Fix MISRA violations for Rule 10.6 and 10.8 in gr.init unit
Assigning composite expression of width 32 to a target of width 64.
Cast from 32 bit width to a wider 64 bit type.
Jira NVGPU-3390
Jira NVGPU-3391
Change-Id: Id06fa9c90ae6cea1a7251b7834aca3f2c2f76e53
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2116154
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix CERT-C error for translating size from "unsigned long" to
"unsigned int".
Error: CERT INT31-C:
nvgpu/drivers/gpu/nvgpu/common/gr/obj_ctx.c:300:
cert_violation: Casting "size" from "unsigned long" to "unsigned int"
without checking its value may result in lost or misinterpreted data.
JIRA NVGPU-3409
Change-Id: I304fe39049d4f15361b23970ca2bcaecd2050ca3
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2114536
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below MISRA 17.7 violation is reported in common.gr.fs_state unit
nvgpu/drivers/gpu/nvgpu/common/gr/fs_state.c:121:
misra_c_2012_rule_17_7: The return value of a non-void function
"*g->ops.gr.init.rop_mapping" is unused
This hal need not return any error hence convert return type to void
map_tiles are always allocated before calling this hal hence no need
to check if they are allocated in this hal
Jira NVGPU-3407
Change-Id: Ic78946fcc7b4780208c416c444d33aea2db20bfc
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2114361
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below 5.7 violations are reported in common.gr.config unit :
nvgpu/drivers/gpu/nvgpu/common/gr/gr_config.c:628:
identifier_reuse: Identifier "sm_info" is already used to represent a type.
Fix them by renaming struct sm_info to struct nvgpu_sm_info
Jira NVGPU-3225
Change-Id: I26f70a4ed2a5a845e0dc9daeb8fb5474e35d42fb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110986
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix for MISRA error Rule 14.2
Using a comma operator in the first clause of the for loop.
The first clause should either be empty or assign a value to the loop counter.
Jira NVGPU-3227
Change-Id: Ia46d8c9a8fb99f9e49be2eb56cabef6947c5b44b
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2111678
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix MISRA error for Rule 14.3
The switch governing value "offset" cannot reach the default case.
Execution cannot reach this statement "default:".
Change switch statement with if else checking
Jira NVGPU-3227
Change-Id: Ib1ccfe2d3bef94ffaf3e0f963bc21260844d0c91
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110759
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix for MISRA Rule 14.2.
Using a comma operator in the first clause of the for loop.
The first clause should either be empty or assign a value to the loop counter.
Don't update the loop counter within the loop body.
Jira NVGPU-3227
Change-Id: I6bee94c0ce7198d6ff4e465e2e0d982d3d358161
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110758
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create a new unit common.fbp which initializes fbp support and provides
APIs to retrieve fbp data.
Create private header with below data
struct nvgpu_fbp {
u32 num_fbps;
u32 max_fbps_count;
u32 fbp_en_mask;
u32 *fbp_rop_l2_en_mask;
};
Expose below public APIs to initialize/remove fbp support:
nvgpu_fbp_init_support()
nvgpu_fbp_remove_support()
vgpu_fbp_init_support() for vGPU
Expose below APIs to retrieve fbp data
nvgpu_fbp_get_num_fbps()
nvgpu_fbp_get_max_fbps_count()
nvgpu_fbp_get_fbp_en_mask()
nvgpu_fbp_get_rop_l2_en_mask()
Use above APIs to retrieve fbp data in all the code.
Remove corresponding fields from struct nvgpu_gr since they are no
longer referred from that structure
Jira NVGPU-3124
Change-Id: I027caf4874b1f6154219f01902020dec4d7b0cb1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108617
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.get_preemption_mode_flags() hal is used to fetch information
on supported preemption modes and default preemption mode
Temporary struct nvgpu_preemption_modes_rec is used for this purpose
and is defined in gk20a/gr_gk20a.h right now.
Split above hal into two separate hals and move them to hal.gr.init unit
g->ops.gr.init.get_supported__preemption_modes()
g->ops.gr.init.get_default_preemption_modes()
These hals now return respective flags in pointers passed in function
parameter list, so there is no need to use temporary structure anymore
Hence delete struct nvgpu_preemption_modes_rec
Implement gm20b/gp10b chip specific hals in hal.gr.init unit.
