Add new HAL gops.gr.init.set_default_gfx_regs() to set graphics specific
PRI values for graphics contexts in function nvgpu_gr_obj_ctx_alloc().
Add new HAL gops.gr.init.capture_gfx_regs() to capture and save init
values for the PRIs. Add new struct nvgpu_gr_obj_ctx_gfx_regs to hold the
PRI init values.
Define HAL functions gv11b_gr_init_set_default_gfx_regs() and
gv11b_gr_init_capture_gfx_regs(). Set the HAL functions for
gv11b and ga10b.
Register accessors required to set PRIs are auto-generated.
Bug 3506078
Change-Id: I4c2843a274f3c924e402541e600e104ed0c9ed1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671598
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Jonathan Mccaffrey <jmccaffrey@nvidia.com>
GVS: Gerrit_Virtual_Submit
Most SM RAMs are protected with parity (except L1 D-cache TAG mem
which is protected with SEC-DED ECC). The memory corruption errors
reported by these RAMs are therefore uncorrected errors only.
Remove the code to handle corrected errors from GR SM ECC.
The SM RAMS ECC errors currently report error to SDL using ID
GPU_SM_L1_TAG_ECC_(UN)CORRECTED. Update the error reporting to
use the newly created error IDs for Drive 6.0.
JIRA NVGPU-7987
Change-Id: Ic426d45f851d87aafaa7963b937535582cdafadf
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2674389
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The ctxsw ucode saves all the ctxsw'ed TPC priv registers in the TPC
priv segment of the ctxsw image. In ga10b, these registers can be stored
in either of the two arrangements:
- INTERLEAVED: means the format is sorted by address first, then by TPC number
- MIGRATION: exact opposite of interleaved.
Update HAL functions gr_ga10b_process_context_buffer_priv_segment,
gr_ga10b_find_priv_offset_in_buffer to detect the register layout and
calculate the register offset accordingly.
Bug 200737000
Bug 3532165
Change-Id: I305509cf89498cb0c2c5bfa1d867272bdf5f42b3
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2665491
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, VAB implementation is using fixed number of access bits. This
value can be computed using fb_mmu_vidmem_access_bit_size_f() value.
- Modify VAB implementation to compute number of access bits.
- Modify nvgpu_vab structure to hold VAB entry size corresponding to
number of access bits.
- Information given by nvgpu_vab structure is more related to the GPU
than nvgpu_mm structure. Move nvgpu_vab struct element to gk20a struct.
- Add fb.set_vab_buffer_address to update vab buffer address in hw
registers.
- Rename gr.vab_init HAL to gr.vab_reserve to avoid any confusion about
when this HAL should be used.
-Replace gr.vab_release and gr.vab_recover with gr.vab_configure HAL.
Bug 3465734
Change-Id: I1b67bfa9be7728be5bda978c6bb87b196d55ab65
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2659467
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Martin Radev <mradev@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
gops.gr.init.set_default_compute_regs() HAL configures compute specific
settings in safety build and this eliminates need of using SW methods.
Define this HAL for Orin safety build and configure sked check related
registers from the HAL. Other settings done on gv11b are no more
applicable for ga10b safety.
Bug 3456240
Change-Id: Ic125cdf414a5402511949015e3424b8cb2dab1e0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2646284
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch performs the following improvements for VAB:
1) It avoids an infinite loop when collecting VAB information.
Previously, nvgpu incorrectly assumed that the valid bit would
be eventually set for the checker when polling. It may not be set
if a VAB-related fault has occurred.
2) It handles the VAB_ERROR mmu fault which may be caused for various
reasons: invalid vab buffer address, tracking in protected mode,
etc. The recovery sequence is to set the vab buffer size to 0 and
then to the original size. This clears the VAB_ERROR bit. After
reseting, the old register values are again set in the recovery
code sequence.
3) Use correct number of VAB buffers. There's only one VAB buffer on
ga10b, not two.
4) Simplify logic.
Bug 3374805
Bug 3465734
Bug 3473147
Change-Id: I716f460ef37cb848ddc56a64c6f83024c4bb9811
Signed-off-by: Martin Radev <mradev@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2621290
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following error message is getting printed even when there are no fecs
ecc errors:
nvgpu: 17000000.ga10x gv11b_gr_intr_handle_fecs_ecc_error:114
[ERR] error count corrected: 0, uncorrected 0
To avoid confusion, print error messages only when fecs errors
are reported.
