Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On certain platforms, not all copy engine instances are usable. The user
shouldn't submit any work to these engines. To enforce this, remove
these engines from active/host_engine list, this should ensure that these
engines do not get advertised to userspace. In order to accomplish this
introduce the following functions:
- nvgpu_engine_remove_one_dev: This function removes the specified device
entry from following device lists: fifo->host_engines, fifo->active_engines,
runlist->rl_dev_list, runlist->eng_bitmask.
Replace iteration over LCE device type entries using
nvgpu_device_for_each(g, dev, NVGPU_DEVTYPE_LCE), along with this introduce
macro nvgpu_device_for_each_safe.
Introduce gpu_dbg_ce flag for CE debugging.
Bug 3370462
Change-Id: I2e21f18363c6e53630d129da241c8fece106cd33
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2616711
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The macros defined within the C file in the form
(\
fb_mmu_l2tlb_ecc_status_corrected_err_l2tlb_sa_data_m() |\
fb_mmu_l2tlb_ecc_status_corrected_err_l2tlb1_sa_data_m() \
)
are difficult to detect correctly in libclang based static analyzers.
As a consequence, Hal Checker might be missing some coverage.
Such masks are converted into a static function format to help
mitigate this issue.
Change-Id: Id43e25abda8db4c79f7f6fc604eb6e76e9f6282c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2598063
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Issue observed:
- In GA10B, it was observed that after recovery happens
ELPG does not engage.
- It was because, after CE reset, when nvgpu_submit_twod test
was run to engage ELPG, IDLE_FLIPPED_PWR_OFF signal was asserted.
- This means that when ELPG was engaged (engine is in PWR_OFF),
some idle signal flips (becomes non-idle) and this causes
IDLE_SNAP. After IDLE_SNAP is hit, ELPG will not engage further.
- After debugging from WAVES, it was observed that:
LCE0/LCE1 are not done with the reset sequence.
- The state of these LCE is RESET0. A pri request (pri read
to NV_CE_PCE_MAP register in CE) is seen that kicks it out of
RESET0. After this state, it goes through few states to update
some internal states (states RESET1/RESET2/PCE_MAP etc) and then
eventually settles down to IDLE state.
Solution:
- Read ce_pce_map_r register in recovery sequence (after ce reset).
- It is observed that when this read is added recovery is complete
and post that when nvgpu_submit_two test is executed, ELPG is engaging.
- This means that a pri read is needed after CE reset so that it settles
to idle state properly and post that ELPG can engage properly.
Bug 200734258
Change-Id: I5bb84921ca62a740fde81ffe6c29ccde4ebb341b
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554493
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves all the safe static and non-static functions as well
as its dependencies such as static declared structs into files with
_fusa.c extension. If the original file is left with no functions
remaining then the file is deleted.
Added changes in Makefile, Makefile.sources, nvgpu-hal-new.yaml for
compilation.
Jira NVGPU-3690
Change-Id: I81af67c308705faf8a681df63a6778e7de2076cf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2146761
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves gops init related to SDL from qnx to common-core. For this
purpose, it does the following changes:
- Adds stub functions for linux and posix.
- Updates nvgpu_init.c for mapping err_ops with report error APIs.
- Updates nvgpu_err.h header file to include prototypes related to error
reporting APIs.
- Updates nvgpu-linux.yaml file to include sdl_stub file.
Jira NVGPU-3237
Change-Id: Idbdbe6f8437bf53504b29dc2d50214484ad18d6f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119681
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
