Add ioctl support to configure and read the max number of lines/ways
in a L2 cache set that can be marked as EVICT_LAST. This is accomplished
through two new ltc hals: set_l2_max_ways_evict_last,
get_l2_max_ways_evict_last. These hals will only be set for nvgpu-next
chips. Incase of legacy chips, the IOCTLs will return error -ENOSYS.
Generate following litter constants to get the number of sets in a l2
slice and the number of ways in each set:
- GPU_LIT_NUM_LTC_LTS_SETS
- GPU_LIT_NUM_LTC_LTS_WAYS
Add gpu characteritics flag: NVGPU_L2_MAX_WAYS_EVICT_LAST_ENABLED to
allow userspace driver to determine if L2_MAX_WAYS_EVICT_LAST ioctl is
supported.
Bug 200605474
Change-Id: Id3180f891399f5e128500f3835d762aee59953e0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2445884
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
gv11b_gr_wait_for_sm_lock_down() uses nvgpu_get_poll_timeout() to
get timeout value for polling of SM lock down status.
nvgpu_get_poll_timeout() returns -1 if timeouts are disabled by
debugger, and if SM lock down fails, nvgpu lands in an infinite loop.
Use g->poll_timeout_default instead of nvgpu_get_poll_timeout() so
that explicit timeout value is always used. This also means that
timeout value of ULONG_MAX will still be used on simulation platforms.
Bug 200676073
Change-Id: I5777e98efcd63f24ade244384cf7b157dcea991d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2478255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mikhail Filimonov <mfilimonov@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Skip setting error notifier on MMUFAULT when a debugger is connected and
debugging is enabled(mmu_debug_mode=on). At present, error notifier causes
the application to teardown the channels and debugger will not be able to
collect any data.
Bug 200632771
Change-Id: Idc4141990d4e2fb4714de9bfd31cfea5e7dcd52a
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2477253
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the nvgpu_runlist_update_for_channel() function:
- Rename it to nvgpu_runlist_update()
- Have it take a pointer to the runlist to update instead
of a runlist ID. For the most part this makes the code
better but there's a few places where it's worse (for
now).
This starts the slow and painful process of moving away from
the non-runlist code using runlist IDs in many places it should
not.
Most of this patch is just fixing compilation problems with
the minor header updates.
JIRA NVGPU-6425
Change-Id: Id9885fe655d1d750625a1c8aceda9e67a2cbdb7a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470304
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Rename struct nvgpu_runlist_info to struct nvgpu_runlist; the
info is not necessary. struct nvgpu_runlist is soon to be a
first class object among the nvgpu object model.
Also rename the fields runlist_info and active_runlist_info to
simply runlists and active_runlists respectively. Again the info
text is just not necessary and somewhat misleading. These structs
_are_ the runlist representations in SW; they are not merely
informational.
Also add an rl_dbg() macro to print debug info specific to
runlist management and some debug prints specifying the runlist
topology for the running chip.
Change-Id: Id9fcbdd1a7227cb5f8c75cca4abbff94fe048e49
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470303
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The NEXT bit can remain set for the channel if timeslice expires before
scheduler clears it. Due to this nvgpu fails TSG unbind and in turn
nvrm_gpu fails channel close. In this case, checking the channel hw
state after some time can help see NEXT bit cleared by scheduler.
Reenable the tsg and return -EAGAIN to nvrm_gpu for it to retry again.
Bug 3144960
Change-Id: I35f417f02270e371a4e632986b73a00f8a4f921a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2468391
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add CAU initialization data in const array hwpm_cau_init_data[].
Add HAL API gops.gr.get_hwpm_cau_init_data() to retrieve this data
and implement it for TU104.
Add new HAL API gops.gr.init_cau() that uses above data and
initializes all cau units. Implement this HAL only for TU104.
Invoke above sequence from nvgpu_profiler_bind_hwpm() in case of
global HWPM mode.
Jira NVGPU-5360
Change-Id: I1c7a380e9d04d6cd45fb7f746c0a79fc56675244
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2463854
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add ptimer register offsets to regops allowlist for testing. New
allowlist restricts regops only to reserved resources, this makes it
difficult to test the interface since only HWPM registers can be
accessed and that could have side effects on system.
Having ptimer registers as test offsets has advantage that the offsets
do not change across chips, registers are read-only, and values are
always incrementing so a test can verify read regops and test various
flags of interface.
Add gops.ptimer.get_timer_reg_offsets() HAL to return timer offsets.
Add static function add_test_range_to_map() that adds timer offsets to
allowlist always.
In nvgpu_profiler_validate_regops_allowlist() return success if timer
offsets are hit in range search.
Bug 2510974
Jira NVGPU-5360
Change-Id: I8b51bb92e43e8b1bbe903c874a429341659ef603
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460002
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Implement below functions:
- nvgpu_profiler_quiesce_hwpm_streamout_resident
Teardown sequence when context is resident or in case profiling
session is a device level session.
- nvgpu_profiler_quiesce_hwpm_streamout_non_resident
Teardown sequence when context is non resident
- nvgpu_profiler_quiesce_hwpm_streamout
Generic sequence to call either of above API based on whether
context is resident or not.
