Separate nvgpu_cg_blcg/slcg_fb_ltc_load_enable function
into nvgpu_cg_blcg/slcg_fb_load_enable and
nvgpu_cg_blcg/slcg_ltc_load_enable.
Program fb slcg/blcg prod values during fb init and
program ltc slcg/blcg prod values after acr boot to
have correct privilege for ltc cg programming.
Update unit tests to have sperate blcg/slcg hal for
fb and ltc programming.
Bug 3423549
Change-Id: Icdb45528abe1a3ab68a47f689310dee9a4fe9366
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2646039
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocator (bitmap, buddy, page) debugfs files are not cleaned up when
the allocators are destroyed. This leads to warning logs from nvgpu
like below:
[21073.493000] debugfs: File 'gk20a_as_17' in directory 'allocators' already present!
[21073.493026] debugfs: File 'gk20a_as_17-sys' in directory 'allocators' already present!
Remove the per-allocator debugfs node when destroying an allocator in
runtime.
While at this, add missing nvgpu_allocator locking to the function
nvgpu_bitmap_alloc_destroy. And create nop functions for the
functions nvgpu_init_alloc_debug and nvgpu_fini_alloc_debug
when CONFIG_DEBUG_FS is not defined to avoid adding the
CONFIG checks at multiple places.
Move gk20a_debug_deinit to the end of gk20a_free_cb called in nvgpu_put
as that tears down all debugfs entries. Allocator destroy happens as
part of nvgpu_put call and it can lead to invalid debugfs dentry
access if gk20a_debug_deinit is called before it.
Bug 3481097
Change-Id: I8a66bcf6ade7e5707f9207c78a54d12d7bd94c02
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2648012
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvs worker thread is created on each resume and deinitialized on every
suspend. nvgpu can be resumed when process is getting killed. Thread
creation can fail when the process is getting killed. That will lead
to driver resume failure.
To avoid the issue above, don't stop the nvs worker thread in suspend
and let the first created thread handle the nvs work always.
Deinitialize the nvs worker thread during nvgpu unload.
Also, log the error returned by nvgpu_thread_create in the function
nvgpu_worker_start.
bug 3480192
Change-Id: I8d5d9e7716a950b162cc3c2d9fcfde07c4edfcf6
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2646218
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move away from the prototype call in channel wdt worker and create a
separate worker thread for the domain scheduler. The details of runlist
domains are still encapsulated in the runlist code; the domain scheduler
controls when to switch domains. Switching happens based on domain
timeslices or when the current domain is deleted.
The worker thread is paused on railgate and spun back on poweron. The
scheduler data was also left dangling, so fix that by deinitializing all
nvs-related when gk20a_remove_support() is called. The runlist domains
already get freed as part of fifo removal.
Jira NVGPU-6427
Change-Id: I64f42498f8789448d9becdd209b7878ef0fdb124
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2632579
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The flag pmu->pg->golden_image_initialized is set to
true during initial GPU context creation and is not
cleared while the GPU goes into pm_suspend (during railgate).
Hence, when the GPU resumes after un-railgate it retains
the previous value which can cause ELPG to kick in immediately.
Due to this, when ELPG and Railgating are enabled, IDLE_SNAP
is seen for read access of gr_gpc0_tpc0_sm_arch_r reg.
To resolve this, if golden image is ready set the
pmu->pg->golden_image_initialized to suspend state during railgate,
to delay the early enable of ELPG. Add a new
pmu_init_golden_img_state hal in the NVGPU_INIT_TABLE_ENTRY.
This will be called after all the GR access is done and GPU resumes
completely after un-railgate. This hal will then check if
golden_image_initialized flag is in suspend state, it will set it
to ready state and then re-enable ELPG.
Bug 3431798
Change-Id: I1fee83e66e09b6b78d385bbe60529d0724f79e79
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2639188
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Now that the main nvsched code exists in the nvgpu build, make it
control the runlist domains. As a new nvs domain is created, create the
relevant runlist data too. To support the default domain, create a
default nvs domain at boot.