Bug 3417834
Change-Id: I96317555b11e1976f33add4b1dc8d84c936c26fb
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2625723
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Start transitioning from an assumption of a single runlist buffer to the
domain based approach where a TSG is a participant of a scheduling
domain that then owns has a runlist buffer used for hardware scheduling.
Concretely, move the concept of a runlist domain up to the users of the
runlist code. Modifications to a runlist need to specify which domain is
modified.
There is still only the default domain that is created at boot.
Jira NVGPU-6425
Change-Id: Id9a29cff35c94e0d7e195db382d643e16025282d
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2621213
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The macros defined within the C file in the form
(\
fb_mmu_l2tlb_ecc_status_corrected_err_l2tlb_sa_data_m() |\
fb_mmu_l2tlb_ecc_status_corrected_err_l2tlb1_sa_data_m() \
)
are difficult to detect correctly in libclang based static analyzers.
As a consequence, Hal Checker might be missing some coverage.
Such masks are converted into a static function format to help
mitigate this issue.
Change-Id: Id43e25abda8db4c79f7f6fc604eb6e76e9f6282c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2598063
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce debug logs printed when gpu_dbg_info or gpu_dbg_fn is set.
- Add gpu_dbg_verbose flag for more verbose debug prints. Update prints
in to ga10b_gr_init_wait_idle(), gm20b_gr_init_wait_fe_idle(),
gv11b_gr_init_write_bundle_veid_state() and
gv11b_gr_init_load_sw_veid_bundle().
- Add gpu_dbg_hwpm flag for hwpm specific debug prints. Update print in
nvgpu_gr_hwpm_map_create().
- Add gpu_dbg_mm for MM specific debug prints. Update prints in
gm20b_fb_tlb_invalidate(), gk20a_mm_fb_flush(),
gk20a_mm_l2_invalidate_locked(), gk20a_mm_l2_flush() and
gv11b_mm_l2_flush().
- Remove gpu_dbg_fn mask print in gr_ga10b_create_priv_addr_table(),
gr_gk20a_get_pm_ctx_buffer_offsets(), gr_gv11b_decode_priv_addr() and
gr_gv11b_create_priv_addr_table().
Jira NVGPU-7183
Change-Id: I9842d567047cb95a42e23b5907ae324214eed606
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602797
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removing SW methods completely requires CUDA changes in perforce.
Because of stage-main and module codelines infrastructure this cannot be
done in single series. Hence keep alive couple of SW methods for CUDA
compatibility until SW methods are removed from CUDA code. SW methods
do not perform any action.
Next steps are for CUDA to stop using SW methods. Once that is
integrated this patch can be reverted to completely remove SW method
support in safety build.
Bug 200748548
Change-Id: I2c70a647bec126bab2d8cac4fe10393be8ba0fb9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2604749
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Improved SDL heartbeat mechanism detects the interrupts triggered by
SW method and treats them as errors. Hence remove the SW method support
completely from safety build. Registers set by SW methods are now set
by default for all the contexts.
Implement new HAL gops.gr.init.set_default_compute_regs() to set the
registers in patch context. Call this HAL while creating each context.
Update gv11b_gr_intr_handle_sw_method() to treat all compute SW methods
as invalid.
Update unit test test_gr_intr_sw_exceptions() so that it now expects
failure for any method/data.
Bug 200748548
Change-Id: I614f6411bbe7000c22f1891bbaf06982e8bd7f0b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2527249
(cherry picked from commit bb6e0f9aa1404f79bcfbdd308b8c174a4fc83250)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602638
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix MISRA rule 13.2 violations of below type from common.gr unit:
nvgpu/drivers/gpu/nvgpu/common/gr/gr_intr.c:108
Type: MISRA C-2012 Side Effects (MISRA C-2012 Rule 13.2, Required)
nvgpu/drivers/gpu/nvgpu/common/gr/gr_intr.c:108:
1. misra_c_2012_rule_13_2_violation:
In "nvgpu_safe_add_u32(nvgpu_gr_gpc_offset(g, gpc), nvgpu_gr_tpc_offset(g, tpc))",
there are 2 function calls in the arguments for which the order of
evaluation is undefined.
