Move the nvlink HAL code to unit specific directory as part
of nvgpu restructing.
This move is done after removing usage of other unit's hardware
headers from nvlink. Also confirmed that no other unit files are
including nvlink hardware headers.
JIRA NVGPU-966
Change-Id: I301e3f8de37c5792a3e1e799b97e5fdfc131f058
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975259
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the fifo code to use the HALs exposed by "Top" unit to
read data from device_info table.
The information for GRAPHICS engine in device_info table is
now parsed using the get_device_info HAL from "Top" unit.
Copy engine(CE) has multiple entries in the device_info table
corresponding to each instance of the engine. Prior to Pascal, each
instance of an engine was denoted by different engine type.
For example in GM20B, there are engine types like COPY_ENGINE0,
COPY_ENGINE1 and so on. In Pascal and chips beyond, a new field
called "inst_id" is added and the engine_type is kept the same for
different instances of an engine. For example in GP10B, all copy
engine entries have same engine type i.e ENGINE_LCE, but different
inst_ids. So for Pascal and chips beyond, we use a different HAL to
get CE information from device_info table.
JIRA NVGPU-1053
Change-Id: Ib40a616d903a5dbef5730678c2ebc3454b8e900d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969400
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The device_info table is an array of registers which contain engine
specific data for engines like CE, graphics, nvdec, ioctrl etc.
These registers contain data like intr_enum, reset_enum, pri_base
and so on. The Top unit would include HAL to parse this table and
get data for a particular engine.
Some engines like CE have multiple entries in the device_info table
corresponding to each instance of the engine. Prior to Pascal, each
instance of an engine was denoted by different engine type.
For example in GM20B, there are engine types like COPY_ENGINE0,
COPY_ENGINE1 and so on. In Pascal and chips beyond, a new field
called "inst_id" is added and the engine_type is kept the same.
For example in GP10B, all copy engine entries have same engine type
i.e ENGINE_LCE, but different inst_ids. So for Pascal and chips
beyond, add HAL to get number of entries corresponding to an engine
type.The "get_device_info" HAL will parse a specific instance
of the engine using inst_id argument
JIRA NVGPU-1053
Change-Id: Ie3058b1c1bfdd87bfa47e5f037d049d9d50cfc0b
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969399
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Follow-up change to rename g->ops.mm.bar1_map (and implementations)
to more specific g->ops.mm.bar1_map_userd.
Also use nvgpu_big_zalloc() to allocate userd slabs memory descriptors.
Bug 2422486
Bug 200474793
Change-Id: Iceff3bd1d34d56d3bb9496c179fff1b876b224ce
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970891
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any tsg specific functions that does high-level software-centric
operations below to the TSG unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/tsg.c and also rename them to use the
prefix nvgpu_tsg_*
gk20a_fifo_set_ctx_mmu_error_tsg
gk20a_fifo_abort_tsg
gk20a_fifo_error_tsg
gk20a_fifo_check_tsg_ctxsw_timeout
Jira NVGPU-1237
Change-Id: I4e3da821a878d4b4a0a0b53fbb7f4c10f135f58d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1934299
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any channel specific functions having high-level software-centric
operations belong to the channel unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/channel.c. Also, rename the functions
to use the prefix nvgpu_channel_*.
gk20a_fifo_set_ctx_mmu_error_ch
gk20a_fifo_error_ch
gk20a_fifo_check_ch_ctxsw_timeout
Jira NVGPU-1237
Change-Id: Id6b6d69bbed193befbfc4c30ecda1b600d846199
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The function gk20a_fifo_sched_disable_rw accesses HW directly. Rename it
and add a HAL indirection so that it can be called from chip-independent
code.
Also fix some trivial MISRA violations in the function.
Jira NVGPU-1309
Change-Id: Icf320738d3d1d4baa40257a9da3ca2c6b7fefc0b
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1971274
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.alloc_gr_ctx HAL right now allocates graphics context and
also initializes preemption mode for various platforms
Separate out a new HAL g->ops.gr.init_ctxsw_preemption_mode that
initializes preemption mode and call it from gk20a_alloc_obj_ctx()
after context is created
g->ops.gr.alloc_gr_ctx now only allocates the context as the name
suggests
Jira NVGPU-1527
Change-Id: I8a44672d5ab2ebfe315e6334115265e4ee4f24f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972254
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.enable_cde_in_fecs and g->ops.gr.update_boosted_ctx
are no longer required since we can directly call
g->ops.gr.ctxsw_prog.set_cde_enabled and
g->ops.gr.ctxsw_prog.set_pmu_options_boost_clock_frequencies
respectively
remove those functions and the ops
Jira NVGPU-1526
Change-Id: Idb0ad5f634e78aac44ec325ba2b7f59c612b29e8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972184
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GSPLITE falcon base address was being set without invoking hal api.