The scheduling domain code owns the responsibility of domain lifetime,
and runlist domains exist to serve that logic although the RL domains
are directly used by channel and TSG logic. Add refcounting to the
scheduler uapi level to make sure that busy domains (that still have TSG
participants) do not get removed too early.
Adjust error injection sensitive unit tests to match the updated logic.
Jira NVGPU-6425
Jira NVGPU-6427
Change-Id: I1beec97c54c60ad334165b1c0acb5e827c24f2ac
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2632287
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add ioctls for creating, removing and querying scheduling domains and
interface with the "nvsched" entity that will be the core scheduler.
Include the scheduler in the Linux build.
The core scheduler code will ultimately hold data on and control what
gets scheduled, but this intermediate layer in nvgpu-rm needs a bit of
bookeeping to manage the userspace interface.
To keep changes isolated, this does not touch the internal runlist
domains yet. The core scheduler logic will eventually control the
runlist domains.
Jira NVGPU-6788
Change-Id: I7b4064edb6205acbac2d8c593dad019d517243ce
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2463625
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On pre-silicon platform, static pg will be
done by nvgpu driver. For this, retain structs
and HALs of static pg.
- Add the static pg support under pre-silicon code.
- On silicon, the static pg will be done by BPMP.
- Rename variables used in static pg for better
readability and consistency
Bug 200768322
JIRA NVGPU-6433
Change-Id: Ib31c0f83b751c2b1563a36bd51af78a0bd12a117
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2594801
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When GPU need to programmed with PA(physical address),
given IPA need to be converted to PA by querying Hypervisor.
As this is an IPC between OSes, the call will reduce the
performance badly. So this is adding a IPA-PA cache to improve
the performance. This will be more helpful in passthr config.
Bug 3277194
Change-Id: I6a3230d858977313a0ed0f33068055a3b516330a
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2571814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api to translate dmabuf's fmode_t to gk20a_mem_rw_flag
for read only/read write mapping selection.
By default dmabuf fd mapping permission should be a maximum
access permission associated to a particual dmabuf fd.
Remove bit flag MAP_ACCESS_NO_WRITE and add 2 bit values for
user access requests NVGPU_VM_MAP_ACCESS_DEFAULT|READ_ONLY|
READ_WRITE.
To unify map access type handling in Linux and QNX move the
parameter NVGPU_VM_MAP_ACCESS_* check to common function
nvgpu_vm_map.
Set MAP_ACCESS_TYPE enabled flag in common characteristics
init function as it is supported for Linux and QNX.
Bug 200717195
Bug 3250920
Change-Id: I1a249f7c52bda099390dd4f371b005e1a7cef62f
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507150
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new Central Interrupt Controller(CIC) unit in common code.
The interrupt handling is done in a distributed manner currently.
The error handling policy for different errors resides in each unit's
ISR code. The goal is to converge this data under one central place -
the CIC unit.
This patch creates framework for CIC unit and moves the gv11b QNX
safety LUT to CIC unit. All the error reporting APIs from different
units are also moved to CIC.
New APIs are exposed by CIC unit to access its internal data like:
1. Struct err_desc - the static err handling /injection data per
error id
2. Num_hw_modules - the number of error reporting HW units
supported by CIC
Init and deinit of CIC unit:
1. CIC unit should be initialized earlyon during boot so that it
is available for any interrupt handling.
2. Initialize CIC just before the interrupts are enabled during
boot.
3. Similarly, CIC is disabled late during deinit cycle; right
after the interrupts are masked.
LUT:
1. LUT is currently used only for reporting error to safety
services in gv11b QNX safety build.
2. This error handling policy LUT currently has only two levels
of handing - correctable and quiecse.
3. Once, the error handling policy decision is moved from leaf
unit nodes to CIC, LUT will be updated to have additional levels
like fast recovery and full recovery.
4. Also, then a separate LUT will be added for each platform/build.
5. In current framework, the LUT is set to NULL for all
configurations except gv11b.
report_err() ops is added to report error to safety services.