Trigger HWPM streamout teardown sequence while unbinding resources
in nvgpu_profiler_unbind_hwpm_streamout()
Add a new HAL gops.gr.is_tsg_ctx_resident to call
gk20a_is_tsg_ctx_resident() from common code.
Implement below supporting HALs for resident teardown sequence:
- gops.perf.pma_stream_enable()
- gops.perf.disable_all_perfmons()
- gops.perf.wait_for_idle_pmm_routers()
- gops.perf.wait_for_idle_pma()
- gops.gr.disable_cau()
- gops.gr.disable_smpc()
Jira NVGPU-5360
Change-Id: I304ea25d296fae0146937b15228ea21edc091e16
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2461333
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the below two regops ctxsw address types to fix misnomers:
- CTXSW_ADDR_TYPE_ROP:
This address type is used to access the PMM config registers and does not
belong to the ROP unit. Hence, rename it to CTXSW_ADDR_TYPE_PMM_FBPGS_ROP.
- CTXSW_ADDR_TYPE_BE:
This address type is used to access registers exclusively in ROP unit and not
the entire BE unit. Hence, its more appropriate to rename it to
CTXSW_ADDR_TYPE_ROP.
In addition, rename the following functions:
- pri_is_be_addr_shared => pri_is_rop_addr_shared
- pri_be_shared_addr => pri_rop_shared_addr
- pri_is_be_addr => pri_is_rop_addr
- pri_get_be_num => pri_get_rop_num
Bug 3146324
Change-Id: I8613f0972936699b2ef8f7dbe3de78582af2a35f
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2429885
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gr_gv100_reset_hwpm_pmm_registers() writes a bunch of registers in
sys/gpc/fbp chiplets to reset perfmons. To ensure all the writes have
completed it is necessary to readback each chiplet's PRI fence register.
Add and use new HAL g->ops.priv_ring.read_pri_fence() to achieve this.
Implement the HAL for gv11b in new source code file
hal/priv_ring/priv_ring_gv11b.c.
Bug 2510974
Jira NVGPU-5360
Change-Id: If4dd61cb4265422e8c2d16884790eb0fe7f2c103
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2453631
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pascal+ chips do not support updating PC sampling using register
NV_CTXSW_MAIN_IMAGE_PM (Unlike GM20B, bit 6 = PC_SAMPLING is not
present on GP10b, GV11b and TU104). To correct this in NVGPU, we
are setting the set_pc_sampling HAL to NULL.
We need to make sure devtools also does not call into
these APIs. Until the devtools team updates their code, we would
return success(0) from update_pc_sampling API even if the HAL is
set to NULL. Filed http://nvbugs/200671026 for devtools team.
Bug 200604892
Bug 200671026
Change-Id: I6334d4b2a84d7a0f676d7e2faad4befde5f76310
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2437002
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update nvgpu_gr_zbc as:
struct nvgpu_gr_zbc {
struct nvgpu_mutex zbc_lock; /* Lock to access zbc table */
struct zbc_color_table *zbc_col_tbl; /* SW zbc color table pointer */
struct zbc_depth_table *zbc_dep_tbl; /* SW zbc depth table pointer */
struct zbc_stencil_table *zbc_s_tbl; /* SW zbc stencil table pointer */
u32 min_color_index; /* Minimum valid color table index */
u32 min_depth_index; /* Minimum valid depth table index */
u32 min_stencil_index; /* Minimum valid stencil table index */
u32 max_color_index; /* Maximum valid color table index */
u32 max_depth_index; /* Maximum valid depth table index */
u32 max_stencil_index; /* Maximum valid stencil table index */
u32 max_used_color_index; /* Max used color table index */
u32 max_used_depth_index; /* Max used depth table index */
u32 max_used_stencil_index; /* Max used stencil table index */
};
Add global struct nvgpu_gr_zbc_table_indices
struct nvgpu_gr_zbc_table_indices {
u32 min_color_index;
u32 min_depth_index;
u32 min_stencil_index;
u32 max_color_index;
u32 max_depth_index;
u32 max_stencil_index;
};
Currently, hw zbc table registers are written during both
gr_init_setup_sw() and gr_init_setup_hw().
- Modify nvgpu_gr_zbc_load_default_table() to
nvgpu_gr_zbc_load_default_sw_table() to only update sw copy of zbc table
during gr_init_setup_sw().
- Modify nvgpu_gr_zbc_load_table() to write zbc values stored in sw zbc
table to hw registers.
Re-structure zbc function as per zbc type i.e. color, depth and stencil.
Add gr.zbc.init_table_indices() hal to initialize zbc indices. Valid ZBC
table indices start from 1. HW indices start from 0 for color, depth and
stencil tables. Note that the corresponding format registers follow ZBC
index range starting at 1.
- void (*init_table_indices)(struct gk20a *g,
struct nvgpu_gr_zbc_table_indices *zbc_indices);
- Add corresponding functions for legacy chips
- Add zbc color, depth and stencil table size hw defines
- Remove ltc.zbc_table_size() hal
- Update ltc.set_zbc_s_entry(), ltc.set_zbc_color_entry and
ltc.set_zbc_depth_entry() accordingly.
Bug 3122410
Bug 3122649
Change-Id: Ib799991ad35c6613534c0a6eb07f3bf24e600dc5
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417620
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
