Added NVGPU_DBG_GPU_IOCTL_SET_CTX_MMU_DEBUG_MODE ioctl to set MMU
debug mode for a given context.
Added gr.set_mmu_debug_mode HAL to change NV_PGPC_PRI_MMU_DEBUG_CTRL
for a given channel. HAL implementation for native case is
gm20b_gr_set_mmu_debug_mode. It internally uses regops, which directly
writes to the register if the context is resident, or writes to
gr context otherwise.
Added NVGPU_SUPPORT_SET_CTX_MMU_DEBUG_MODE to enable the feature.
NV_PGPC_PRI_MMU_DEBUG_CTRL has to be context switched in FECS ucode,
so the feature is only enabled on TU104 for now.
Bug 2515097
Change-Id: Ib4efaf06fc47a8539b4474f94c68c20ce225263f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110720
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.pmu_init_perfmon = nvgpu_pmu_init_perfmon_rpc,
.pmu_perfmon_start_sampling = nvgpu_pmu_perfmon_start_sampling_rpc,
.pmu_perfmon_stop_sampling = nvgpu_pmu_perfmon_stop_sampling_rpc,
.pmu_perfmon_get_samples_rpc = nvgpu_pmu_perfmon_get_samples_rpc,
These were being called by:
g->ops.pmu.pmu_init_perfmon,
g->ops.pmu.pmu_perfmon_start_sampling,
g->ops.pmu.pmu_perfmon_stop_sampling,
g->ops.pmu.pmu_perfmon_get_samples_rpc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_perfmon_init(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_start_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_stop_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_get_samples_rpc_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
and based on hardware chip call the chip specific
perfmon sw init function: nvgpu_gv11b_perfmon_sw_init() and
nvgpu_gv100_perfmon_sw_init() and assign the sw ops for perfmon
JIRA NVGPU-3210
Change-Id: I2470863f87a7969e3c0454fa48761499b08d445c
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109899
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below 5.7 violations are reported in common.gr.config unit :
nvgpu/drivers/gpu/nvgpu/common/gr/gr_config.c:628:
identifier_reuse: Identifier "sm_info" is already used to represent a type.
Fix them by renaming struct sm_info to struct nvgpu_sm_info
Jira NVGPU-3225
Change-Id: I26f70a4ed2a5a845e0dc9daeb8fb5474e35d42fb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110986
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gv11b MMU fault handling code into a new mm.mmu_fault HAL.
Also move the existing gmmu_mmu_fault HAL code into this HAL as they
are basically the same logical entity.
JIRA NVGPU-2042
JIRA NVGPU-1313
Change-Id: I41d3e180c762f191d4de3237e9052bdc456f9e4c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the get_litter() functions out of the main hal init to its own
source file for each device. This allows removal of the hw_proj_*.h
files in the main hal init file. This reduces the number of hw header
includes per file creating better code isolation.
JIRA NVGPU-3274
Change-Id: I9e04294434acf274ccc2236646f0f15f710a6976
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2107751
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create a new unit common.fbp which initializes fbp support and provides
APIs to retrieve fbp data.
Create private header with below data
struct nvgpu_fbp {
u32 num_fbps;
u32 max_fbps_count;
u32 fbp_en_mask;
u32 *fbp_rop_l2_en_mask;
};
Expose below public APIs to initialize/remove fbp support:
nvgpu_fbp_init_support()
nvgpu_fbp_remove_support()
vgpu_fbp_init_support() for vGPU
Expose below APIs to retrieve fbp data
nvgpu_fbp_get_num_fbps()
nvgpu_fbp_get_max_fbps_count()
nvgpu_fbp_get_fbp_en_mask()
nvgpu_fbp_get_rop_l2_en_mask()
Use above APIs to retrieve fbp data in all the code.
Remove corresponding fields from struct nvgpu_gr since they are no
longer referred from that structure
Jira NVGPU-3124
Change-Id: I027caf4874b1f6154219f01902020dec4d7b0cb1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108617
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
channel.c calling nvgpu_gr_flush_channel_tlb() creating circular
dependency between gr and fifo. Avoid this by moving channel tlb
related data to struct nvgpu_gr_intr in gr_intr_priv.h and
initialized this data in gr_intr.c.
Created following new gr intr hal and called this new hal from channel.c
void (*flush_channel_tlb)(struct gk20a *g);
JIRA NVGPU-3214
Change-Id: I2d259bf52db967273030680f50065af94a17f417
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109274
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There are many miscellaneous HALs for various MM related functionality.
This patch aims to migrate all the remaining MM code from the <chip>/
mm_<chip>.[ch] files in HAL files under hal/.
Much of this is fairly straightforward copy/paste and updates to the
HAL init files.
The exception to that is the move of the left over gv11b MMU fault
handling code in mm_gv11b.c. Having both a hal/mm/mm/mm_gv11b.c and
a gv11b/mm_gv11b.c file causes tmake to choke so the gv11b/mm_gv11b.c
file was moved to gv11b/mmu_fault_gv11b.c. This will be cleaned up in
a subsequent patch.
