MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. In the case of the gk20a_gr_debug_dump function, it
was always returning 0, so this patch changes the signature to
return void instead.
JIRA NVGPU-3153
Change-Id: I90173ba4e74fe045d9d6a819889d443f8423f34e
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100651
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gfxp_wfi_timeout_count/unit fields were stored in gr_gk20a.ctx_vars
struct so that any user could configure them through sysfs nodes
But the sysfs nodes are legacy and not being actively used by anyone.
Hence delete the sysfs nodes to configure these fields.
Since the gfxp timeout unit/count can now be statically programmed,
make following changes
- remove g->ops.gr.init_gfxp_wfi_timeout_count() hal
- remove g->ops.gr.get_max_gfxp_wfi_timeout_count() hal
- update g->ops.gr.init.preemption_state() hals to configure the values
using macros instead of caller passing the values
- update g->ops.gr.init.gfxp_wfi_timeout() hals to configure the values
using macros instead of caller passing the values
Finally, we don't need to store gfxp_wfi_timeout_count/unit fields
anymore, hence delete them from gr_gk20a.ctx_vars
Jira NVGPU-3112
Change-Id: Idbe5ab3053228dd177aca253545aac36d38ca8ad
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Debug boolean flag dump_ctxsw_stats_on_channel_close is right now stored
in gr_gk20a.ctx_vars struct
This flag logically is property of gr.ctx units since it indicates
whether each context should dump ctxsw stats on channel/context close
Move this flag to struct nvgpu_gr_ctx_desc and remove it from
gr_gk20a.ctx_vars
Expose below API from gr.ctx unit to check if flag is set
nvgpu_gr_ctx_desc_dump_ctxsw_stats_on_channel_close()
Move debugfs creation code to create corresponding debugfs to
gr_gk20a_debugfs_init() and change debugfs type from "u32" to "file"
Struct gr.gr_ctx_desc is created only during first poweron.
Return error if this struct is not available.
Remove unnecessary initialization of this variable from platform
specific probe functions
Jira NVGPU-3112
Change-Id: Id675e047237f82e9b8198a42082e99c95824578f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099399
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Debug boolean flags force_preemption_gfxp and force_preemption_cilp are
right now stored in gr_gk20a.ctx_vars struct
These flags logically are property of gr.ctx units since they indicate
whether each context should be forced to gfxp/cilp preemption mode by
default
Move these flags to struct nvgpu_gr_ctx_desc and remove them from
gr_gk20a.ctx_vars
Expose below APIs from gr.ctx unit to check if flags are set
nvgpu_gr_ctx_desc_force_preemption_gfxp()
nvgpu_gr_ctx_desc_force_preemption_cilp()
Move debugfs creation code to create corresponding debugfs to
gr_gk20a_debugfs_init() and change debugfs type from "u32" to "file"
Struct gr.gr_ctx_desc is created only during first poweron.
Return error if this struct is not available.
Remove unnecessary initialization of these variables from platform
specific probe functions
Jira NVGPU-3112
Change-Id: I8b2de27f0c71dd2ea5abcf94221c2e15c80073ea
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099398
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Unify qnx types unit with posix. Modify certain defines as part of
unification. Modify the fecs trace function mmap_user_buffer to
not have OS specific structure as parameter. Rename the function
pointer mmap_user_buffer as get_mmap_user_buffer_info to reflect the
functionality handled by the function.