This patch defines gpu_ops.gsp.falcon_base_addr hal api to get this
base address.
JIRA NVGPU-1587
Change-Id: Id187b34d022f90c09b8762cdab7769323b607cc0
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969432
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPCCS falcon base address was being set without invoking hal api. Remove
FALCON_GPCCS_BASE. This patch defines gpu_ops.gr.gpccs_falcon_base_addr
hal api to get this base address.
JIRA NVGPU-1587
Change-Id: Icfa7a26d1bb2d67c81f05a43f6ce906f59706b3d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969431
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FECS falcon base address was being set without invoking hal api. Remove
FALCON_FECS_BASE. This patch defines gpu_ops.gr.fecs_falcon_base_addr hal
api to get this base address.
JIRA NVGPU-1587
Change-Id: I9c8e60be4ee81a154020c982893725a12ebb72ef
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969430
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
SEC2 falcon base address was being set without invoking hal api. Remove
FALCON_SEC_BASE. This patch defines gpu_ops.sec2.falcon_base_addr hal api
to get this base address.
Also, don't initialize the base for non-supported falcons.
JIRA NVGPU-1587
Change-Id: Iad19a9987416076cf9090d30a48ff83369cf73c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969429
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU falcon base address was being set without invoking hal api. Remove
FALCON_PWR_BASE. This patch defines gpu_ops.pmu.falcon_base_addr hal api
to get this base address.
JIRA NVGPU-1587
Change-Id: I5c3f27e89bdcc775025bc8d4fa9cf0af11ceb002
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969428
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
NVDEC falcon base address was being set without invoking hal api. Remove
FALCON_NVDEC_BASE. This patch defines gpu_ops.fb.falcon_base_addr hal api
to get this base address. Currently gp106 and tu104 have these
implemented. gv100 uses the gp106 hal interface.
Also, don't initialize the base for non-supported falcons.
JIRA NVGPU-1587
Change-Id: I0be759b8462ede9b85690a70431480afdee9602c
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969427
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU counters #0 and #4 are used to count total cycles and busy cycles.
These counts are used by podgov to estimate GPU load.
PMU idle intr status register is used to monitor overflow. Overflow
rarely occurs because frequency governor reads and resets the counters
at a high cadence. When overflow occurs, 100% work load is reported to
frequency governor.
Bug 1963732
Change-Id: I046480ebde162e6eda24577932b96cfd91b77c69
Signed-off-by: Peng Liu <pengliu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1939547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We had to force allocation of physically contiguous memory for
USERD in nvlink case, as a channel's USERD address is computed as
an offset from fifo->userd address, and nvlink bypasses SMMU.
With 4096 channels, it can become difficult to allocate 2MB of
physically contiguous sysmem for USERD on a busy system.
PBDMA does not require any sort of packing or contiguous USERD
allocation, as each channel has a direct pointer to that channel's
512B USERD region. When BAR1 is supported we only need the GPU VAs
to be contiguous, to setup the BAR1 inst block.
- Add slab allocator for USERD.
- Slabs are allocated in SYSMEM, using PAGE_SIZE for slab size.
- Contiguous channels share the same page (16 channels per slab).
- ch->userd_mem points to related nvgpu_mem descriptor
- ch->userd_offset is the offset from the beginning of the slab
- Pre-allocate GPU VAs for the whole BAR1
- Add g->ops.mm.bar1_map() method
- gk20a_mm_bar1_map() uses fixed mapping in BAR1 region
- vgpu_mm_bar1_map() passes the offset in TEGRA_VGPU_CMD_MAP_BAR1
- TEGRA_VGPU_CMD_MAP_BAR1 is called for each slab.
