To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute
on different hardware resources.
This feature requires a change in software to make it possible
to modify the virtual SM id to TPC mapping across mission and
redundant contexts.
This CL adds only SM diversity flags which are exposed to
its clients through ioctl/devctl interfaces.
Actual virtual SM id to TPC mapping implementation
will be part of upcoming patch sets.
Added NvGpu CFLAGS to identify the safety build
"CONFIG_NVGPU_BUILD_CONFIGURATION_IS_SAFETY"
JIRA NVGPU-4133
Change-Id: I5a18256780e6726e399e39c1c8d155d2ef07d7bd
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2250461
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_mc_log_pending_intrs is debugging related function hence compile
out that and related functionality under CONFIG_NVGPU_NON_FUSA.
nvgpu_mc_intr_enable is applicable for older chips hence compile out
under CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA.
Update BUS, CE, ECC, FIFO, MC, PRIV_RING, GR, LTC, FB, PMU units'
doxygen comments based on recent ECC and MC refactoring.
JIRA NVGPU-4439
Change-Id: I337318683d6311b9c2b5748f2fb07dff29a6584f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2252853
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FMON/Clock Mon detects for fault in a particular clock domain.
For this we need to poll a specified master register to know if there
is any fault. If this is set we scan all the available clock domains
to see which domain is faulted and the type of fault.
This CL will have all required common functions to monitor
different clock domains registers.
Bug 2182063
NVGPU-3846
Change-Id: I6a2bdb65335eaeef995eb163d480ee722c230311
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170887
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The devinit executes in parallel with PCIE link training
to reduce exit latency. Therefore, all PCIE settings that
normally occur during devinit after the PCIE link is up are
deferred until nvgpu has resumed control.
Bug 2661545
Change-Id: Ifdd4f645b2e1791d93567cc34d6ab0691a25d101
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210625
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move graphics related defs and functions under CONFIG_NVGPU_GRAPHICS
switch.
Move classes not supported in GV11B under CONFIG_NVGPU_NON_FUSA
switch.
Add missing valid class numbers to gpu_class.is_valid HAL.
Also remove un-used class defs from class.h header.
Lot of qnx safety tests are still using graphics 3d class.
Until those tests got fixed, allowing 3d graphics class
as valid class for safety build.
JIRA NVGPU-4301
Change-Id: Ifd2a13bee3210821799c2bca10e7245eb3c79121
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved mmu replayable fault related code under CONFIG_NVGPU_REPLAYABLE_FAULT
switch, so that it will be compiled out for safety build.
Following hals and their related code also moved under
CONFIG_NVGPU_REPLAYABLE_FAULT switch:
void (*handle_replayable_fault)(struct gk20a *g);
int (*mmu_invalidate_replay)(struct gk20a *g, u32 invalidate_replay_val);
JIRA NVGPU-4302
Change-Id: I191ee0c181b276a04bc1531488862380af81a5c9
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2227176
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently nvgpu reads the temperature by reading the
NV_THERM_I2CS_SENSOR_00 register. Below are the issues
with current approach
1) NV_THERM_I2CS_SENSOR_00 doesn't support
fractional precision which is POR.
2) It doesn't support negative temperatures which
is required for Auto.
3) It doesn't take into account the right POR
sensor in VFE VBIOS tables.
From therm channel get status interface we can read the
current temperature from PMU.
NVBUG - 200549047
Change-Id: I2fb21926208876f3d3bebe3f2dee08edafedbc7d
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196224
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add doxygen support to following functions.
- gr_prepare_sw
- gr_enable_hw
- gr_init_support
- gr_suspend
In ecc subunit
- ecc_init_support
- ecc_remove_support
- detect
In setup subunit
- alloc_obj_ctx
- free_gr_ctx
- free_subctx
- set_preemption_mode
In falcon subunit
- read_fecs_ctxsw_mailbox
- dump_stats
- get_fecs_ctx_state_store_major_rev_id
- bind_instblk
- ctrl_ctxsw
In intr subunit
- nonstall_isr
- stall_isr
- flush_channel_tlb
In init subunit
- get_no_of_sm
- get_nonpes_aware_tpc
- wait_initialized
- fifo_access
- get_max_subctx_count
- detect_sm_arch
- get_supported__preemption_modes
- get_default_preemption_modes
Identified the hal ops not being called from outside
units. Placed those hals under @cond ... @endcond comments.
Each gr subunit structure definition is taken outside the
main gops_gr structure definition. This helps to give a
well structured doxygen document.
Removed unused gr.falcon hals for
submit_fecs_method_op
submit_fecs_sideband_method_op
Update doxygen comments for nvgpu_gr_enable_hw and
nvgpu_gr_intr_stall_isr functions.
Jira NVGPU-4107
Change-Id: I56a74ef07bcc21752a06e3a4f55442894bb9109f
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2214511
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add checking for unused non safety code in the
gr interrupt unit.
Add #ifdef CONFIG_NVGPU_HAL_NON_FUSA checking for
gm20b_gr_intr_tpc_exception_sm_enable function which is not being
called in safety code.
Add #ifdef CONFIG_NVGPU_DEBUGGER checking for
gm20b_gr_intr_tpc_exception_sm_disable function which is needed
with debugger enable.
Jira NVGPU-4085
Change-Id: Ie721505cdfced5b6b0443624d6e7cca2a0d4a19a
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2208918
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the gv11b reglist hal with updated generator. It includes the
following changes:
1. update gr and ltc function names for consistent naming.
2. s/gv11b_blcg_ctxsw_prog/gv11b_blcg_ctxsw_firmware for consistent
naming.
3. fixed alignment issues.
