Implmented functions to load and execute PUB which
is the safety POR.
PUB has following functionality:
1) Lower PLM
2) Reset PMU
3) FBPA register access to devtools
Secure Boot and Runtime (SBR) microcode comprises of
single PLM Update Binary (PUB) which will execute on
SEC2 Engine Falcon. NVGPU shall load and execute PUB
and wait for falcon halt. On successful halt NVGPU
shall proceed with ns ucode loading on respective
falcons.
NVGPU-4549
Change-Id: I8ea897a026bbe2b1714823aba51bfa51864dd68a
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292330
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under include folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from include which only
clk can access.
All public items are moved into include/clk.h which other units can
access and removed the clk_xxx.h files
NVGPU-4689
Change-Id: I469270ae539e09a3f6fe6187207791732407863e
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298220
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from pmuif which only
clk can access.
All public items are moved into include/clk.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4491
Change-Id: Iccb0571e05ecb3cb13363390bed8c7214409b543
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292318
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, size of zbc index table is defined as a macro. This macro is
independent of the number of address bits in the ltc zbc index register.
Adding below hal will update zbc index table size as per number of
address bits.
Add hal to get gr_zbc_index_table_size:
u32 (*zbc_table_size)(struct gk20a *g);
ZBC index table address 0 is reserved. Logic to start zbc table index
from 1 is moved to corresponding hals.
JIRA NVGPU-4838
Change-Id: I700cadfdd1f3dc5f323055b8f44d769d6627920a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2288479
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
From gv11b onwards, FECS ucode returns an ACK for set watchdog
timeout method. Failure to wait for this ACK was leading to races,
and in some cases, the ACK could be mistaken for the reply to the
next method.
In particular, this happened for the discover golden image size
method which is sent after set watchdog timeout.
With instrumented FECS ucode, it takes longer for the code to
process the set watchdog timeout method, and the write to ack
that method could happen after nvgpu driver clears the mailbox to
send the discover image size method.
With an invalid golden context image size, FECS ended up causing
an MMU fault while attempting to save past allocated buffer.
Added NVGPU_GR_FALCON_METHOD_SET_WATCHDOG_TIMEOUT to be used with
gops_gr_falcon.ctrl_ctxsw, and implemented 2 variants:
- gm20b_gr_falcon_ctrl_ctxsw, without ACK
- gv11b_gr_falcon_ctrl_ctxsw, with ACK
Added NVGPU_GR_FALCON_SUBMIT_METHOD_F_LOCKED flag to allow
executing above method without re-acquiring FECS lock. Longer term,
the 'flags' could be added to gop_gr_falcon.ctrl_ctxsw parameters.
Use gops_gr_falcon.ctrl_ctxsw instead of register writes to invoke
set watchdog timeout method in gm20b_gr_falcon_wait_ctxsw_ready.
Also replaced calls to gm20b_gr_falcon_ctrl_ctxsw to
gops_gr.falcon.ctrl_ctxsw when appropriate, since there are
multiple variants (gm20b, gp10b and gv11b).
Last, fixed clearing of mailbox 0 in gm20b_gr_falcon_bind_instblk.
Bug 200586923
Change-Id: I653b9a216555eec8cd4bb01d6f202bc77b75a939
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287340
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Xavier Chip Product POR was updated to 20G only. No more qual work
happening for 16G. So we do not plan to support 16G. Now that we have
a single speed left, remove the code added to support nvlink speed from
VBIOS as it is redundant.
JIRA NVGPU-2964
Change-Id: Icd71ebb8271240818e36d40bf73c60f0c5beb6bf
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284175
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt functions from
pmu_pstate.c to volt.c as it belongs there and also move the
arbitor specific functions under CLK_ARB as they will be removed
from safety build.
This patch does the following
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
*Replace pmu.h with nvgpu_mem.h in boardobj.h
*Rename obj_volt to nvgpu_pmu_volt
NVGPU-4491
NVGPU-4492
Change-Id: I9abc96f695fce41893311982a80dc3656aaa64d6
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2282361
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch removes dependency between pmu.clk and hal.clk.
Below is the implementation.
*Init the clk domains inside pmu.clk unit.
