The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update pmu ucode version for next pmu to 29323513.
This version is taken from P4 CL#29323216.
Changes:
- Enabled ACR task support
- Disabled few features/code for commands to work
- ELPG fifo preemption hals fixed
- Halt functions in ELPG save and restore functions
are commented as bloaded flag is not getting set. This
is not significant as this change will not have any impact
in elpg functionality.
P4 ToT CL on which above change was made: P4 CL#29322732
P4 CL link: https://p4sw-swarm.nvidia.com/changes/29323216
Bug 200666202
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I34581cc15889463fa363cffb369485171c603247
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2447234
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add supper surface gpu_va details to super surface header member
as needed by PMU ucode to process.
This is required for iGPU PMU ucode on nvgpu-next to process command
line args and ACK back with INIT message, without this PMU ucode ends
up in hang due to DMA wait.
Update super-surface details to cmd line args for PMU ucode to
know the starting address of super-surface in SYSMEM.
JIRA NVGPU-5186
Change-Id: I56d7d3e28527e46707663c97bc8e2a58000c7f5a
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376364
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- Send down BOARDOBJGRP classId to the PMU. Assign each
BOARDOBJ the classId of its parent group which is set
to zero in current implementation. Changed in NVGPU to send
board obj grp classid to PMU.
- Disable IPC VMIN support as pmu-tu10a profile doesn't support.
- Change in clk vf point enumeration types.
- Change in pstate type values.
- Updated ctrl_perf_vfe_var_single_sensed_fuse_ver_vfield_info
NVGPU-PMU interface struct with b_ver_expected_is_mask to send
whether the expected version is single value or should be
interpreted as a bit mask with bits corresponding to
expected versions set.
NVBUG-200593676
NVGPU-5066
Change-Id: I17b172d88f8b74fbf78044caf7f64cd8811f9fb7
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2308533
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from pmuif which only
clk can access.
All public items are moved into include/clk.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4491
Change-Id: Iccb0571e05ecb3cb13363390bed8c7214409b543
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292318
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A call to exit the PMU state machine/kthread must
be prioritized over any other state change.
It was possible to set the state as PMU_STATE_EXIT,
signal the kthread and overwrite the state before
the kthread has had the chance to exit its loop.
This may lead to a "lost" signal, resulting in
indefinite wait during the destroy sequence.
Faulting sequence:
1. pmu_state = PMU_STATE_EXIT in nvgpu_pmu_destroy()
2. cond_signal()
3. pmu_state = PMU_STATE_LOADING_PG_BUF
4. PMU kthread wakes up
5. PMU kthread processes PMU_STATE_LOADING_PG_BUF
6. PMU kthread sleeps
7. nvgpu_pmu_destroy() waits indefinitely
This patch adds a sticky flag to indicate PMU_STATE_EXIT,
irrespective of any subsequent changes to pmu_state.
The PMU PG init kthread may wait on a call to
NVGPU_COND_WAIT_INTERRUPTIBLE, which requires a
corresponding call to nvgpu_cond_signal_interruptible()
as the core kernel code requires this task mask to
wake-up an interruptible task.
Bug 2658750
Bug 200532122
Change-Id: I61beae80673486f83bf60c703a8af88b066a1c36
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2181926
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-dGPU PMU init message interface updated to support RPC style init
PMU init message changed to RPC event & made needed changes to
handle RPC event during init stage
-Added new RPC header PMU_RM_RPC_HEADER, header from PMU to NvGPU
which will be part of RPC events received from PMU.
-GID info moved to super-surface for dGPU, so removed GID info
fetch from DMEM for dGPU & kept support for iGPU only.
-PMU_UNIT_INIT value for dGPU init changed
JIRA NVGPU-3723
Change-Id: I016bd1150494007a56905db23b4769e693ecd5da
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2153141
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Right now in PMU we have disabled usage of VFE cached values
as we have seen failures in 5.1.3.0 release. This patch
will send vfe_var dependent masks to PMU which will be
used for initial invalidation of dependent VFE_VAR cached
values. As a result PMU will compute the dependent VARs and
cache them.
NVGPU-3645
Change-Id: I814ae819d77270ac45b97cf2a32726992e6f4af3
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137423
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocate space at runtime for PMU RTOS fw struct, this helps
to reduce the size of nvgpu_pmu struct when LS_PMU support
is not required.
Allocation happens at pmu early init stage & will deinit at
remove_support stage.
JIRA NVGPU-1972
Change-Id: I1452b085f8d3a76e12186f788c2d999a8b4b202d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2111072
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Identifier names used were already used to represent types. Fix those.
for e.g. pwr_channel in nv_pmu_pmgr_pwr_channel_union.
pmu_init_msg identifier name changed to init_msg as that is used to
represent a type.
JIRA NVGPU-3272
Change-Id: I887b66f08df1e00803d872873f6447f563675d44
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108548
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following for boardobjgrpmask unit.
1. Remove unused functions and its pointers.
2. Append public functions with nvgpu.
3. Remove unnecessary inclusion of header files.
4. Make local functions as static.
5. Rename function names to increase readibility.
6. Remove boardobj* from static functions.
Jira NVGPU-1977
Change-Id: Ie6d3bd8f55784d29ae4ba720fb3998487ad2b942
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2107167
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Currently PG task is created for both iGPU & dGPU as part PMU init
sequence path, but task is not required for dGPU or can be skipped
if ELPG is not supported on iGPU, made changes to create PG task only
if supported else skip it, and made some functions to private as these
are required by PG UNIT only.
-PG instance is allocated & set to default properties as needed if
support is enabled else skip it.
-Made changes in dependent files as required to reflect above changes
JIRA NVGPU-1972
Change-Id: I4efb7f1814a9ad48770acea2173e66f0a4c8a9c1
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created PMU fw unit to hold PMU RTOS f/w specific ops, images,
flags & command arguments needed for PMU RTOS ucode support.
Moved PMU fw ops from gk20a.gpu_ops to pmu.fw.ops as these ops
are needed to support different version of PMU fw version for
different chips
JIRA NVGPU-1955
Change-Id: I51385d8c20524431f07cba3378676464663deb20
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090769
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