JIRA NVGPU-2175
Change-Id: I6c4c0f241eda18fd732dc4664010403c489178bf
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2173826
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GR tick frequency needs to be set to MAX value for profiler
use cases for gp10b/gv11b/tu104 chips.
Add new HAL g->ops.ptimer.config_gr_tick_freq() that configures GR
tick frequency to MAX value and call this HAL in GPU poweron path.
This support is not needed in safety build, so compile everything
only if CONFIG_NVGPU_DEBUGGER is enabled
Bug 200289214
Change-Id: Id8378540cc67ca0041b56990f8676e3a105403a5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195163
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.init.get_access_map() returns whitelist of register addresses
that can be accessed by SET_FALCON methods when added into pushbuffer.
SET_FALCON method does not need to be supported in safety.
Hence install an empty register access map in safety build by adding
a new flag CONFIG_NVGPU_SET_FALCON_ACCESS_MAP.
Compile out g->ops.gr.init.get_access_map() and code that writes
whitelist in access map buffer.
Note that we still need to configure base address of access map in
context image even for safety.
Jira NVGPU-3995
Bug 2686235
Change-Id: I111b46f96821a09929aff32fcba5bb2215c81b9a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2185469
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following violations are fixed in this patch
a) misra_c_2012_rule_2_1_violation: This code cannot be reached: "return
err;".
b) misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_preempt_channel(g, ch)" which returns error information without
testing the error information.
c) misra_c_2012_rule_8_6_violation: "" is declared but never defined for
following functions
1) gm20b_dump_engine_status
2) gp10b_ramfc_setup
3) gp10b_ramfc_get_syncpt
4) gp10b_ramfc_set_syncpt
5) gk20a_fifo_intr_0_enable
6) gk20a_fifo_intr_0_isr
7) gk20a_fifo_handle_sched_error
8) gk20a_fifo_is_mmu_fault_pending
9) gk20a_fifo_intr_set_recover_mask
10) gk20a_fifo_intr_unset_recover_mask
11) gk20a_init_fifo_reset_enable_hw
12) gk20a_init_fifo_setup_hw
13) nvgpu_tsg_set_runlist_interleave
14) gm20b_dump_engine_status
15) gp10b_pbdma_channel_fatal_0_intr_descs
16) gp10b_pbdma_allowed_syncpoints_0_index_f
17) gp10b_pbdma_allowed_syncpoints_0_valid_f
18) gp10b_pbdma_allowed_syncpoints_0_index_v
19) gk20a_runlist_reschedule
The above functions declarations are now embedded within
CONFIG_NVGPU_HAL_NON_FUSA
d) The function nvgpu_channel_abort_clean_up has a UMD version and hence
its taken out of CONFIG_NVGPU_KERNEL_MODE_SUBMIT to avoid errors of
type c above.
Jira NVGPU-3881
Change-Id: I5f85c7070e1d2f0b18d14db07ce22a01c29f0e40
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2181032
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change the directly called init functions to function pointers in the
HAL. This makes it more consistent. This also allows for writing more
comprehensive unit tests for nvgpu.common.init.
JIRA NVGPU-2239
Change-Id: I05d739a8f8a2e7d385322d93154206eb0bfddc10
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2173920
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In GV11B, read fuse_status_opt_tpc_gpc register
to read which TPCs are floorswept.
- The driver will also read sysfs node: tpc_pg_mask
- Based on these two values "can_tpc_powergate" will
be set to true or false and mask will be used to write to
fuse_ctrl_opt_tpc_gpc register to powergate the TPC.
- can_tpc_powergate = true indicates that the mask value
sent from userspace is valid and can be used to power gate
the desired TPC
- can_tpc_powergate = false indicates that the mask value
sent from userspace is not valid and cannot be used to
power gate the desired TPC.
Bug 200532639
Change-Id: Ib0806e4c96305a13b3574e8063ad8e16770aa7cd
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added following gr init related gv11b hal for safety golden context
creation:
void gv11b_gr_init_restore_stats_counter_bundle_data(struct gk20a *g,
struct netlist_av_list *sw_bundle_init);
int gv11b_gr_init_load_sw_bundle_init(struct gk20a *g,
struct netlist_av_list *sw_bundle_init);
gv11b_gr_init_restore_stats_counter_bundle_data implements functionality
required to re-store stats bundle data, to avoid fe and mme mismatch.
gv11b_gr_init_load_sw_bundle_init implements functionality required for
disable stats idle clock counter to avoid mismatches
with two golden context saves.
JIRA NVGPU-3558
Change-Id: I73886770dac30934cbd3989b19ba87553286453d
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2167211
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add CONFIG_NVGPU_RECOVERY in order to conditionally compile
recovery code. This code will be removed from safety build
when sw quiesce state is implemented, and negative tests are
disabled or modified such that they do not expect recovery
to happen.
Added static inline functions for recovery handlers, when
CONFIG_NVGPU_RECOVERY is not defined. These inline functions
can later be wired to the sw quiesce functions.
Also moved gv11b recovery code to non-fusa, as it will ultimately
be removed from safety build.
Jira NVGPU-3871
Change-Id: Ia705b059fab6120899c7e15082f2a0f51ff51dc9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166074
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved non-secure gr falcon boot related code to non-functional safety file.
Also added HAL initialization related to these functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag.
JIRA NVGPU-3741
Change-Id: I72fb92c04dc6e76c338e9a0e0cd86b12109ce284
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158936
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compile-out non-secure gr falcon boot related code for safety build by
adding non-secure gr falcon related code under following flag:
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT
Added nvgpu_gr_falcon_load_ctxsw_ucode and related functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag and enabled this flag only
for non-safety builds.
JIRA NVGPU-3741
Change-Id: I817d8a7be6a675eee514faf7bb93f1382c6da5ce
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158935
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