*Set this in a member variable and send it to hal.clk unit
*Use this to determine the valid clock domains and read the
monitor registers for each valid domains.
*Return the domain with error code.
*With this all the clk domain data is removed from hal.clk and
only pmu.clk uses it as it owns it.
JIRA NVGPU-4491
Change-Id: Ie57b2472cfaacfd2ce43ac7f95702bd95fb8bbaa
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2272416
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute on
different hardware resources. This feature proposes modifications
in the software to modify the virtual SM id to TPC mapping across
the mission and redundant contexts. The virtual SM identifier to TPC
mapping is done by nvgpu when setting up the patch context.
The recommendation for the redundant setting is to offset the
assignment by one TPC, and not by one GPC. This will ensure that both
GPC and TPC diversity. The SM and Quadrant diversity will happen
naturally. For kernels with few CTAs, the diversity is guaranteed
to be 100%. In case of completely random CTA allocation,
e.g. large number of CTAs in the waiting queue, the diversity is
1 - 1/#SM, or 87.5% for GV11B, 97.9% for TU104.
Added NvGpu CFLAGS to enable/disable the SM diversity support
"CONFIG_NVGPU_SM_DIVERSITY".
This support is only enabled on gv11b and tu104 QNX non safety build.
JIRA NVGPU-4685
Change-Id: I8e3eaa72d8cf7aff97f61e4c2abd10b2afe0fe8b
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Device info data format has changed from gp10b to
gv11b, and MMU fault id was incorrectly decoded for GR engine.
Add gv11b_device_info_parse_data HAL to decode device info
data with correct field definitions.
Move gp10b device_info parse data to non-fusa, since
it is not used anymore in safety build.
Jira NVGPU-4511
Change-Id: I2b3f3b5fec977d63a9ad6cfd99c04f375cf997e8
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2262217
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt unit from perf to pmu
as it belongs there and also move the arbitor specific functions under
CLK_ARB as they will be removed from safety build.
This patch does the following
*Move volt struct from perf to pmu
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
NVGPU-4491
NVGPU-4492
Change-Id: I7180cd12bbf91cc4d2e79b6e2d71c16e494c8ff0
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268215
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fbpa related functions are not supported on igpu safety. Don't
compile them if CONFIG_NVGPU_DGPU is not set.
Also compile out fb and ramin hals that are dgpu specific.
Update the tests for the same.
JIRA NVGPU-4529
Change-Id: I1cd976c3bd17707c0d174a62cf753590512c3a37
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2265402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pwr_csb slcg, blcg gating registers are covered by pmu slcg/blcg hence
its load functions are not used. Hence, delete the generated data and
functions. slcg, blcg ctxsw_firmware and pg_gr gating reglists are
null hence delete the generated data and functions.
JIRA NVGPU-2175
Change-Id: Ib04d9845331c9a287666d3b8c974e1d3b66a7677
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2263272
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- nvgpu_gr_ctx_load_golden_ctx_image() does not return any error, change
the return type to void
- Check for preemption modes greater than CILP in
nvgpu_gr_ctx_check_valid_preemption_mode
- Check if received class is valid or not in
nvgpu_gr_setup_set_preemption_mode
- Compile out entire nvgpu_gr_obj_ctx_init_ctxsw_preemption_mode since
it is really not doing anything in safety
- Remove the switch statement in nvgpu_gr_obj_ctx_set_compute_preemption_mode
since it is not possible to receive any other value than supported.
Previous function calls ensure that input values are validated.
- nvgpu_gr_obj_ctx_commit_global_ctx_buffers() does not return any
error, change the return type to void
- gops.gr.init.preemption_state HAL is not needed in safety since it
only configures gfxp related timeout
- remove redundant call to gops.gr.init.wait_idle in
nvgpu_gr_obj_ctx_commit_hw_state. We trigger wait despite earlier
failure in same function call.
Jira NVGPU-4457
Change-Id: I06a474ef7cc1b16fbc3846e0cad1cda6bb2bf2af
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2260938
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split GR ECC initialization into GPC/TPC and FECS ECC init as FECS ECC
errors during acr_construct_execute need to be reported and handled
hence FECS ECC counters are required to be initialized before
acr_construct_execute.