Jira NVGPU-2146
Change-Id: I58ec9bf23a435c039d1b5f04194f56067b11aa28
Signed-off-by: ajesh <akv@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2082619
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use API nvgpu_gr_obj_ctx_get/set_golden_image_size() exposed by
gr.obj_ctx unit to get/set size of golden image
Call nvgpu_gr_obj_ctx_init() from vgpu_gr_init_gr_setup_sw() to
initialize golden image size in gr.obj_ctx unit even on vGPU
Move g->ops.gr.falcon.init_ctx_state() call early in
vgpu_gr_init_gr_setup_sw() so that gr.ctx_vars struct is prepared
before fields in it accessed during rest of GR initialization
Jira NVGPU-3112
Change-Id: Ie827ad6f30cc3d931519a1f9a709861d26f8da26
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2096162
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to usermode
- fifo.ring_channel_doorbell -> usermode.ring_doorbell
- fifo.doorbell_token -> usermode.doorbell_token
- fifo.usermode_base -> usermode.base
Created the following HAL
- usermode.setup_hw
Jira NVGPU-2978
Change-Id: I856ea24c126fa22d2f3fe860d4b14087c6d7330b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added new function to add require sw initionaltions. before enabling
gr hw. Added nvgpu_netlist_init_ctx_vars and nvgpu_gr_falcon_init_support
as part of this function:
int nvgpu_gr_prepare_sw(struct gk20a *g)
Moved following structure defs from gr_gk20a.h to gr_falcon.h and
renamed appropriately:
gk20a_ctxsw_ucode_segment -> nvgpu_ctxsw_ucode_segment
gk20a_ctxsw_ucode_segments -> nvgpu_ctxsw_ucode_segments
Moved following struct to gr_falcon_priv.h:
gk20a_ctxsw_ucode_info -> nvgpu_ctxsw_ucode_info
Moved following data from struct gk20a to new structure in gr_falcon_priv.h
struct nvgpu_gr_falcon:
struct nvgpu_mutex ctxsw_disable_lock;
int ctxsw_disable_count;
struct gk20a_ctxsw_ucode_info ctxsw_ucode_info;
Also moved following data from gr_gk20.h to struct nvgpu_gr_falcon:
struct nvgpu_mutex fecs_mutex;
bool skip_ucode_init;
wait_ucode_status
GR_IS_UCODE related enums
eUcodeHandshakeInit enums
Now add a pointer to this new data structure from struct gr_gk20a to
access gr_falcon related data and modified code to reflect this
change:
struct nvgpu_gr_falcon *falcon;
Added following functions to access gr_falcon data:
struct nvgpu_mutex *nvgpu_gr_falcon_get_fecs_mutex(
struct nvgpu_gr_falcon *falcon);
struct nvgpu_ctxsw_ucode_segments *nvgpu_gr_falcon_get_fecs_ucode_segments(
struct nvgpu_gr_falcon *falcon);
struct nvgpu_ctxsw_ucode_segments *nvgpu_gr_falcon_get_gpccs_ucode_segments(
struct nvgpu_gr_falcon *falcon);
void *nvgpu_gr_falcon_get_surface_desc_cpu_va(
struct nvgpu_gr_falcon *falcon);
JIRA NVGPU-1881
Change-Id: I9100891989b0d6b57c49f2bf00ad839a72bc7c7e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2091358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move get_nonpes_aware_tpc hal to hal.gr.init . This hal is
implemented for gv11b.
Update sm_id_numbering hal to pass the gr_config struct pointer
as parameter to avoid dereferencing from gr inside hal.
JIRA NVGPU-2951
Change-Id: I1e06b634cc36741e116e41e581a18c7f5b373945
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093835
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A dGPU can disappear from PCI bus for various reasons. This is
detected while accessing GPU registers and system is rebooted.
If dGPU has disappeared from the system, driver shutdown cannot
access dGPU registers. Skip any such de-initialization (nvlink)
done during shutdown.
Bug 200505461
Change-Id: Ief2e84212421093e57e63ff5958b209bd6857db9
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed and moved from fifo to channel
gk20a_debug_dump_all_channel_status_ramfc -> nvgpu_channel_debug_dump_all
gk20a_dump_channel_status_ramfc -> gk20a_channel_debug_dump
gv11b_dump_channel_status_ramfc -> gv11b_channel_debug_dump
Moved nvgpu_channel_dump_info struct to channel.h
Moved nvgpu_channel_hw_state struct to channel.h
Moved dump_channel_status_ramfc fifo ops to channel ops
as debug_dump
JIRA NVGPU-2978
Change-Id: I696e5029d9e6ca4dc3516651b4d4f5230fe8b0b0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092709
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg:
- tsg.bind_channel
- tsg.unbind_channel
- tsg.unbind_channel_check_hw_state
- tsg.unbind_channel_check_ctx_reload
- tsg.unbind_channel_check_eng_faulted
bind_channel and unbind_channel HALs are optional,
and only implemented for vgpu:
- vgpu_tsg_bind_channel
- vgpu_tsg_unbind_channel
Moved the following code from fifo to tsg:
- nvgpu_tsg_bind_channel
- nvgpu_tsg_unbind_channel
- nvgpu_tsg_unbind_channel_check_hw_state
- nvgpu_tsg_unbind_channel_check_ctx_reload
- gv11b_tsg_unbind_channel_check_eng_faulted
tsg is now explictly passed to bind/unbind operations,
along with ch
Jira NVGPU-2979
Change-Id: I337a3d73ceef5ff320b036b14739ef0e831a28ee
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084029
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api nvgpu_gr_setup_set_preemption_mode() in common.gr.setup to
set various preemption modes
Define new hal g->ops.gr.setup.set_preemption_mode() that calls above
common api
Move corresponding code from gr_gp10b.c to common.gr.setup unit
Jira NVGPU-1886
Change-Id: I7cb0187a4809156e5f90f39727a782b17219afa3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092170
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below apis in common.gr.setup to allocate/free context
nvgpu_gr_setup_alloc_obj_ctx()
nvgpu_gr_setup_free_gr_ctx()
Define two new hals
g->ops.gr.setup.alloc_obj_ctx()
g->ops.gr.setup.free_gr_ctx()
Move corresponding code from gr_gk20a.c to common.gr.setup unit
Jira NVGPU-1886
Change-Id: Icf170a6ed8979afebcedaa98e3df1483437b427b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092169
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Move the perfmon unit source code to common/pmu/perfmon/ folder
- Separate perfmon unit headers under include/nvgpu/pmu/pmu_perfmon.h
- Make a new structure: nvgpu_pmu_perfmon for perfmon unit
- This new struct combines all perfmon unit variables like
perfmon_query, perfmon_ready etc. into one
structure as a part of perfmon unit refactoring.
