- The hardware is designed in such a way that
if GR engine is not out of reset, it still takes clock.
- This causes ELCG feature to not engage correctly.
- So for iGPU, SW should bring all supported GR
engines out of reset during gpu boot, if MIG feature
is not enabled.
- This will help low power feature like elcg to
engage correctly and improve dynamic power savings.
- For dGPU, all GRs are out of reset by default by dev init.
Bug 200778542
Change-Id: I5f3519f73b4aaf1804fd112f28fe980f58181cd8
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613718
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following modifications,
1) Added logic to skip the graphics unit specific sw context load
register write during context creation when MIG is enabled.
2) Added logic to skip the graphics unit specific sw method
register write when MIG is enabled.
3) Added logic to skip the graphics unit specific slcg and blcg gr
register write when MIG is enabled.
4) Fixed some priv errors observed during MIG boot.
5) Added MIG Physical support for GPU count < 1.
6) Host clk register access is not allowed for GA100.
So skipped to access host clk register.
7) Added utiliy api - nvgpu_gr_exec_with_ret_for_all_instances()
8) Added gr_pri_mme_shadow_ram_index_nvclass_v() reg field
to identify the sw method class number.
Bug 200649233
Change-Id: Ie434226f007ee5df75a506fedeeb10c3d6e227a3
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2549811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This is adding code to select MIG mode and boot
the GPU with selected mig config.
For testing MIG, after system boots
1. write mig_mode_config by
echo x > /sys/devices/gpu.0/mig_mode_config for igpu
echo x > /sys/devices/./platform/14100000.pcie/pci0001:00/0001:00:00.0/0001:01:00.0/ for dgpu
2. Then run any nvgpu* tests or nvrm_gpu_info.
If the mig_mode need to be changed , note down the supported
configs by "cat mig_mode_config_list" and reboot the system
3. Follow steps 1 and 2.
example output:
"cat mig_mode_config" 2
"cat mig_mode_config_list"
+++++++++ Config list Start ++++++++++
CONFIG_ID : 0 for CONFIG NAME : 2 GPU instances each with 4 GPCs
CONFIG_ID : 1 for CONFIG NAME : 4 GPU instances each with 2 GPCs
CONFIG_ID : 2 for CONFIG NAME : 7 GPU instances - 1 GPU instance with 2
GPCs + 6 GPU instances each with 1 GPC
CONFIG_ID : 3 for CONFIG NAME : 5 GPU instances - 1 GPU instance with 4
GPCs + 4 GPU instances each with 1 GPC
CONFIG_ID : 4 for CONFIG NAME : 4 GPU instances - 1 GPU instance with 2
GPCs + 2 GPU instances each with 1 GPC + 1 GPU instance with 4 GPCs
CONFIG_ID : 5 for CONFIG NAME : 6 GPU instances - 2 GPU instances each
with 2 GPCs + 4 GPU instances each with 1 GPC
CONFIG_ID : 6 for CONFIG NAME : 5 GPU instances - 1 GPU instance with
2 GPCs + 2 GPU instances each with 1 GPC + 2 GPU instances with 2 GPCs
CONFIG_ID : 7 for CONFIG NAME : 5 GPU instances - 2 GPU instances each
with 2 GPCs + 1 GPC instance with 2 GPCs + 2 GPU instances with 1 GPC
CONFIG_ID : 8 for CONFIG NAME : 5 GPU instances - 1 GPC instance with 2
GPCs + 2 GPU instances each with 1 GPC + 2 GPU instances each with 2
GPCs
CONFIG_ID : 9 for CONFIG NAME : 1 GPU instance with 8 GPCs
++++++++++ Config list End +++++++++++
JIRA NVGPU-6633
Change-Id: I3e56f8c836e1ced8753a60f328da63916faa7696
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2522821
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) nvgpu poweron sequence split into two stages:
- nvgpu_early_init() - Initializes the sub units
which are required to be initialized before the grgmr init.
For creating dev node, grmgr init and its dependency unit
needs to move to early stage of GPU power on.
After successful nvgpu_early_init() sequence,
NvGpu can indetify the number of MIG instance required
for each physical GPU.
- nvgpu_finalize_poweron() - Initializes the sub units which
can be initialized at the later stage of GPU power on sequence.
- grmgr init depends on the following HAL sub units,
* device - To get the device caps.
* priv_ring - To get the gpc count and other
MIG config programming.
* fb - MIG config programming.
* ltc - MIG config programming.
* bios, bus, ecc and clk - dependent module of
priv_ring/fb/ltc.
2) g->ops.xve.reset_gpu() should be called before GPU sub unit
initialization. Hence, added g->ops.xve.reset_gpu() HAL in the
early stage of dGPU power on sequence.
3) Increased xve_reset timeout from 100ms to 200ms.
4) Added nvgpu_assert() for gpc_count, gpc_mask and
max_veid_count_per_tsg for identify the GPU boot
device probe failure during nvgpu_init_gr_manager().
JIRA NVGPU-6633
Change-Id: I5d43bf711198e6b3f8eebcec3027ba17c15fc692
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2521894
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
1) NvGpu dev node needs to be created in gpu power on
early stage to avoid latency introduced by udevd.
For creating dev node, device and grmgr init
needs to move to early stage of GPU power on.
After grmgr init, NvGpu can identify the number of MIG
instance required for each physical GPU.
For that, added a new API nvgpu_early_poweron() to handle
early init which is required for before dev node creation.
