Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below rc_types to be passed to gk20a_fifo_recover
MMU_FAULT
PBDMA_FAULT
GR_FAULT
PREEMPT_TIMEOUT
CTXSW_TIMEOUT
RUNLIST_UPDATE_TIMEOUT
FORCE_RESET
SCHED_ERR
This is nice to have to know what triggered recovery.
Bug 2065990
Change-Id: I202268c5f237be2180b438e8ba027fce684967b6
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662619
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gv11b_gr_egpc_etpc_priv_addr_table(), we call
gv11b_gr_update_priv_addr_table_smpc() to convert SMPC broadcast address into
list of unicast addresses
But before calling gv11b_gr_update_priv_addr_table_smpc() we sometimes
incorrectly set gpc_num/tpc_num to zero and that leads to generating incorrect
list of unicast addresses
Remove this incorrect initialization of gpc_num/tpc_num
Also update gv11b_gr_egpc_etpc_priv_addr_table() to receive tpc_num along with
gpc_num
Bug 2099717
Jira NVGPU-580
Change-Id: Idd4e5f78dbe6ca1800efae93c66355d06417d1f2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1691373
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and
NV_PMM_FBP_STRIDE which are incorrect for Volta
Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip
Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips
Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta
Use HAL instead of hard coded values wherever required
Bug 200398811
Jira NVGPU-556
Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have new broadcast registers on Volta, and we need to generate correct
unicast addresses for them so that we can write those registers to context image
Add new GR HAL create_priv_addr_table() to do this conversion
Set gr_gk20a_create_priv_addr_table() for older chips
Set gr_gv11b_create_priv_addr_table() for Volta
gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate
appriate list of unicast register for each broadcast register
Bug 200398811
Jira NVGPU-556
Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690027
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now do not handle misaligned_addr SM exception explicitly and hence
we incorrectly initiate CILP on this exception
Handle this exception explicitly in this sequence -
- set error notifier first
- clear the interrupt
- return error from gr_gv11b_handle_warp_esr_error_misaligned_addr() so that
RC recovery is triggered by gk20a_gr_isr()
Ensure that the error value is propagated back to gk20a_gr_isr() correctly
Use nvgpu_set_error_notifier_if_empty() to set error notifier since this will
prevent overwriting of error notifier value in case gk20a_gr_isr() also tries
to write to some error notifier value
Bug 200388475
Jira NVGPU-554
Change-Id: I84c4d202a8068e738567ccd344e05d9d5f6ad2f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1686781
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
If golden context creation happens before any gpu railgate then
channel creation is always fine. If gpu railgate happens after gpu
finalize poweon, but before golden context creation, then golden
context creation is failing during first channel creation with
watchdog timeout from ctxsw because of invalid ctxsw state.
To Fix this issue, if the golden context is not created, then during
finalize power on always query ctxsw image sizes, which is making ctxsw
hw in correct state before golden context creation.
Bug 2051863
Change-Id: I81d221100a099b12bad3adc2d252de4621c335a5
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1682265
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_create_priv_addr_table() and gv11b_gr_egpc_etpc_priv_addr_table(),
we create a table of unicast addresses from broadcast addresses
For GPC boardcast addresses like NV_PGRAPH_PRI_EGPCS_ETPC6_SM_*, we generate
the table assuming there are 7 TPCs in all the GPCs
But this is incorrect in some cases like GV100 where GPC0/1 have only 6 TPCs
And hence we end up generating registers which do not exist
Fix this by explicitly checking the number of TPCs and ensuring that address
generated is belongs to valid TPC
Bug 200400376
Jira NVGPU-564
Change-Id: I65d7d6cd7f0bf16171eb54ed71f1f3840ade3495
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1686806
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Check these conditions for fecs arbiter idle:
1. Wait for gr_fecs_arb_ctx_cmd to idle
2. Wait for gr_fecs_ctxsw_status_1:arb_busy to idle
Just waiting for condition 1, only guarantees dispatching
of command but not completion of work.
Bug 2056266
Change-Id: I3fcbdb9cda91fee0ff345a24bf23ba7dabf268d0
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1667550
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Also revert other changes related to IO coherence. This may be the
culprit in a recent dev-kernel lockdown.