- Use pmu_perfmon struct to access all perfmon variables.
- Eg: pmu->pmu_perfmon->perfmon_query, pmu->pmu_perfmon->perfmon_ready
and so on.
JIRA NVGPU-1961
Change-Id: I57516c646bfb256004dd7b719e40fafd3c2a09b2
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2080555
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
force_reset_ch obtains a tsg from a channel first before proceeding
with other work. Thus, force_reset_ch is moved as part of tsg unit to
avoid circular dependency between channel and tsg. TSGs can depend on
channels but channel cannot depend on TSGs.
Jira NVGPU-2978
Change-Id: Ib1879681287971d2a4dbeb26ca852d6b59b50f6a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084927
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
a) free_channel_ctx_header is used to free the channel's underlying subctx
and belongs to the hal.channel unit instead of fifo. Moved the same and
renamed the HAL ops to free_ctx_header. The function
gv11b_free_subctx_header is moved to channel_gv11b.* files and also
renamed to gv11b_channel_free_subctx_header.
b) ch_abort_clean_up is moved to hal.channel unit
c) channel_resume and channel_suspend are used to resume and suspend all
the serviceable channels. This belongs to hal.channel unit and are
moved from the hal.fifo unit.
The HAL ops channel_resume and channel_suspend are renamed to
resume_all_serviceable_ch and suspend_all_serviceable_ch respectively.
gk20a_channel_resume and gk20a_channel_suspend are also renamed to
nvgpu_channel_resume_all_serviceable_ch and
nvgpu_channel_suspend_all_serviceable_ch respectively.
d) set_error_notifier HAL ops belongs to hal.channel and is moved
accordingly.
Jira NVGPU-2978
Change-Id: Icb52245cacba3004e2fd32519029a1acff60c23c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083593
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added the following HALs
- ramin.base_shift
- ramin.alloc_base
Use above HALs in mm, instead of using hw definitions.
Defined nvgpu_inst_block_ptr to
- get inst_block address,
- shift if by base_shift
- assert upper 32 bits are 0
- return lower 32 bits
Added missing #include for <nvgpu/mm.h>
Jira NVGPU-3015
Change-Id: I558a6f4c9fbc6873a5b71f1557ea9ad8eae2778f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- delete vgpu_is_reduced_bar1(). Current implementation maps only
that portion of BAR1 that is reserved for guest in case of
reduced BAR1. However this code is obsolete and reduced BAR1
check is always false. Delete related function vgpu_is_reduced_bar1()
and conditional mapping.
- move vgpu_mm_bar1_map_userd() delcaration from vgpu.h
to mm_vgpu.h
- move vgpu_gp10b_init_hal() and vgpu_gv11b_init_hal()
declarations from vgpu.h to new header files
vgpu/gp10b/vgpu_hal_gp10b.h and vgpu/gv11b/vgpu_hal_gv11b.h
respectively.
Jira GVSCI-334
Change-Id: I11a297a0aba1afd8b0ad022169ba7f734bcd952c
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081152
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create vgpu unit init. Move init related functions from
vgpu.c to init_vgpu.c under common/vgpu/init path and
create corresponding header file.
Create vgpu child unit init hal. Move functions
vgpu_init_hal() and vgpu_detect_chip() to a new
file init_hal_vgpu.c under common/vgpu/init path and
create corresponding header file.
Also move os specific hal init vgpu function declaration
vgpu_init_hal_osi() to a new file
include/nvgpu/vgpu/os_init_hal_vgpu.h separating it from
generic vgpu.h
Jira GVSCI-334
Change-Id: I07290e3be5061a2349689228265c8b28ebadab88
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following functions are moved from gr_gk20a.c to common gr_falcon.c
gr_gk20a_disable_ctxsw -> nvgpu_gr_falcon_disable_ctxsw
gr_gk20a_enable_ctxsw -> nvgpu_gr_falcon_enable_ctxsw
gr_gk20a_halt_pipe -> nvgpu_gr_falcon_halt_pipe
Added new gr falcon hal to control ctxsw:
int gm20b_gr_falcon_ctrl_ctxsw(struct gk20a *g, u32 fecs_method,
u32 data, u32 *ret_val)
Parameters:
fecs_method: will be specified by a generic define provided in gr_falcon.h
header.
data: input data parameter (if any), set it to zero, if method did not
require any data input.
ret_val: pointer to expected output.