Delete g->ops.gr.get_preemption_mode_flags() hal
Jira NVGPU-3126
Change-Id: I84f507fcd8d122bb7f0ecf697e8b4f16c9339ce1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102455
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. This patch contains fixes for all 17.7 violations
in the following units:
- nvgpu.hal.bus
- nvgpu.hal.fb
- nvgpu.hal.fifo
- nvgpu.hal.gr
JIRA NVGPU-3153
Change-Id: Iac9477ee7c36a0f2f8840e178dc5418e600f9c84
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gfxp_wfi_timeout_count/unit fields were stored in gr_gk20a.ctx_vars
struct so that any user could configure them through sysfs nodes
But the sysfs nodes are legacy and not being actively used by anyone.
Hence delete the sysfs nodes to configure these fields.
Since the gfxp timeout unit/count can now be statically programmed,
make following changes
- remove g->ops.gr.init_gfxp_wfi_timeout_count() hal
- remove g->ops.gr.get_max_gfxp_wfi_timeout_count() hal
- update g->ops.gr.init.preemption_state() hals to configure the values
using macros instead of caller passing the values
- update g->ops.gr.init.gfxp_wfi_timeout() hals to configure the values
using macros instead of caller passing the values
Finally, we don't need to store gfxp_wfi_timeout_count/unit fields
anymore, hence delete them from gr_gk20a.ctx_vars
Jira NVGPU-3112
Change-Id: Idbe5ab3053228dd177aca253545aac36d38ca8ad
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.detect_sm_arch() in hal.gr.init unit to get
SM arch information. Remove g->ops.gr.detect_sm_arch().
Move corresponding functions to hal.gr.init unit
Remove unused function declaration for gr_gv11b_init_sw_veid_bundle()
Jira NVGPU-2961
Change-Id: Idfd5ce19c06978dc31cbcec2cd01cb2912eb3cf9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2097534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.get_patch_slots() in hal.gr.init unit to get
patch slot count. Remove g->ops.gr.get_patch_slots().
Move corresponding functions to hal.gr.init unit
This hal does not need to be set for vGPU since it is not called in
that case
Jira NVGPU-2961
Change-Id: Ide488ae93af53a755da95faa268563070bd24bea
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2097533
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL API g->ops.gr.init.get_max_subctx_count() in hal.gr.init
unit that returns max subctx count defined by h/w
Use this new hal in all GR code instead of using value stored in struct
fifo_gk20a
Jira NVGPU-2961
Change-Id: I5db1d827c3b7581a5ba7aca4314ba2f5a590d80c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2097532
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move get_nonpes_aware_tpc hal to hal.gr.init . This hal is
implemented for gv11b.
Update sm_id_numbering hal to pass the gr_config struct pointer
as parameter to avoid dereferencing from gr inside hal.
JIRA NVGPU-2951
Change-Id: I1e06b634cc36741e116e41e581a18c7f5b373945
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093835
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor the ECC code present under gp10b/, gv11b/, and tu104/. To
do this a few things were required:
Firstly, move the ecc related C and H files under the aforementioned
directories over to their new home under hal/gr/ecc/. Also copy over
the ECC HAL code present in gp10b/gp10b.c - not sure why this was
there but it, too, needed to be refactored. Also handle all the
updated header paths and Makefiles to take these movements into
account.
Secondly add a new HAL in GR (gr.ecc) to handle ECC HAL ops. There's
only two: detect and init. init() was copied over from gr and detect
was added so that the common ECC code can call it in a chip agnostic
way. This is required so that the ECC detect can be moved out of the
gp10b init characteristics function.
Lastly update the ECC init flow in the common ecc module to call
detect() right before init().
JIRA NVGPU-3074
Change-Id: Iba1464a904f9a91a45f30902beadf6f912607e40
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090977
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove locally defined timeout call in gr and use common timeout
call.