GPC/TPC ECC counters are dependent on the GR config that will be
initialized only after acr_construct_execute.
nvgpu_gr_intr_init_support is moved to nvgpu_gr_prepare_sw.
FECS ECC interrupt is enabled by default hence interrupt is not
enabled through gr_fecs_host_int_enable_r in nvgpu_gr_prepare_sw.
JIRA NVGPU-4439
Change-Id: Ifc9912f0578015a6ba1e9d38765c42633632b15f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2261987
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
handle_tex_exception hal is not set for safety build. Add
CONFIG_NVGPU_HAL_NON_FUSA checking for that hal.
log_mme_exception hal is supported only for turing. Add
CONFIG_NVGPU_DGPU checking for that hal.
gr_intr_handle_class_error always return -EINVAL. Change the
return as void to avoid unwanted error checking.
nvgpu_gr_intr_get_channel_from_ctx function parameter curr_tsgid will
never be NULL based on the current call. Remove unwanted
(curr_tsgid != NULL) check from this function.
Jira NVGPU-4454
Change-Id: I165d1cc5f9e308dfb11d905b59151b44f63a31bb
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2259763
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Minion Ucode is enabling HS Ucode Encyrption. Minion Ucode builds
will put out separate Debug-signed and Prod-signed Encrypted image
files. The driver will load prod image or debug image depending
on the setting of DEBUG fuse setting.
Add support to read the SCP_CTL_STAT register to differentiate
debug and prod boards and load correct binary accordingly.
Update the binary name to support two minion ucodes binaries in
the build.
JIRA NVLINK-283
Bug 2701677
Change-Id: I5348e9705708eeab4ce639b0721f10882d8970a7
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2258097
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute
on different hardware resources.
This feature requires a change in software to make it possible
to modify the virtual SM id to TPC mapping across mission and
redundant contexts.
This CL adds only SM diversity flags which are exposed to
its clients through ioctl/devctl interfaces.
Actual virtual SM id to TPC mapping implementation
will be part of upcoming patch sets.
Added NvGpu CFLAGS to identify the safety build
"CONFIG_NVGPU_BUILD_CONFIGURATION_IS_SAFETY"
JIRA NVGPU-4133
Change-Id: I5a18256780e6726e399e39c1c8d155d2ef07d7bd
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2250461
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_mc_log_pending_intrs is debugging related function hence compile
out that and related functionality under CONFIG_NVGPU_NON_FUSA.
nvgpu_mc_intr_enable is applicable for older chips hence compile out
under CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA.
Update BUS, CE, ECC, FIFO, MC, PRIV_RING, GR, LTC, FB, PMU units'
doxygen comments based on recent ECC and MC refactoring.
JIRA NVGPU-4439
Change-Id: I337318683d6311b9c2b5748f2fb07dff29a6584f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2252853
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FMON/Clock Mon detects for fault in a particular clock domain.
For this we need to poll a specified master register to know if there
is any fault. If this is set we scan all the available clock domains
to see which domain is faulted and the type of fault.
This CL will have all required common functions to monitor
different clock domains registers.
Bug 2182063
NVGPU-3846
Change-Id: I6a2bdb65335eaeef995eb163d480ee722c230311
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170887
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The devinit executes in parallel with PCIE link training
to reduce exit latency. Therefore, all PCIE settings that
normally occur during devinit after the PCIE link is up are
deferred until nvgpu has resumed control.
Bug 2661545
Change-Id: Ifdd4f645b2e1791d93567cc34d6ab0691a25d101
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210625
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move graphics related defs and functions under CONFIG_NVGPU_GRAPHICS
switch.
Move classes not supported in GV11B under CONFIG_NVGPU_NON_FUSA
switch.
Add missing valid class numbers to gpu_class.is_valid HAL.
Also remove un-used class defs from class.h header.
Lot of qnx safety tests are still using graphics 3d class.
Until those tests got fixed, allowing 3d graphics class
as valid class for safety build.
JIRA NVGPU-4301
Change-Id: Ifd2a13bee3210821799c2bca10e7245eb3c79121
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