Added following ops for gr falcon:
int (*halt_pipe)(struct gk20a *g); -> this is moved from gr
int (*disable_ctxsw)(struct gk20a *g);
int (*enable_ctxsw)(struct gk20a *g);
JIRA NVGPU-1881
Change-Id: Idb3b7355b5a0bd3b9bb01f9f424c5d607616f540
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081308
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new unit common.gr.obj_ctx which allocates and initializes GR
context. This unit also takes care of creating global golden image
used to initialize every context.
Add private header obj_ctx_priv.h that defines struct
nvgpu_gr_obj_ctx_golden_image
Add public header obj_ctx.h that exposes functions supported by new unit
This unit now exposes below API to allocate and initialize context
nvgpu_gr_obj_ctx_alloc()
Remove below functions from gk20a/gr_gk20a.c and move them to new unit
with below renames
gr_gk20a_fecs_ctx_bind_channel() -> nvgpu_gr_obj_ctx_bind_channel()
gr_gk20a_fecs_ctx_image_save() -> nvgpu_gr_obj_ctx_image_save()
gk20a_init_sw_bundle() -> nvgpu_gr_obj_ctx_alloc_sw_bundle()
gr_gk20a_alloc_gr_ctx() -> nvgpu_gr_obj_ctx_gr_ctx_alloc()
gr_gk20a_init_golden_ctx_image() ->
nvgpu_gr_obj_ctx_alloc_golden_ctx_image()
Use new APIs in gk20a_alloc_obj_ctx() to allocate context
For now this unit includes <nvgpu/gr/gr.h> and some h/w headers.
But they will be removed in follow up patches
Jira NVGPU-1887
Change-Id: Ib95ec1c19c5b74810f85c2feed8fdd63889d3d22
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087662
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The exec_regops() API was using a u64 for the num_ops parameter. The
lower level APIs used by exec_regops() expect u32s for this value.
Update the interface to use u32.
This eliminates MISRA Rule 10.3 violations for assignment of objects of
different essential or narrower types.
JIRA: NVGPU-3023
Change-Id: I5a2a22916f81d8b3d882d224d07eedffcde1e3ee
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084207
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common.gr.setup that provides runtime setup interfaces to
other units outside of GR unit or to OS-specific code
Move zcull setup call to this unit.
New unit now exposes nvgpu_gr_setup_bind_ctxsw_zcull() to setup zcull
This API internally calls common.gr.zcull API nvgpu_gr_zcull_ctx_setup()
Add new hal g->ops.gr.setup.bind_ctxsw_zcull() and remove
g->ops.gr.zcull.bind_ctxsw_zcull()
Remove nvgpu_channel_gr_zcull_setup() from channel unit
Also remove ctx/subctx header includes sicne channel code need not
configure zcull
Remove gm20b_gr_bind_ctxsw_zcull() since binding is done from common
code
Jira NVGPU-1886
Change-Id: I6f04d19a8b8c003734702c5f6780a03ffc89b717
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2086602
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved enable/disable HALs from fifo to tsg:
- tsg.enable
- tsg.disable
gk20a_tsg_enable and gv11b_tsg_enable are moved to HAL,
since they are chip specific, even though they do not
directly access chip registers.
Removed vgpu_gv11b_tsg_enable as it was identical to
gv11b_tsg_enable.
Changed gv11b_fifo_locked_abort_runlist_active_tsgs and
gv11b_fifo_teardown_ch_tsg to use tsg.enable HAL instead
of calling directly gk20a_disable_tsg HAL implementation.
Jira NVGPU-2979
Change-Id: I721650c64dcf8cd158652e362292af45df43819f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083156
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Description:
nvgpu_clk_pmupstate is the global structure in clk units. It is declared
in clk.h and all clk units will include clk.h header.
nvgpu_clk_pmupstate struct will have structure pointers to all clk units
and will include genereic function pointers which are used by most clk
units. The reason why the function pointers is defined in this sturct,
and not included inside g->ops is because, these are only clk specific
functions and rest of the driver code is not dependent on this.
Each unit will have init function to allocate memory for its structure
and will initialize its local functions.
Changes:
1) Introduced nvgpu_clk_pmupstate in clk.h file. All the changes needed
to call the above struct from individual clk units.
2) Removed cyclic dependency headers in clk units by calling function
through pointers defined in clk.h.
3) Initialization of each unit is done in respective unit instead of
doing it in clk unit. Added *_init_pmupstate and *_free_pmupstate to
individual clk units.
4) Each unit clean up will be done separately while refactoring that
unit.
NVGPU-1963
NVGPU-2965
Change-Id: Iee79d7a812b62407252636057b104f952c94a229
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033537
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
