Fixed following Coverity Defects:
ioctl_as.c : Bad bit shift operation
mc_tu104.c : Bad bit shift operation
vm.c : Bad bit shift operation
vm_remap.c : Bad bit shift operation
A new linux header file for ilog2 is created.
The files which used the old ilog2 function
have been changed to use the new nvgpu_ilog2
function.
CID 9847922
CID 9869507
CID 9859508
CID 10112314
CID 10127813
CID 10127899
CID 10128004
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: Ia201eea7cc426c3d6581e1e5ae3b882dbab3b490
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2700994
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
a. LAUNCH_ERR
- Userspace error.
- Triggered due to faulty launch.
- Handle using recovery to reset CE engine and teardown the
faulty channel.
b. An INVALID_CONFIG -
- Triggered when LCE is mapped to floorswept PCE.
- On iGPU, we use the default PCE 2 LCE HW mapping.
The default mapping can be read from NV_CE_PCE2LCE_CONFIG
INIT value in CE refmanual.
- NvGPU driver configures the mapping on dGPUs (currently only on
Turing).
- So, this interrupt can only be triggered if there is
kernel or HW error
- Recovery ( which is killing the context + engine reset) will
not help resolve this error.
- Trigger Quiesce as part of handling.
c. A MTHD_BUFFER_FAULT -
- NvGPU driver allocates fault buffers for all TSGs or contexts,
maps them in BAR2 VA space and writes the VA into channel
instance block.
- Can be triggered only due to kernel bug
- Recovery will not help, need quiesce
d. FBUF_CRC_FAIL
- Triggered when the CRC entry read from the method fault buffer
does not match the computed CRC from the methods contained in
the buffer.
- This indicates memory corruption and is a fatal interrupt which
at least requires the LCE to be reset before operations can
start again, if not the entire GPU.
- Better to quiesce on memory corruption
CE Engine reset (via recovery) will not help.
e. FBUF_MAGIC_CHK_FAIL
- Triggered when the MAGIC_NUM entry read from the method fault
buf does not match NV_CE_MTHD_BUFFER_GLOBAL_HDR_MAGIC_NUM_VAL
- This indicates memory corruption and is a fatal interrupt
- Better to quiesce on memory corruption
f. STALLING_DEBUG
- Only triggered with SW write for debug purposes
- Debug interrupt, currently ignored
Move launch error handling from GP10b to GV11b HAL as -
1. LAUNCHERR_REPORT errcode METHOD_BUFFER_ACCESS_FAULT is not
defined on Pascal
2. We do not support GP10b on dev-main ToT
JIRA NVGPU-8102
Change-Id: Idc84119bc23b5e85f3479fe62cc8720e98b627a5
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2678893
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below CE interrupts do not have any users(usecases) on safety build;
disable them only on safety build.
1. BLOCKPIPE stall intr: Not used by GFX(VKSC) and CUDA on safety.
2. NONBLOCK_PIPE nonstall intr: Non-stall intrs are not supported
on safety build. Also, this one is not used by GFX(VKSC)
and CUDA.
3. STALLING_DEBUG intr: Added in Orin tree. It is only needed for
debugging. Disable on safety build as there is no current
usage in driver.
4. POISON_ERROR intr: Poison is a fault containment and not
supported on GA10b.
5. INVALID_CONFIG intr: Floor sweeping not supported on functional
safety SKU.
Bug 3548082
Change-Id: I8d97ccb38f138b2c04a780e1c255a64d28723405
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671927
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated gsp unit into three unit:
- GSP unit which holds the core functionality of GSP RISCV core,
bootstrap, interrupt, etc.
- GSP Scheduler to hold the cmd/msg management, IPC, etc.
- GSP Test to hold stress test ucode specific support.
NVGPU-7492
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I12340dc776d610502f28c8574843afc7481c0871
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660619
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
With the existing implemenatation ELPG was disabled and
enabled once for handling stall isr and then again ELPG is
disabled and aenabled for writing to gr retrigger register.
This increased number of ELPG cycles and degraded perf of various
graphics test with ELPG enabled.
This change now disables ELPG, then handles stall_isr and
write to gr retrigger register and then enables ELPG.
Thus, number of ELPG cycles are reduced.
Bug 3451615
Change-Id: Iadac0c7b01eb711878280cd1503ba0f26000937c
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2638175
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below sequence leads to the condition where nvgpu logs error
about spurious stall intr occurence:
1. PMU interrupt is set after ELPG command is sent to PMU.
2. Stalling irqhandler sees the interrupt and schedules
the stalling thread.
3. PMU isr gets executed from nvgpu_pmu_wait_fw_ack_status
just before the stalling irq thread is run. Due to this,
top level interrupt gets cleared.
4. When stalling irq thread gets executed it sees no
interrupt and logs as spurious interrupt.
This condition is not actually about "spurious interrupt",
hence change error log to gpu_dbg_intr log type and
rephrase it.
Bug 200780211
Change-Id: Idab62f61007012f7022a836473562795c24821ef
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2628275
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Accessing any PGRAPH registers in GR intr retrigger
ISR routine when ELPG is engaged causes idle snap.
- This idle snap is caught when nvgpu_submit_illegal_class
test is run.
