Add a HAL op for resetting the eng_faulted and pbdma_faulted states on a
channel. This used to be a local feature in fifo_gv11b.c; the HAL is
defined for all chips from gv11b onwards.
Jira NVGPU-1307
Change-Id: I120a59c429851cc69e712ddd5b06a4b3d16c06c9
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017269
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor read accesses to the ccsr_channel register for channel state to
be done via a channel HAL op for all chips. A new op called read_state
is added for this; information needed by other units is collected in a
new struct nvgpu_channel_hw_state.
Jira NVGPU-1307
Change-Id: Iff9385c08e17ac086d97f5771a54b56b2727e3c4
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017266
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extract out the HAL ops' implementation that now belongs to the channel
unit. This unit is responsible for channel register accesses and the
like (ccsr_*).
Rename channel_gm20b_bind to gm20b_fifo_channel_bind to match with the
rest of the naming. Same with channel_gv11b_unbind.
Jira NVGPU-1307
Change-Id: I58b9d96dbdaf36bdb163a5729544a41faec828ab
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017262
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out ops that belong to channel unit to a new section called
channel. Channel is a broad concept; this includes just the code that
accesses channel registers (ccsr_*). This is effectively just renaming;
the implementation still stays put.
The word "channel" is also dropped from certain HAL entries to avoid
redundancy (e.g., channel.disable_channel -> channel.disable).
fifo.get_num_fifos gets an entirely new name: channel.count.
Jira NVGPU-1307
Change-Id: I9a08103e461bf3ddb743aa37ababee3e0c73c861
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017261
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently clk_arb needs PSTATE to be true for dGPU.
Setting PSTATE only FALSE, causes issue as clk_arb fails.
There is no such dependency of PSTATE on iGPU.
Making it unified with a call to check_clk_arb_support().
This call is implemented based on its dependency in iGPU, dGPU.
check_clk_arb_support returns true if supported, else false.
Jira NVGPU-1948
Change-Id: I108dc12bd6ad8d0e074352080c978b7dda9bee05
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2014775
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the APIs nvgpu_channel_sync_get_syncpt_id() and
channel_sync_syncpt_get_id() return u32s rather than converting to
ints and back.
Also define FIFO_INVAL_SYNCPT_ID to use for invalid syncpt IDs rather
than using magic numbers.
JIRA NVGPU-1008
Change-Id: I4dde6b15fd3708fb0126b46c6fea8ac1b447c7ce
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2014821
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In __gr_gk20a_exec_ctx_ops(), we right now call gr_gk20a_ctx_patch_smpc()
even if operations are on pm_ctx image which is incorrect since this is
only required for SMPC operations on main context image
Fix this by not calling gr_gk20a_ctx_patch_smpc() for pm_ctx image
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: I5111fb0e6ea1f329750b42a37a98f5c006b47deb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011095
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a_update_hwpm_ctxsw_mode() right now validates the incoming
hwpm mode, checks if it is already set, and if not, it will go ahead
and set the new hwpm mode by calling g->ops.gr.ctxsw_prog HALs
Instead of programming hwpm mode in gr_gk20a.c, move the programming
to gr/ctx and gr/subctx units by adding below APIs
nvgpu_gr_ctx_prepare_hwpm_mode() - validate the incoming mode and
check if it is already set
nvgpu_gr_ctx_set_hwpm_mode() - set pm mode in graphics context
nvgpu_gr_subctx_set_hwpm_mode() - set pm mode in subcontext
Add gpu_va field to struct pm_ctx_desc to store the gpu_va to be
programmed into context
Rename NVGPU_DBG_HWPM_CTXSW_MODE_* to NVGPU_GR_CTX_HWPM_CTXSW_MODE_*
and move them to gr/ctx.h
Remove below HALs since they are no longer used
g->ops.gr.ctxsw_prog.set_pm_mode_no_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_stream_out_ctxsw()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: Id2a4d498182ec0e3586dc7265f73a25870ca2ef7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_ctx_zcull_setup(), we configure context/subcontext with
zcull details
This API now does it directly by calling g->ops.gr.ctxsw_prog HAL
Move all context/subcontext setup to gr/ctx and gr/subctx units
respectively
Define and use below new APIs for same
gr/ctx : nvgpu_gr_ctx_zcull_setup()
gr/subctx : nvgpu_gr_subctx_zcull_setup()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: I1b7b16baea60ea45535c623b5b41351610ca433e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011090
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
LSF loader cleanup, on gm20b/gp10b PMU falcon & other GR falcons
uses different struct to store loader config which needs different
functions to fill LSF loader config data, but on gv11b/gv10x/tu10a
uses common falcon struct to store loader config, so made single
function to fill LSF loader config data using ACR LSF struct &
removed duplicate code.