Bug 2070609
Change-Id: Ida178aef161fadbc6db9512521ea51c702c1564b
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1665914
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Srikar Srimath Tirumala <srikars@nvidia.com>
When using a coherent DMA API wee must make sure to program
any aperture fields with the coherent aperture setting. To
do this the nvgpu_aperture_mask() function was modified to
take a third aperture mask argument, a coherent setting, so
that code can use this function to generate coherent aperture
settings.
The aperture choice is some what tricky: the default version
of this function uses the state of the DMA API to determine
what aperture to use for SYSMEM: either coherent or
non-coherent internally. Thus a kernel user need only specify
the normal nvgpu_mem struct and the correct mask should be
chosen. Due to many uses of nvgpu_mem structs not created
directly from the DMA API wrapper it's easier to translate
SYSMEM to SYSMEM_COH after creation.
However, the GMMU mapping code, will encounter buffers from
userspace with difference coerency attributes than the DMA
API. Thus the __nvgpu_aperture_mask() really respects the
aperture setting passed in regardless of the DMA API state.
This aperture setting is pulled from NVGPU_VM_MAP_IO_COHERENT
since this is either passed in from userspace or set by the
kernel when using coherent DMA. The aperture field in attrs
is upgraded to coh if this flag is set.
This change also adds a coherent sysmem mask everywhere that
it can. There's a couple places that do not have a coherent
register field defined yet. These need to eventually be
defined and added.
Lastly the aperture mask code has been mvoed from the Linux
vm.c code to the general vm.c code since this function has
no Linux dependencies.
Note: depends on https://git-master.nvidia.com/r/1664536 for
new register fields.
JIRA EVLR-2333
Change-Id: I4b347911ecb7c511738563fe6c34d0e6aa380d71
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1655220
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Miscellaneous fixes for the sched code:
1. Make sure get_addr() on an SGL respects the use phys flag since
the runlist needs physical addresses when NVLINK is in use.
2. Ensure the runlist is contiguous. Since the runlist memory is
not virtually addressed the buffer must be physically contiguous.
3. Use all 64 bits of the runlist address in the runlist base addr
register (and related fields).
JIRA EVLR-2333
Change-Id: Id4fd5ba4665d3e35ff1d6ca78dea6b58894a9a9a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1654667
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Tested-by: Thomas Fleury <tfleury@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There are numerous places where variables are assigned to but then
never used. This patch cleans up all these unused variables and
in some cases simplifies surrounding logic.
Also delete unused header includes and add necessary header includes.
JIRA NVGPU-525
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: Ice9ec2a0e97f262d0dcfebe22f83208dbea569d9
Reviewed-on: https://git-master.nvidia.com/r/1662548
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-pd, scc, ds, ssync, mme and sked exceptions are
enabled. This will be useful for debugging
-Handle enabled interrupts
-Add gr ops to handle ssync hww. For legacy
chips, ssync hww_esr register is gpcs_ppcs_ssync_hww_esr.
Since ssync hww is not enabled on legacy chips, added
ssync hww exception handling for volta only.
Change-Id: I63ba2eb51fa82e74832df26ee4cf3546458e5669
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1644751
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Data can be speculatively loaded from memory and stay in cache even
when bound check fails. This can lead to unintended information
disclosure via side-channel analysis.
To mitigate this problem insert a speculation barrier.
bug 2039126
CVE-2017-5753
Change-Id: Ib6c4b2f99b85af3119cce3882fe35ab47509c76f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640500
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On gv11b we can have multiple SMs per TPC. Add sm_per_tpc in
vgpu constants to properly dimension the virtual SM to TPC/GPC
mapping in virtualization case.
Use TEGRA_VGPU_CMD_GET_SMS_MAPPING to query current mapping.
Bug 2039676
Change-Id: I817be18f9a28cfb9bd8af207d7d6341a2ec3994b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1631203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Check the availability of ecc units by checking
relevant ecc fuse and fuse overrides.
During gpu boot, initialize ecc units by scrubbing
individual ecc units available. ECC initialization
should be done before gr initialization.
Following ecc units are scrubbed:
SM LRF
SM L1 DATA
SM L1 TAG
SM CBU
SM ICACHE
Bug 200339497
Change-Id: I54bf8cc1fce639a9993bf80984dafc28dca0dba3
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1612734
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