Bug 2422486
Bug 200474793
Change-Id: I202699fe55a454c1fc6d969e7b6196a46256d704
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate new unit gr/ctxsw_prog that provides interface to access
h/w header files hw_ctxsw_prog_*.h
Add below chip specific files that access above h/w unit and provide
interface through g->ops.gr.ctxsw_prog.*() HAL for rest of the units
common/gr/ctxsw_prog/ctxsw_prog_gm20b.c
common/gr/ctxsw_prog/ctxsw_prog_gp10b.c
common/gr/ctxsw_prog/ctxsw_prog_gv11b.c
Remove all the h/w header includes from rest of the units and code.
Remove direct calls to h/w headers ctxsw_prog_*() and use HALs
g->ops.gr.ctxsw_prog.*() instead
In gr_gk20a_find_priv_offset_in_ext_buffer(), h/w header
ctxsw_prog_extended_num_smpc_quadrants_v() is only defined on gk20a
And since we don't support gk20a remove corresponding code
Add missing h/w header ctxsw_prog_main_image_pm_mode_ctxsw_f() for
some chips
Add new h/w header ctxsw_prog_gpccs_header_stride_v()
Jira NVGPU-1526
Change-Id: I170f5c0da26ada833f94f5479ff299c0db56a732
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1966111
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.1 states that operands shall not be of an
inappropriate essential type.
For example, the use of bitwise OR on signed values is not
permitted.
This patch restructures return status assignment in the
gr_tu104_init_sw_bundle64() routine to eliminate the use
of bitwise OR when constructing the return value.
Rather than continue to attempt to submit bundles after an
idle failure the routine instead now returns immediately on
the first error.
This seems like a reasonable/better approach given the contents
of the context buffer are in a questionable state after the
first error anyway and the client that issued ALLOC_OBJ_CTX will
continue to properly see the error.
Also, this patch changes the type of the return variable
('err') from u32 to int to match the function prototype.
JIRA NVGPU-650
Change-Id: I2aae0f85d0373ddf95b5899ce8c452352c6aa670
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1965496
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.4 only allows the usage of arithmetic operations on
operands of the same essential type category.
Adding "U" at the end of the integer literals to have same type of
operands when an arithmetic operation is performed.
This fixes violations where an arithmetic operation is performed on
signed and unsigned int types.
JIRA NVGPU-992
Change-Id: I3b725e60f1908a4b3a308736d02600f86929cdd3
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1958306
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out the code to check which engines on a particular runlist are
busy from gk20a_fifo_runlist_reset_engines() and make it a HAL op.
Resetting engines is common across chips but status is read from
registers.
Jira NVGPU-1309
Change-Id: I7a63a2942a9e210481822eaf85795fc17dad0dc5
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1961822
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Updated PMU version number to sync with
p4 cl #:25133717
-As LS falcon's bootstrap is taken care by SEC2 RTOS
so, removed ACRLIB from PMU ucode & disabled WPR
init from PMU by setting ops .init_wpr_region to NULL
-Adding dummy bytes to PMU supersurface member therm
data structure to match with tu10x ucode supersurface
change sequence offset.
-PMU ucode update to enable ECC interrupt
-Enable ECC interrupt in Falcon interrupt source
-Enable routing of ECC interrupt to HOST.
JIRA NVGPU-1150
Change-Id: Ib49f9bf811dc2a01252461c16a44869e07412005
Reviewed-on: https://git-master.nvidia.com/r/1929895
Signed-off-by: Vaikundanathan S <vaikuns@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1957846
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Simplify object ownership by passing the gr_ctx around directly instead
of reading from tsg via a channel; the caller holds the gr_ctx already.
Also pass the channel vm and vpr flag instead of the whole channel as
only those are needed.
Jira NVGPU-1149
Change-Id: Ic0921ccaf65f208105b25f08f8d7b581a56b40fe
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1925431
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the result of a bitwise operation is used as a
boolean in the controlling expression of if and loop statements.
JIRA NVGPU-1020
Change-Id: I6a756ee1bbb45d43f424d2251eebbc26278db417
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1936334
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 8.3 requires that all declarations of a function
shall use the same parameter names and type qualifiers. There
are cases where the parameter names do not match between
function prototype and declaration. This patch will fix some of
these violations by renaming the parameter as required.
JIRA NVGPU-847
Change-Id: I3f7280b0e4c21b1c2d70fd7f899cf920075f87a3
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1927103
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