JIRA NVGPU-2042
Change-Id: I12896de865d890a61afbcb71159cff486119ffb8
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed
- gk20a_tsg_set_runlist_interleave -> nvgpu_tsg_set_interleave
Moved set_interleave from runlist to tsg
- runlist.set_interleave -> tsg.set_interleave
Existing HAL was only setting tsg->interleave, and was not
accessing any register. This is now done in nvgpu_tsg_set_interleave
and tsg.set_interleave is only used in vgpu case.
Jira NVGPU-3156
Change-Id: I5dac1305afcbd950214316289cf704ee8b43fc89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100610
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg
- set_timeslice
- default_timeslice_us
Renamed
- gk20a_tsg_set_timeslice -> nvgpu_tsg_set_timeslice
- min_timeslice_us -> tsg_timeslice_min_us
- max_timeslice_us -> tsg_timeslice_max_us
Scale timeslice to take into account PTIMER clock in
nvgpu_runlist_append_tsg.
Removed gk20a_channel_get_timescale_from_timeslice, and
instead moved timeout and scale computation into runlist HAL,
when building TSG entry:
- runlist.get_tsg_entry
Use ram_rl_entry_* accessors instead of hard coded values
for default and max timeslices.
Added #defines for min, max and default timeslices.
Jira NVGPU-3156
Change-Id: I447266c087c47c89cb6a4a7e4f30acf834b758f0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100052
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently max_css_buffer_size is incorrectly stored in struct nvgpu_gr
Add a new hal g->ops.css.get_max_buffer_size() to get the size and
remove the variable from struct nvgpu_gr
Jira NVGPU-3125
Change-Id: If78fd86559526b84031051e281a98327a46fc11d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gk20a_init_mm_setup_hw to common code. This function just
calls HALs to initialize various bits of HW. However, since this
code assumes that (some of) the HALs are present this code is treated
as a vGPU HAL (that is it's NULL for vGPU).
This patch also renames the MM HW init HAL.
Sicne the gv11b variant of this setup_hw HAL did have some differences
from the gk20a version the new common version required some work. The
gv11b code was copied into the common function but now the gv11b
specific calls were HAL'ified (since they will need to be anyway for
the MMU fault buf code) and protected by an if-condition.
JIRA NVGPU-2042
Change-Id: I959293394ee8793923d858ee37b7ce346096654f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104541
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the remaining GMMU HAL related code from the gm20b/, gp10b/,
and gv11b/ directories to new gmmu hal source files.
Also update all makefiles and HAL init code to refelct the new
location of the headers and source code.
JIRA NVGPU-2042
Change-Id: Ic9b85cc547bd0f994ad11042fc4093c517327399
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103672
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
cyclestats_snapshot data and lock is right now stored in struct nvgpu_gr
Use case itself is not specific to GR engine but in general it applies
to other units outside of GR too.
Hence it makes sense to move both data and lock to struct gk20a instead
of keeping them in struct nvgpu_gr
Update all cyclestats_snapshot code to refer data/lock from struct gk20a
Remove gr_priv.h header include from cyclestats_snapshot.c
Some of the functions were mistakenly declared in gr_gk20a.h.
Move them to cyclestats_snapshot.h and rename them to form nvgpu_css_*()
Jira NVGPU-1103
Change-Id: I3fb32fe96f0ca6613f4640c8bd227b9e0e02dca3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104848
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific recovery code for volta onwards
architecture to hal/rc/rc_gv11b.c
Rename
fifo.teardown_ch_tsg -> fifo.recover
gk20a_runlist_update_locked -> nvgpu_runlist_update_locked
Remove
Unused h/w headers from fifo_gv11b.c
Use local variable f instead of g->fifo
JIRA NVGPU-1314
Change-Id: Ia535bbe4780e7241fdd911a8f577c6b98cf0fe53
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102897
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a.ctx_vars struct right now stores sizes for golden_image, zcull,
pm_ctxsw, and gfxp_preemption_buffer.
but these sizes should be really owned by respective units and should
be assigned to units as soon as they are queried from FECS
Add new structure to nvgpu_gr_falcon to hold sizes that will be queried
from FECS
struct nvgpu_gr_falcon_query_sizes {
u32 golden_image_size;
u32 pm_ctxsw_image_size;
u32 preempt_image_size;
u32 zcull_image_size;
};
gr.falcon unit now queries sizes from FECS and fills this structure.
gr.falcon unit also exposes below APIs to query above sizes
u32 nvgpu_gr_falcon_get_golden_image_size(struct nvgpu_gr_falcon *falcon);
u32 nvgpu_gr_falcon_get_pm_ctxsw_image_size(struct nvgpu_gr_falcon *falcon);
u32 nvgpu_gr_falcon_get_preempt_image_size(struct nvgpu_gr_falcon *falcon);
u32 nvgpu_gr_falcon_get_zcull_image_size(struct nvgpu_gr_falcon *falcon);
gr.gr unit now calls into gr.falcon unit to initailize sizes, and then
uses above exposed APIs to set sizes into respective units
vGPU will too fill up struct nvgpu_gr_falcon_query_sizes with all the sizes
and then above APIs will be used to set sizes into respective units
All of above means size variables in gr_gk20a.ctx_vars struct are no more
being referred. Delete them.