- To avoid access to PGRAPH registers when ELPG is engaged
add elpg protected call for GR intr retrigger and CE ISR
and retrigger HALs
Bug 200777033
Change-Id: Ieef4a423faf79f09476d696c3078b113750548bb
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2586449
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu does not support nested interrupts and as a result priv/pbus
interrupt do not reach cpu while other interrupts on intr_0 (stall)
tree are being processed. This issue is not specific to priv/pbus
but since pbus errors are critical, it is important to detect it
early on.
Below is the snippet from one of the failing logs where nvgpu
is doing recovery to process gr interrupt.
Right after GR engine is reset (PGRAPH of PMC_ENABLE), failing priv
accesses should have triggered pbus interrupt but it does not reach cpu
until gr interrupt is handled. Any interrupt that requires recovery will
take longer to finish isr as recovery is done as part of isr.
Also intr_0 (stall) interrupts are paused while stall interrupt is being
processed.
gm20b_gr_falcon_bind_instblk:147 [ERR] arbiter idle timeout, status: badf1020
gm20b_gr_falcon_wait_for_fecs_arb_idle:125 [ERR] arbiter idle timeout, fecs ctxsw status: 0xbadf1020
Fix to detect pbus intr while other stall interrupts are being processed
is to move pbus intr enable/disable/clear/handle to nonstall (intr_1)
tree. Configure pbus_intr_en_1 to route pbus to nostall tree.
Priv interrupts cannot be moved to nonstall (intr_1) tree due
to h/w not supporting this.
In Turing, moving pbus intr to nonstall is not feasible as mc_intr(1)
tree is deprecated. Add Turing specific stall intr handler hals with
original logic to route pbus intr to mc_intr(0).
JIRA NVGPU-25
Bug 200603566
Change-Id: I36fc376800802f20a0ea581b4f787bcc6c73ec7e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354192
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Enable build flags for dGPU in safety, when
NVGPU_FORCE_DGPU_SAFETY_PROFILE is set.
Use libnvgpu-dgpu_safe.exports for dGPU safety build.
Add build flags for tu104 HAL initialization (to solve
undefined symbols in safety build).
Temporarily add non-fusa files needed to build dGPU in safety.
related functions will have to move to fusa files.
Jira NVGPU-4611
Change-Id: I41db0c039c7f15d9191cdb811b4906e779d5cc88
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2310276
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Address following issues uncovered during inspection:
1. Remove the doxygen comment from nvgpu_wait_for_deferred_interrupts
definition.
2. Use NVGPU_MC_INTR_STALLING instead of hardcoding the index.
3. Define doxygen groups NVGPU_MC_UNIT_ENUMS,
NVGPU_MC_INTR_TYPE_DEFINES, NVGPU_MC_INTR_UNIT_DEFINES and
NVGPU_MC_INTR_ENABLE_DEFINES.
4. Update the doxygen comments.
5. Fix the cleanup, typo in the description of the test
test_wait_for_deferred_interrupts.
JIRA NVGPU-4795
Change-Id: Ifc6756832aabf9dd42ee174eb1373495e6d38c86
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287627
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Rule 2.5 states that a project should not contain unused
macro declarations.
While most of the violations in the nvgpu driver are due to unused
macros from hw headers, devinit-related headers, etc. there is a small
number that are due to things like:
* macros not being used when they could/should be
* macros in C files that are really not referenced
* CPP build flag mismatches
This change eliminates such violations from the following:
* replace constants with existing macros in timeout conversion code
* wrap nvgpu_gmmu_dbg macro #defines in #ifdef CONFIG_NVGPU_TRACE/#endif
* wrap MAX_MC_INTR_REGS #define in #ifdef CONFIG_NVGPU_NON_FUSA/#endif
* remove unused FECS_MAILBOX_0_ACK_RESTORE from runlist code
* wrap BACKTRACE_MAXSIZE macro with #ifndef _QNX_SOURCE/#endif
Jira NVGPU-3178
Change-Id: I2bc72f706d7af3f8e7b062126e8543d0dc8ac250
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284419
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Cleanup issues with traceability for common.mc:
- Move these declarations under macros or @cond as they are either
non-fusa or private functions to the unit:
- gm20b_mc_is_enabled
- mc_gp10b_log_pending_intrs
- mc_gp10b_ltc_isr
- gv11b_mc_is_intr_hub_pending
- Fix typo in SWUTS for gv11b_mc_is_stall_and_eng_intr_pending
JIRA NVGPU-4818
Change-Id: I53a332627772e4d793430159ac1924c8f9ce8c1c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2280640
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compile out the function mc_gp10b_log_pending_intrs() with the
CONFIG_NVGPU_NON_FUSA macro since it isn't used in the FUSA build.
JIRA NVGPU-2224
Change-Id: I5b2d465142be7d1bddf114c7374ced7b297c33d0
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2257127
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rule 8.6 requires each identifier with external linkage to have exactly
one external definitions.
Rule 10.x necessitates operands to have essential type; left and right
operands should be of same width and type.
Rule 17.7 requires function return value to be checked for error
information.
This patch fixes above mentioned errors in nvgpu.hal.mc.
Jira NVGPU-3855
Change-Id: I5440392de5d55dc98ed2002273af8a44a596cd3a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2162145
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