Jira NVGPU-7127
Change-Id: Ie867fb62098eed3a45ec01b941eda93b94220b4b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2598696
(cherry picked from commit 15483df6ca1017e5b9d6f2dff35f7e57094a2b4d)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601976
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- Accessing any PGRAPH registers in GR intr retrigger
ISR routine when ELPG is engaged causes idle snap.
- This idle snap is caught when nvgpu_submit_illegal_class
test is run.
- To avoid access to PGRAPH registers when ELPG is engaged
add elpg protected call for GR intr retrigger and CE ISR
and retrigger HALs
Bug 200777033
Change-Id: Ieef4a423faf79f09476d696c3078b113750548bb
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2586449
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add Setter and Getter methods for accessing tsg->sm_error_states.
Getter returns a constant pointer for struct nvgpu_tsg_sm_error_state.
This renders it unnecessary to add BVEC for above fields for the struct
in multiple locations. The current design ensures that only a constant
pointer is obtained from the owner unit i.e. FIFO.
The following new methods are added. Both unit tests and BVEC tests
are added for them as well.
nvgpu_tsg_store_sm_error_state
nvgpu_tsg_get_sm_error_state
Jira NVGPU-6947
Change-Id: I82c22a2774862c8579baa41b6fb8292fa164704a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
(cherry picked from commit 79574638671a0c6efe41cd3423668fcd1bd96826)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556938
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
These errors are now actually expected from code that counts number of
sys/gpc/fbp perfmons after first context creation. Nvgpu tries to count
them by register offset lookup in context image and counts perfmons until
invalid offset is found.
nvgpu_gr_hwmp_map_find_priv_offset no longer prints an error message.
The correct error condition is moved to gr_exec_reg_ops
Bug 200755537
Change-Id: Ib5c6ccd39275b2b06e3f8bce4878a3234478a780
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2586228
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
After CONFIG_UBSAN kernel compilation flag to know any shifting
cause overflow or not enablement ,this is identified.
The register "gr_fe_tpc_fs_r(gpc_index)" is read only after
Volta. The gops where we are computing the index is not needed.
Bug 200727116
Change-Id: Ib2306103389ba9df77fd59d012ec70e775104989
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573296
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, the ECC errors go unnoticed. ECC errors in GR are handled
by incrementing the ecc counters and clearing the intr registers. No
action is taken bassed on the ECC counters. The ECC intr prints are
also not printed by default.
Ideally, the ECC errors should trigger recovery if they cross the
error threshold. While we wait for the ideal ECC handling, convert
the conditional ECC prints to error messages.
JIRA NVGPU-7058
Change-Id: I2e54aeb5aef1d76dd6d4162eedd21cd529089b54
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573029
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following modifications,
1) Added logic to skip the graphics unit specific sw context load
register write during context creation when MIG is enabled.
2) Added logic to skip the graphics unit specific sw method
register write when MIG is enabled.
3) Added logic to skip the graphics unit specific slcg and blcg gr
register write when MIG is enabled.
4) Fixed some priv errors observed during MIG boot.
5) Added MIG Physical support for GPU count < 1.
6) Host clk register access is not allowed for GA100.
So skipped to access host clk register.
7) Added utiliy api - nvgpu_gr_exec_with_ret_for_all_instances()
8) Added gr_pri_mme_shadow_ram_index_nvclass_v() reg field
to identify the sw method class number.
Bug 200649233
Change-Id: Ie434226f007ee5df75a506fedeeb10c3d6e227a3
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2549811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. misra_c_2012_rule_8_6_violation: "gm20b_gr_init_fe_go_idle_timeout"
is declared but never defined.
Fix by adding config CONFIG_NVGPU_HAL_NON_FUSA for header declaration
of "gm20b_gr_init_fe_go_idle_timeout"
2. misra_c_2012_rule_5_7_violation: Identifier "ops" is already used
to represent a type.
Fix by renaming local variable ops to nonstall_ops in
gm20b_gr_intr_nonstall_isr()
3. missing_default: No default case found for the switch statement
"switch (offset << 2)"
Fix by adding break and default statements to switch case in
gv11b_gr_intr_handle_sw_method()
Jira NVGPU-6779
Change-Id: I8df097ec66479edcd2e81bf46bab5b5db52ac8c8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2541246
(cherry picked from commit c4d9fe0449f8c6ee209051abfe58c6f3a745808d)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2543012
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