Replace nvgpu_gr_get_idle_timeout with nvgpu_get_poll_timeout function
Replace following defines to
NVGPU_GR_IDLE_CHECK_DEFAULT_US ---> POLL_DELAY_MIN_US
NVGPU_GR_IDLE_CHECK_MAX_US ---> POLL_DELAY_MIN_US
JIRA NVGPU-1885
Change-Id: I4514a9763fe0687680d50704bc9f22677a1a3df9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085031
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.gfxp_wfi_timeout() in hal.gr.init unit
to commit gfxp timeout
Define gv11b chip specific operation
Use new hal in gr_gv11b_update_ctxsw_preemption_mode() instead of
directly committing using register accessors
Jira NVGPU-2961
Change-Id: I7694e3128920d9a2856faecf2e3d10a11f0f986e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084750
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.commit_cbes_reserve() in hal.gr.init unit
to commit cbes reserve
Define gp10b and gv11b chip specific operations
Use new hals in gr_gp10b_update_ctxsw_preemption_mode() and
gr_gv11b_update_ctxsw_preemption_mode() instead of directly committing
using register accessors
Jira NVGPU-2961
Change-Id: Iea2032ea61264c286b1fab46435ff5a84c90d3da
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.commit_ctxsw_spill() in hal.gr.init unit
to commit spill ctxsw buffer
Define gp10b and gv11b operations
Use new hals in gr_gp10b_update_ctxsw_preemption_mode() and
gr_gv11b_update_ctxsw_preemption_mode() instead of directly committing
using register accessors
Jira NVGPU-2961
Change-Id: Iced02d304f12bcb4e78ea31a7728baa04081e325
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084748
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below hals are used to get preemption buffer sizes
g->ops.gr.get_ctx_spill_size()
g->ops.gr.get_ctx_pagepool_size()
g->ops.gr.get_ctx_betacb_size()
g->ops.gr.get_ctx_attrib_cb_size()
Move them to hal.gr.init unit
Copy over corresponding gp10b/gv11b definitions
Remove pagepool and attrib_cb size hals from gv11b since gv11b can
re-use gp10b hals
Add spill size and betacb size hals for gv100 and tu104 too since
register values are different on those chips
Remove g->ops.gr.init_gfxp_rtv_cb() hal and replace it by
g->ops.gr.init.get_gfxp_rtv_cb_size() which returns the size of RTV
cb size
Jira NVGPU-2961
Change-Id: I3f2f973c120dbfd22067366f87d06b5c9162defb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084747
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.load_sw_bundle_init() in hal.gr.init unit
and move corresponding code from gk20a_init_sw_bundle()
Add this hal to all the supported chips
Move g->ops.gr.init_sw_veid_bundle() hal to hal.gr.init unit
Move definition of hal to gv11b chip file of hal.gr.init
Add this hal for gv11b/gv100/tu104
Move g->ops.gr.init_sw_bundle64() hal to hal.gr.init unit
Move definition of hal to tu104 chip file of hal.gr.init
Add this hal for tu104
Jira NVGPU-2961
Change-Id: I560c2ba95fb820275d5ccb46939007c58481ccbb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_cb_manager() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_cb_manager()
Move hal definitions to gm20b/gp10b hal files appropriately
Add nvgpu_gr_config pointer to the parameter list of this hal so that
it does not have to dereference struct gr_gk20a in hal.gr.init unit
Jira NVGPU-2961
Change-Id: Iaff476648fa6abdf5a79be500f65a40eb90c0b08
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_attrib_cb() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_attrib_cb()
Remove register header accessor from gr_gk20a_commit_global_ctx_buffers()
and move it to hal functions
Move hal definitions to gm20b/gp10b/gv11b hal files appropriately
Jira NVGPU-2961
Change-Id: I5437a190a9e027997f63ef0e741d99e6bbebab3f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077218
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_pagepool() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_pagepool()
Also move g->ops.gr.pagepool_default_size() hal to
g->ops.gr.init.pagepool_default_size()
Add global_ctx boolean flag as parameer to
g->ops.gr.init.commit_global_pagepool() to distinguish between
committing global pagepool v/s ctxsw pagepool buffers
Remove register header accessors from gr_gk20a_commit_global_ctx_buffers()
and move them to hal functions
Move hal definitions to gm20b/gp10b hal files appropriately
Remove g->ops.gr.pagepool_default_size() hal for gv11b since gv11b can
re-use gp10b hal
Jira NVGPU-2961
Change-Id: Id532defe05edf2e5d291fec9ec1aeb5b8e33c544
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077217
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move init_gpc_mmu hal to hal.gr.init and update the
g->ops.gr.init_gpc_mmu call as g->ops.gr.init.gpc_mmu
Add new hal, pes_vsc_stream which will enable the master bit to
take floorsweep into consideration.