Removed ACR LSF loader ops which were part of PMU ops
to cleanup dependency
JIRA NVGPU-1148
Change-Id: I681829e05463d2517a4049433d8b0de3adeb06d9
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012853
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added data struct under ACR struct to manage LS falcons ucode
as LS falcon ucode holds multiple properties & can be set at acr
init stage to bootstrap LS falcons as required, at present LS falcons
code is part ACR & partially part of PMU code to setup LSF bootstrap,
so, needed to clean up the dependency.
JIRA NVGPU-1148
Change-Id: Ie206e129e3db838041db44d5227ab76a1de991c8
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012763
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A comment for gk20a_fifo_update_runlist() says:
/* add/remove a channel from runlist
special cases below: runlist->active_channels will NOT be changed.
(ch == NULL && !add) means remove all active channels from runlist.
(ch == NULL && add) means restore all active channels on runlist. */
Those special cases call for a new function, so add that. Delete the
update_runlist HAL op and add update_for_channel (like update_runlist
without the special cases) and reload (no channel to add or remove, just
the special cases).
While at it, rename gk20a_fifo_update_runlist_ids to
nvgpu_runlist_reload_ids. It's common across chips and does what the
reload HAL does but for a list of several IDs.
Jira NVGPU-1922
Change-Id: I9a99ab03a636a1214c021faad359d2b304a9472f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2013058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit gr/config to initialize GR configuration like GPC/TPC
count, MAX count and mask
Create new structure nvgpu_gr_config that stores all the configuration
and that is owned by the new unit
Move below fields from struct gr_gk20a to nvgpu_gr_config in gr/config.h
Struct gr_gk20a now only holds the pointer to struct nvgpu_gr_config
u32 max_gpc_count;
u32 max_tpc_per_gpc_count;
u32 max_zcull_per_gpc_count;
u32 max_tpc_count;
u32 gpc_count;
u32 tpc_count;
u32 ppc_count;
u32 zcb_count;
u32 pe_count_per_gpc;
u32 *gpc_tpc_count;
u32 *gpc_ppc_count;
u32 *gpc_zcb_count;
u32 *pes_tpc_count[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_tpc_mask;
u32 *pes_tpc_mask[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_skip_mask;
u8 *map_tiles;
u32 map_tile_count;
u32 map_row_offset;
Remove gr->sys_count since it was already no longer used
common/gr/config/gr_config.c unit now exposes the APIs to initialize
the configuration and also to query the configuration values
nvgpu_gr_config_init() is called to initialize GR configuration from
gr_gk20a_init_gr_config() and gr_gk20a_init_map_tiles() is simply
renamed as nvgpu_gr_config_init_map_tiles()
Expose new API nvgpu_gr_config_deinit() to deinit the configuration
Expose nvgpu_gr_config_get_*() APIs to query above configuration
fields stored in nvgpu_gr_config structure
Update vgpu_gr_init_gr_config() to initialize the configuration
from gr->config structure
Chip specific HALs that access GR register for initialization
are implemented in common/gr/config/gr_config_gm20b.c
Set these HALs for all GPUs
Jira NVGPU-1879
Change-Id: Ided658b43124ea61b9f273b82b73fdde4ed3c8f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012167
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch changes pmu_payload_extract to return a status based
on the result of nvgpu_falcon_copy_from_dmem and propagates it upstream.
It also removes the pmu_payload_extract_rpc which appeared useless.
JIRA NVGPU-677
Change-Id: I299c500a356816f884abd1dc843ed18a37974cde
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2008895
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
