc.
- GSP Test to hold stress test ucode specific support.
NVGPU-7492
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I12340dc776d610502f28c8574843afc7481c0871
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660619
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make ga10b_init_nvlink_soc_credits OS agnostic by replacing OS
specific functions with corresponding nvgpu wrappers. This function is now
assigned to gops.mssnvlink.init_soc_credits HAL.
Introduce nvgpu wrapper, nvgpu_io_map/unmap to map/unmap specified
physical address range.
Jira NVGPU-6641
Change-Id: I337bc75b8ec36552fe471bf5e42f62c19f67ed4a
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618237
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When GPU need to programmed with PA(physical address),
given IPA need to be converted to PA by querying Hypervisor.
As this is an IPC between OSes, the call will reduce the
performance badly. So this is adding a IPA-PA cache to improve
the performance. This will be more helpful in passthr config.
Bug 3277194
Change-Id: I6a3230d858977313a0ed0f33068055a3b516330a
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2571814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added below IVC commands to support VAB on HV.
* TEGRA_VGPU_CMD_FB_VAB_RESERVE - Enable & Configure VAB tracking
* TEGRA_VGPU_CMD_FB_VAB_FLUSH_STATE - Dump VAB to user buffer
* TEGRA_VGPU_CMD_FB_VAB_RELEASE - Disable VAB tracking
Also set HAL and enable VAB for ga10b vgpu.
Jira GVSCI-4619
Change-Id: Id7564611c24740ab8613e4baa420ee58fb52759a
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add REMAP ioctl and accompanying support to the linux nvgpu driver.
REMAP support provides per-page control over sparse VM areas using the
concept of a virtual memory pool.
The REMAP ioctl accepts a list of operations (each a map or unmap) that
modify the VM area pages tracked by the virtual mmemory pool.
Inclusion of REMAP support in the nvgpu build is controlled by the new
CONFIG_NVGPU_REMAP flag. This flag is enabled by default for linux builds.
A new NVGPU_GPU_FLAGS_SUPPORT_REMAP characteristics flag is added for use
in detecting when REMAP support is available.
When a VM allocation tagged with NVGPU_VM_AREA_ALLOC_SPARSE is made the
base virtual memory pool resources are allocated. Per-page resources are
later allocated when the NVGPU_AS_IOCTL_REMAP ioctl is issued. All REMAP
resources are released when the corresponding VM area is freed.
Jira NVGPU-6804
Change-Id: I1f2cdc0c06c1698a62640c1c6fbcb2f9db24a0bc
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542178
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
