The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added init function for common.ptimer unit and called
this init function during nvgpu early init.
int nvgpu_ptimer_init(struct gk20a *g);
Added following helper function for programming
prod values for slcg timer unit:
void nvgpu_cg_slcg_timer_load_enable(struct gk20a *g);
Invoked prod programming for slcg timer unit from
nvgpu_ptimer_init.
Jira NVGPU-6026
Change-Id: I29e32380a4d05ec8276d7ebe59bc2733917f8184
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2524037
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate flag gpu_dbg_gr to enable common.gr specific debugging.
Add this flag to all the existing debug logs that use gpu_dbg_fn or
gpu_dbg_info for debugging. Also add many other debugging logs that
might be helpful in debugging.
Removing debug log in gv11b_gr_init_get_nonpes_aware_tpc() as it dumps
too much data that does not seem useful.
Batch all interrupt enable functions in gr_init_setup_hw() together for
readability.
Jira NVGPU-5648
Change-Id: I0b857650122cdb1f974b452d28c26e7f142baf61
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2411740
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Hardware HWPM system should be reset when first reservation is made
either for HWPM or PMA_STREAM resource. Support this with below changes
- Add hwpm_refcount counter to track HWPM and PMA_STREAM resource
reservation count
- Increment counter on every HWPM/PMA resource reservation
- Decrement counter on every resource reservation release
- Reset HWPM system in MC and disable perf unit SLCG on first refcount
increment
- Reset HWPM system in MC and re-enable perf unit SLCG after last
refcount decrement
- Add nvgpu_cg_slcg_perf_load_enable() to manage perf unit SLCG
Bug 2510974
Jira NVGPU-5360
Change-Id: I20d2927947c3e4d8073cd3131b7733791e9c9346
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2399594
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
pwr_csb slcg, blcg gating registers are covered by pmu slcg/blcg hence
its load functions are not used. Hence, delete the generated data and
functions. slcg, blcg ctxsw_firmware and pg_gr gating reglists are
null hence delete the generated data and functions.
JIRA NVGPU-2175
Change-Id: Ib04d9845331c9a287666d3b8c974e1d3b66a7677
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2263272
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_cg_pg_enable|disable functions are non-safe hence compile out
power_features.c. Corresponding functions from cg.c are also not
compiled. for e.g. nvgpu_cg_elcg_enable|disable, nvgpu_cg_blcg-
_mode_enable|disable, nvgpu_cg_slcg_gr_perf_ltc_load_enable|disable,
nvgpu_cg_elcg_set_elcg|blcg|slcg_enabled.
BLCG handling in nvgpu_cg_set_mode is non-safe hence compile it out
as well.
JIRA NVGPU-2175
Change-Id: I9940cc418d84eb30979dd50a2ed4a132473312fe
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168957
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add BLCG and SLCG clock gating support for HSHUB unit on gv11b and tu104
Register list for BLCG and SLCG is auto generated with scripts.
Add HAL operations to enable/disable HSHUB clock gating
Re-generate gv11b reglist so that all the manually commented registers
are automatically deleted. Some of the unicast registers are also
deleted. We already have corresponding broadcast registers present.
Bug 2526212
Change-Id: I2654f158daa802bcf992e103ed4a44675aa5fd4d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2150199
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-compile out nvgpu_pmu members which are not required for
safety buid & modified source as required to support same.
-compile out PMU headers include which are not required for
safety code
-Removed unnecessary PMU header includes from some files
JIRA NVGPU-3418
Change-Id: I5364b1b16c46637d229e82745dd2846cb6335a72
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2128228
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
renamed NVGPU_LS_PMU to NVGPU_FEATURE_LS_PMU to follow
nvgpu naming standard
Compile out LS PMU files when PMU RTOS support is
disabled for safety build by setting NVGPU_LS_PMU
build flag to 0
JIRA NVGPU-3418
Change-Id: Ib09924ac25657e932723c10be573f2f701cb7bea
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127794
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move nvgpu_gr_wait_initialized to a gr.init hal function.
Move to hal function to avoid circular dependencies of headers.
Update nvgpu_gr_wait_initialized call to
g->ops.gr.init.wait_initialized
JIRA NVGPU-3016
Change-Id: Ia2e5f78da8528c76a8d08512151483579f250676
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085740
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
set gr.initialized to false in the beginning of gk20a_gr_reset() and
set it to true at the end of successful execution of gk20a_gr_reset.
Use gk20a_gr_wait_initialized() to enable/disable cg/pg
functions to make sure engine is out of reset and initialized.
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: Ic7b0b71382c6d852a625c603dad8609c43b7f20f
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030827
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new power/clock gating functions that can be called by
other units.
New clock_gating functions will reside in cg.c under
common/power_features/cg unit.
New power gating functions will reside in pg.c under
common/power_features/pg unit.
Use nvgpu_pg_elpg_disable and nvgpu_pg_elpg_enable to disable/enable
elpg and also in gr_gk20a_elpg_protected macro to access gr registers.
Add cg_pg_lock to make elpg_enabled, elcg_enabled, blcg_enabled
and slcg_enabled thread safe.
JIRA NVGPU-2014
Change-Id: I00d124c2ee16242c9a3ef82e7620fbb7f1297aff
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
