This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
All graphics code is under CONFIG_NVGPU_GRAPHICS and all the HALs are
in non-fusa files. In order to support graphics in safety,
CONFIG_NVGPU_GRAPHICS needs to be enabled. But since most of the HALs
are in non-fusa files, this causes huge compilation problem.
Fix this by moving all graphics specific HALs used on gv11b to fusa
files. Graphics specific HALs not used on gv11b remain in non-fusa files
and need not be protected with GRAPHICS config.
Protect call to nvgpu_pmu_save_zbc() also with config
CONFIG_NVGPU_POWER_PG, since it is implemented under that config.
Delete hal/ltc/ltc_gv11b.c since sole function in this file is moved to
fusa file.
Enable nvgpu_writel_loop() in safety build since it is needed for now.
This will be revisited later once requirements are clearer.
Move below CTXSW methods under CONFIG_NVGPU_NON_FUSA for now. Safety
CTXSW ucode does not support these methods. These too will be revisited
later once requirements are clearer.
NVGPU_GR_FALCON_METHOD_PREEMPT_IMAGE_SIZE
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_ZCULL_IMAGE_SIZE
Jira NVGPU-6460
Change-Id: Ia095a04a9ba67126068aa7193f491ea27477f882
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2513675
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce new HAL gops_ltc.set_l2_sector_promotion to configure L2
sector promotion policy. The follow three promotion settings are support:
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_NONE
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_64B
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_128B
Add ioctl "NVGPU_TSG_IOCTL_SET_L2_SECTOR_PROMOTION" to the gpu tsg node
to support l2 sector promotion. On chips which do not support sector
promotion, the ioctl returns 0.
Bug 200656177
Change-Id: Iad835a5c954d3b10da436cfafb388aaaa04f44c7
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460553
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Update nvgpu_gr_zbc as:
struct nvgpu_gr_zbc {
struct nvgpu_mutex zbc_lock; /* Lock to access zbc table */
struct zbc_color_table *zbc_col_tbl; /* SW zbc color table pointer */
struct zbc_depth_table *zbc_dep_tbl; /* SW zbc depth table pointer */
struct zbc_stencil_table *zbc_s_tbl; /* SW zbc stencil table pointer */
u32 min_color_index; /* Minimum valid color table index */
u32 min_depth_index; /* Minimum valid depth table index */
u32 min_stencil_index; /* Minimum valid stencil table index */
u32 max_color_index; /* Maximum valid color table index */
u32 max_depth_index; /* Maximum valid depth table index */
u32 max_stencil_index; /* Maximum valid stencil table index */
u32 max_used_color_index; /* Max used color table index */
u32 max_used_depth_index; /* Max used depth table index */
u32 max_used_stencil_index; /* Max used stencil table index */
};
Add global struct nvgpu_gr_zbc_table_indices
struct nvgpu_gr_zbc_table_indices {
u32 min_color_index;
u32 min_depth_index;
u32 min_stencil_index;
u32 max_color_index;
u32 max_depth_index;
u32 max_stencil_index;
};
Currently, hw zbc table registers are written during both
gr_init_setup_sw() and gr_init_setup_hw().
- Modify nvgpu_gr_zbc_load_default_table() to
nvgpu_gr_zbc_load_default_sw_table() to only update sw copy of zbc table
during gr_init_setup_sw().
- Modify nvgpu_gr_zbc_load_table() to write zbc values stored in sw zbc
table to hw registers.
Re-structure zbc function as per zbc type i.e. color, depth and stencil.
Add gr.zbc.init_table_indices() hal to initialize zbc indices. Valid ZBC
table indices start from 1. HW indices start from 0 for color, depth and
stencil tables. Note that the corresponding format registers follow ZBC
index range starting at 1.
- void (*init_table_indices)(struct gk20a *g,
struct nvgpu_gr_zbc_table_indices *zbc_indices);
- Add corresponding functions for legacy chips
- Add zbc color, depth and stencil table size hw defines
- Remove ltc.zbc_table_size() hal
- Update ltc.set_zbc_s_entry(), ltc.set_zbc_color_entry and
ltc.set_zbc_depth_entry() accordingly.
Bug 3122410
Bug 3122649
Change-Id: Ib799991ad35c6613534c0a6eb07f3bf24e600dc5
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417620
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, priv ring interrupts were not triggered for PLM L2
registers. So, read back was implemented to confirm data written
to L2 registers.
Verified that LTC registers are not PLM protected, and read back
implemented after write is not necessary.
Replace nvgpu_writel_check with nvgpu_writel.
Bug 200625897
Bug 2989973
Jira NVGPU-5490
Change-Id: Ie0815899589c506e13ab2f9342657cb4d68b8fc8
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2363384
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch removes the reporting of _ECC_CORRECTED errors which are
not applicable to GV11B. Specifically, this patch removes the code
related to the reporting of the following service IDs:
NVGUARD_SERVICE_IGPU_SM_SWERR_LRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_CBU_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_PMU_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GPCCS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_FECS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GCC_SWERR_L15_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_FA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_L2TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PTE_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PDE0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_MISS_FIFO_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_S2R_PIXPRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_TSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_RSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_DSTG_BE_ECC_CORRECTED
Bug 200616002
Change-Id: I199c396f9f6a6be007bd6d3c556199b5a73c3c91
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2349587
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use nvgpu_writel() instead of nvgpu_writel_check() for writing the zbc
color, depth and stencil values in L2 ZBC registers. Checking that the
read value equals is not sensible for broadcast registers, and in these
cases it's not necessary to read back the regs to synchronize memory.
Bug 2976632
Change-Id: Id40e7d0f435bae5a395b5553c186fc50302f7dea
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2345877
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, size of zbc index table is defined as a macro. This macro is
independent of the number of address bits in the ltc zbc index register.
Adding below hal will update zbc index table size as per number of
address bits.
Add hal to get gr_zbc_index_table_size:
u32 (*zbc_table_size)(struct gk20a *g);
ZBC index table address 0 is reserved. Logic to start zbc table index
from 1 is moved to corresponding hals.
JIRA NVGPU-4838
Change-Id: I700cadfdd1f3dc5f323055b8f44d769d6627920a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2288479
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The HAL gops_ltc.init_fs_state is private to the common.ltc unit, thus
the gv11b implementation gv11b_ltc_init_fs_state is private. So, hide it
from doxygen to cleanup SWVR traceability.
JIRA NVGPU-4818
Change-Id: I141d89e6e4859fb9dd554a2943a39939e6461084
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2280642
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ifdef function prototypes with CONFIG_* defines. This fixes MISRA rule
8.6 violations which complain about undefined functions.
Also moved nvgpu_channel_get_from_file prototype to ioctl_channel.h &
nvgpu_probe to driver_common.h as those are linux specific. Define
nvgpu_init_soc_vars in posix/soc.c as it is implemented in QNX.
JIRA NVGPU-3873
Change-Id: I5d2b238e1b5d1318867cd2416ac5f03cc6ab7c6a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196794
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