2) Removed fifo dependency in nvgpu_init_gr_manager()
3) Used get_max_subctx_count() directly to query
the veid/subctx count.
JIRA NVGPU-6633
Change-Id: Ib9d7c3e184c71237b0da9305515ccd8ceda1d5ad
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2517173
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fuse registers should be queried with physical gpc-id and not the
logical ones. For tu104 and before chips physical gpc-ids are same as
logical for non-floorswept config but for newer chips it may differ.
Also, logical to physical mapping is not present for a floorswept gpc so
query gpc_tpc mask only upto actual gpcs that are present.
Jira NVGPU-6080
Change-Id: I84c4a3c1f256fdd1927f4365af26e9892fe91beb
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417721
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following code changes,
1) Added api to get the gr_config per gr_instance_id basis.
2) Added api to covert from gpu_instance_id to gr_instance_id.
3) Modified nvgpu_gr_exec_with_ret_for_instance() utility to handle
generic data return type.
JIRA NVGPU-5662
JIRA NVGPU-5663
Change-Id: I4ab732e15cdbda25672975f99e23b5e5d27decb0
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413195
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Expose below two new APIs from common.grmgr unit
nvgpu_grmgr_get_gr_num_gpcs() - get per instance number of GPCs
nvgpu_grmgr_get_gr_gpc_phys_id() - get physical GPC id for MIG engine
local id in corresponding instance
Execute gr_init_config() for each GR instance.
Add gr_config_init_mig_gpcs() to initialize GPC data in case MIG is
enabled. Separate out gr_config_init_gpcs() for legacy GPC data
initialization.
These functions will inititialize below data in struct nvgpu_gr_config:
max_gpc_count
gpc_count
gpc_mask
gpc_tpc_mask[gpc_count]
max_tpc_per_gpc_count
Rest of the values in struct nvgpu_gr_config are either based on above
values, or read from HW after setting GPC PRI window.
In gr_config_alloc_struct_mem(), rename total_gpc_cnt to total_tpc_cnt
since it represents total TPC count and not GPC. Remove use of temp3
variable since it does not give any idea on usage.
Jira NVGPU-5648
Change-Id: I646cac2ddc312e72b241b1b2a0e51a5cce141535
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406390
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
API nvgpu_grmgr_get_gr_syspipe_id() right now traverses all the GPU
instances to find requested gr_instance_id. But logically,
gr_instance_id is always going to be same as gpu_instance_id since
nvgpu only supports one GR engine instace per GPU instance.
Fix this function by extracting GPU instance based on gr_instance_id
and then fetching syspipe_id stored for that GPU instance.
Jira NVGPU-5648
Change-Id: Ie7b86d765006353d0571e786a8089e7f75f779c3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2405406
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a new header file <nvgpu/gr/gr_instances.h> that supports below
macros to execute various functions for GR instances
1) nvgpu_gr_exec_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns void.
2) nvgpu_gr_exec_with_ret_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns an error.
3) nvgpu_gr_exec_for_all_instances
Execute a function for all GR instances at once. For this GR remap
window needs to be disabled temporarily.
If CONFIG_NVGPU_MIG is disabled, all above macros will turn into simple
funciton calls.
If CONFIG_NVGPU_MIG is disabled or if runtime flag NVGPU_SUPPORT_MIG is
disabled, all above macros will turn into simple function calls that
configure single GR instance.
Separate out GR engine reset code into new API gr_reset_engine() and
execute it with nvgpu_gr_exec_with_ret_for_each_instance().
PROD values need to be loaded in legacy mode, hence call
nvgpu_cg_init_gr_load_gating_prod() inside
nvgpu_gr_exec_for_all_instances().
Rename gr_init_prepare_hw() to more appropriate
gr_reset_hw_and_load_prod()
Moe gops.gr.init.fifo_access() call to gr_init_reset_enable_hw().
Add new API nvgpu_grmgr_get_gr_syspipe_id() to query GR instance syspipe
id from common.grmgr unit. Add nvgpu_gr_get_syspipe_id() that returns
same value stored in nvgpu_gr struct.
Add cur_gr_instance field to struct nvgpu_gr to track current GR
instance being programmed under remap window.
Jira NVGPU-5648
Change-Id: I86920303427a6e6547ebf195daa37438365bb38e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2403550
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_grmgr_get_num_gr_instances() that returns number of
GR instance enumerated by GR manager. This just returns number of sys
pipes enabled since it is same as number of GR instances.
For consistency until common.gr supports multiple GR instances
completely, add a temporary macro NVGPU_GR_NUM_INSTANCES and set it
to 1. If this macro is changed to 0 (for local MIG testing), fall
back to use nvgpu_grmgr_get_num_gr_instances() to get enumerated number
of GR instances.
Use a for loop to initialize other variables of struct nvgpu_gr.
Remove unnecessary NULL check in nvgpu_gr_alloc() since struct gk20a
pointer can never be NULL in this path. Also remove corresponding unit
test code.
Jira NVGPU-5648
Change-Id: Id151d634a23235381229044f2a9af89e390886f2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400151
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following minor modifications,
* Added input validation in the beginning of gr remap window call.
* Changed gr_syspipe_lock/unlock sequence to handle legacy GR remap
window sequence.
JIRA NVGPU-5645
JIRA NVGPU-5646
Change-Id: I48758444096d2a962dbf087bcb211b7f8eacf326
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2399603
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