Jira NVGPU-3112
Change-Id: I8b8e64ee0840c3bdefabc8ee739e53a30791f2b3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103478
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct gr_gk20a defines boolean flag golden_image_initialized to
indicate if golden_image is initialized or not
common.gr.obj_ctx also added a flag of its own to check if golden_image
is ready
Add new API nvgpu_gr_obj_ctx_is_golden_image_ready() in
common.gr.obj_ctx unit to get status of golden_image
Use this new API everywhere to check if golden image is ready
Remove g->gr.ctx_vars.golden_image_initialized
Also remove ctx_mutex from struct gr_gk20a
Add new flag golden_image_initialized to struct nvgpu_pmu_pg and set it
when golden image is initialized. This is needed to avoid circular
dependency between GR and PMU
Jira NVGPU-3112
Change-Id: Id391294cede6424e15a9a9de29c40d013b509534
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gr_gk20a_handle_fecs_error from gr_gk20a.c to
nvgpu_gr_intr_handle_fecs_error in common.gr.intr unit
Move gr_gp10b_handle_fecs_error and gr_gv11b_handle_fecs_error
to hal.gr.intr unit
JIRA NVGPU-3016
Change-Id: I5b7c48ebfd7b13f497980c4d0b64d718649154bd
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103741
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gr_gp10b_handle_sm_exception from gr_gp10b to
gp10b_gr_intr_handle_sm_exception in hal.gr.intr unit
Move gr_gk20a_handle_sm_exception from gr_gk20a to
nvgpu_gr_intr_handle_sm_exception in common.gr.intr
Move nvgpu_report_gr_sm_exception to common.gr.intr
JIRA NVGPU-3016
Change-Id: I545ddca052122f87685f35f515831841a246dab3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make a hal/mm/gmmu sub-unit for the GMMU HAL code. Also move the
gk20a specific HAL code there. gp10b will happen in the next patch.
This change also updates all the GMMU related HAL usage, of which
there is quite a bit. Generally the only change is a .gmmu needs to
be inserted into the HAL path. Each HAL init was also updated.
JIRA NVGPU-2042
Change-Id: I6c46bdfddb8e021f56103d9457fb3e2a226f8947
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
vgpu_finalize_poweron_common calls g->ops.fifo.channel_resume.
This call is not valid anymore as no such function pointer exists.
Correct this by replace g->ops.fifo.channel_resume() by
g->ops.channel.resume_all_serviceable_ch()
Change-Id: I09fdfce64d48ec6971396fb2ecabc43051e9bf10
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102359
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.get_preemption_mode_flags() hal is used to fetch information
on supported preemption modes and default preemption mode
Temporary struct nvgpu_preemption_modes_rec is used for this purpose
and is defined in gk20a/gr_gk20a.h right now.
Split above hal into two separate hals and move them to hal.gr.init unit
g->ops.gr.init.get_supported__preemption_modes()
g->ops.gr.init.get_default_preemption_modes()
These hals now return respective flags in pointers passed in function
parameter list, so there is no need to use temporary structure anymore
Hence delete struct nvgpu_preemption_modes_rec
Implement gm20b/gp10b chip specific hals in hal.gr.init unit.
Delete g->ops.gr.get_preemption_mode_flags() hal
Jira NVGPU-3126
Change-Id: I84f507fcd8d122bb7f0ecf697e8b4f16c9339ce1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102455
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Basic units like fifo, rc are having dependency on
gr_falcon. Avoided outside gr units dependency on gr_falcon
by moving following functions to gr:
int nvgpu_gr_falcon_disable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_disable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_enable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_enable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_halt_pipe(struct gk20a *g); ->
int nvgpu_gr_halt_pipe(struct gk20a *g);
HALs also moved accordingly and updated code to reflect this.
Also moved following data back to gr from gr_falcon:
struct nvgpu_mutex ctxsw_disable_mutex;
int ctxsw_disable_count;
JIRA NVGPU-3168
Change-Id: I2bdd4a646b6f87df4c835638fc83c061acf4051e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100009
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific preempt code to hal/fifo
Move non-chip specific preempt code to common/fifo
Remove fifo.get_preempt_timeout
Rename gk20a_fifo_get_preempt_timeout -> nvgpu_preempt_get_timeout
Rename gk20a_fifo_preempt -> nvgpu_preempt_channel
Add fifo.preempt_trigger hal for issuing preempt
Add fifo.preempt_runlists_for_rc hal for preempting runlists during rc
Add fifo.preempt_poll_pbdma hal
Add nvgpu_preempt_poll_tsg_on_pbdma to be called from rc
JIRA NVGPU-3144
Change-Id: Idb089acaa0c6ca08de17487c3496459a61f0bcd4
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100819
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