Modify the disable_rd_coalesce hal as su_coalesce hal and
set_rd_coalesce call as lg_coalesce hal and move to hal.gr.init
su_coalesce hal function touches only the surface read coalesce bit.
lg_coalesce hal function touches only the lg read coalesce bit.
JIRA NVGPU-2951
Change-Id: Ifc5e36f7e75d3b74142a83a3c78a9cb2b81752eb
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079532
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_bundle_cb() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_bundle_cb()
Remove register header accessor from gr_gk20a_commit_global_ctx_buffers()
and move it to hal functions
Move hal definitions to gm20b/gp10b hal files appropriately
Jira NVGPU-2961
Change-Id: I6358dce963857402aa1d4d5606bf75398b9be83d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077216
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.get_global_ctx_cb_buffer_size() and
g->ops.gr.get_global_ctx_pagepool_buffer_size() hals to hal.gr.init
unit
Move corresponding hal definitions to hal.gr.init unit
Jira NVGPU-2961
Change-Id: Ifff3e2073f6d9bca5b37244f7e107bad885e7ca7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077215
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following ltc related data to struct nvgpu_ltc
and has a reference to it from struct gk20a:
struct nvgpu_spinlock ltc_enabled_lock;
u32 max_ltc_count;
u32 ltc_count;
u32 slices_per_ltc;
u32 cacheline_size;
Added function remove_support for ltc and it is called
during nvgpu remove sequence.
Added following helper functions in ltc.h:
u32 nvgpu_ltc_get_ltc_count(struct gk20a *g);
u32 nvgpu_ltc_get_slices_per_ltc(struct gk20a *g);
u32 nvgpu_ltc_get_cacheline_size(struct gk20a *g);
Removed redudnant ltc.init_fs_state call from vgpu init
sequence since it is getting called from nvgpu_init_ltc_support.
NVGPU-2044
Change-Id: I3c256dc3866f894c38715aa2609e85bd2e5cfe5a
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073417
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below variables from struct gr_gk20a
u32 bundle_cb_default_size;
u32 min_gpm_fifo_depth;
u32 bundle_cb_token_limit;
u32 attrib_cb_default_size;
u32 alpha_cb_default_size;
u32 attrib_cb_gfxp_default_size;
u32 attrib_cb_gfxp_size;
u32 attrib_cb_size;
u32 alpha_cb_size;
Instead add below hals in hal.gr.init unit to get all of above sizes
u32 (*get_bundle_cb_default_size)(struct gk20a *g);
u32 (*get_min_gpm_fifo_depth)(struct gk20a *g);
u32 (*get_bundle_cb_token_limit)(struct gk20a *g);
u32 (*get_attrib_cb_default_size)(struct gk20a *g);
u32 (*get_alpha_cb_default_size)(struct gk20a *g);
u32 (*get_attrib_cb_gfxp_default_size)(struct gk20a *g);
u32 (*get_attrib_cb_gfxp_size)(struct gk20a *g);
u32 (*get_attrib_cb_size)(struct gk20a *g, u32 tpc_count);
u32 (*get_alpha_cb_size)(struct gk20a *g, u32 tpc_count);
u32 (*get_global_attr_cb_size)(struct gk20a *g, u32 max_tpc);
Define these hals for all gm20b/gp10b/gv11b/gv100/tu104 chips
Also add hal.gr.init support for gv100 chip
Remove all accesses to variables from struct gr_gk20a and start using
newly defined hals
Remove below hals to initialize sizes since they are no more required
g->ops.gr.bundle_cb_defaults(g);
g->ops.gr.cb_size_default(g);
g->ops.gr.calc_global_ctx_buffer_size(g);
Also remove definitions of above hals from all the chip files
Jira NVGPU-2961
Change-Id: I130b578ababf22328d68fe19df581e46aebeccc9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077214
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal fifo_access to control the gr_gpfifo_ctl_r register to
enable or disable the access bit and semaphore access bit.
g->ops.gr.init.fifo_access function call with true or false
parameter to enable or disable the fifo_access.
JIRA NVGPU-2951
Change-Id: I67ad7ce9f176d7ce347e8acb425f7a4bb9e088ca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077705
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