This ops is only effective for gv11b qnx build; and set to NULL for
other configurations.
NVGPU-6521
NVGPU-6523
NVGPU-6750
NVGPU-6758
NVGPU-6760
NVGPU-6754
Change-Id: I24be7836a96d787741e37b732e19863ed8014635
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2518683
Reviewed-by: Ajesh K V <akv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added init function for common.ptimer unit and called
this init function during nvgpu early init.
int nvgpu_ptimer_init(struct gk20a *g);
Added following helper function for programming
prod values for slcg timer unit:
void nvgpu_cg_slcg_timer_load_enable(struct gk20a *g);
Invoked prod programming for slcg timer unit from
nvgpu_ptimer_init.
Jira NVGPU-6026
Change-Id: I29e32380a4d05ec8276d7ebe59bc2733917f8184
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2524037
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) nvgpu poweron sequence split into two stages:
- nvgpu_early_init() - Initializes the sub units
which are required to be initialized before the grgmr init.
For creating dev node, grmgr init and its dependency unit
needs to move to early stage of GPU power on.
After successful nvgpu_early_init() sequence,
NvGpu can indetify the number of MIG instance required
for each physical GPU.
- nvgpu_finalize_poweron() - Initializes the sub units which
can be initialized at the later stage of GPU power on sequence.
- grmgr init depends on the following HAL sub units,
* device - To get the device caps.
* priv_ring - To get the gpc count and other
MIG config programming.
* fb - MIG config programming.
* ltc - MIG config programming.
* bios, bus, ecc and clk - dependent module of
priv_ring/fb/ltc.
2) g->ops.xve.reset_gpu() should be called before GPU sub unit
initialization. Hence, added g->ops.xve.reset_gpu() HAL in the
early stage of dGPU power on sequence.
3) Increased xve_reset timeout from 100ms to 200ms.
4) Added nvgpu_assert() for gpc_count, gpc_mask and
max_veid_count_per_tsg for identify the GPU boot
device probe failure during nvgpu_init_gr_manager().
JIRA NVGPU-6633
Change-Id: I5d43bf711198e6b3f8eebcec3027ba17c15fc692
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2521894
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
1) NvGpu dev node needs to be created in gpu power on
early stage to avoid latency introduced by udevd.
For creating dev node, device and grmgr init
needs to move to early stage of GPU power on.
After grmgr init, NvGpu can identify the number of MIG
instance required for each physical GPU.
For that, added a new API nvgpu_early_poweron() to handle
early init which is required for before dev node creation.
2) Removed fifo dependency in nvgpu_init_gr_manager()
3) Used get_max_subctx_count() directly to query
the veid/subctx count.
JIRA NVGPU-6633
Change-Id: Ib9d7c3e184c71237b0da9305515ccd8ceda1d5ad
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2517173
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated set_atomic_mode functionality from
init_fs_state/enable_nvlink and created new
fb gops for set_atomic_mode.
In gpu init sequence, set_atomic_mode is
called after acr_construct_execute to take care
of design changes required for nvgpu-next
architectures.
Updated fb_gv11b_init_test to use set_atomic_mode
gops along with init_fs_state.
Bug 3268664
Change-Id: I1ab9eb21cc4cce77f3325c4e8821a75b6e85fba2
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2508095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch is to disable the clock arbitor for TU104.
TU104 is not a POR for Drive 6.0 so disabling it to easy migration
of clk arb for GA100.
As a first step all the NVRM Clock tests will be skipped by setting
NVGPU_SUPPORT_CLOCK_CONTROLS to false for TU104.
Then clk arbitor will be rewritten for GA100 and enabled back.
This patch implements by adding a new flag NVGPU_CLK_ARB_ENABLED which
holds the status of clk arbitor for each platform and disables them for
TU104
Bug 200699763
Change-Id: I51cd5c7821bdc0b48080c17a70735925b278ddf5
Signed-off-by: absalam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2515086
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
