Extract out the HAL ops' implementation that now belongs to the channel
unit. This unit is responsible for channel register accesses and the
like (ccsr_*).
Rename channel_gm20b_bind to gm20b_fifo_channel_bind to match with the
rest of the naming. Same with channel_gv11b_unbind.
Jira NVGPU-1307
Change-Id: I58b9d96dbdaf36bdb163a5729544a41faec828ab
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017262
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out ops that belong to channel unit to a new section called
channel. Channel is a broad concept; this includes just the code that
accesses channel registers (ccsr_*). This is effectively just renaming;
the implementation still stays put.
The word "channel" is also dropped from certain HAL entries to avoid
redundancy (e.g., channel.disable_channel -> channel.disable).
fifo.get_num_fifos gets an entirely new name: channel.count.
Jira NVGPU-1307
Change-Id: I9a08103e461bf3ddb743aa37ababee3e0c73c861
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2017261
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently clk_arb needs PSTATE to be true for dGPU.
Setting PSTATE only FALSE, causes issue as clk_arb fails.
There is no such dependency of PSTATE on iGPU.
Making it unified with a call to check_clk_arb_support().
This call is implemented based on its dependency in iGPU, dGPU.
check_clk_arb_support returns true if supported, else false.
Jira NVGPU-1948
Change-Id: I108dc12bd6ad8d0e074352080c978b7dda9bee05
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2014775
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a_update_hwpm_ctxsw_mode() right now validates the incoming
hwpm mode, checks if it is already set, and if not, it will go ahead
and set the new hwpm mode by calling g->ops.gr.ctxsw_prog HALs
Instead of programming hwpm mode in gr_gk20a.c, move the programming
to gr/ctx and gr/subctx units by adding below APIs
nvgpu_gr_ctx_prepare_hwpm_mode() - validate the incoming mode and
check if it is already set
nvgpu_gr_ctx_set_hwpm_mode() - set pm mode in graphics context
nvgpu_gr_subctx_set_hwpm_mode() - set pm mode in subcontext
Add gpu_va field to struct pm_ctx_desc to store the gpu_va to be
programmed into context
Rename NVGPU_DBG_HWPM_CTXSW_MODE_* to NVGPU_GR_CTX_HWPM_CTXSW_MODE_*
and move them to gr/ctx.h
Remove below HALs since they are no longer used
g->ops.gr.ctxsw_prog.set_pm_mode_no_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_stream_out_ctxsw()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: Id2a4d498182ec0e3586dc7265f73a25870ca2ef7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A comment for gk20a_fifo_update_runlist() says:
/* add/remove a channel from runlist
special cases below: runlist->active_channels will NOT be changed.
(ch == NULL && !add) means remove all active channels from runlist.
(ch == NULL && add) means restore all active channels on runlist. */
Those special cases call for a new function, so add that. Delete the
update_runlist HAL op and add update_for_channel (like update_runlist
without the special cases) and reload (no channel to add or remove, just
the special cases).
While at it, rename gk20a_fifo_update_runlist_ids to
nvgpu_runlist_reload_ids. It's common across chips and does what the
reload HAL does but for a list of several IDs.
Jira NVGPU-1922
Change-Id: I9a99ab03a636a1214c021faad359d2b304a9472f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2013058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit gr/config to initialize GR configuration like GPC/TPC
count, MAX count and mask
Create new structure nvgpu_gr_config that stores all the configuration
and that is owned by the new unit
Move below fields from struct gr_gk20a to nvgpu_gr_config in gr/config.h
Struct gr_gk20a now only holds the pointer to struct nvgpu_gr_config
u32 max_gpc_count;
u32 max_tpc_per_gpc_count;
u32 max_zcull_per_gpc_count;
u32 max_tpc_count;
u32 gpc_count;
u32 tpc_count;
u32 ppc_count;
u32 zcb_count;
u32 pe_count_per_gpc;
u32 *gpc_tpc_count;
u32 *gpc_ppc_count;
u32 *gpc_zcb_count;
u32 *pes_tpc_count[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_tpc_mask;
u32 *pes_tpc_mask[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_skip_mask;
u8 *map_tiles;
u32 map_tile_count;
u32 map_row_offset;
Remove gr->sys_count since it was already no longer used
common/gr/config/gr_config.c unit now exposes the APIs to initialize
the configuration and also to query the configuration values
nvgpu_gr_config_init() is called to initialize GR configuration from
gr_gk20a_init_gr_config() and gr_gk20a_init_map_tiles() is simply
renamed as nvgpu_gr_config_init_map_tiles()
Expose new API nvgpu_gr_config_deinit() to deinit the configuration
Expose nvgpu_gr_config_get_*() APIs to query above configuration
fields stored in nvgpu_gr_config structure
Update vgpu_gr_init_gr_config() to initialize the configuration
from gr->config structure
Chip specific HALs that access GR register for initialization
are implemented in common/gr/config/gr_config_gm20b.c
Set these HALs for all GPUs
Jira NVGPU-1879
Change-Id: Ided658b43124ea61b9f273b82b73fdde4ed3c8f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012167
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The support sparse HAL severs only one purpose: return true or false
depending on whether the given chip supports sparse mappings. This
HAL is used to, in turn, program (or not) the
NVGPU_SUPPORT_SPARSE_ALLOCS enabled flag. So instead of having all
this rigmarole to program this flag just program it for all native
GPUs. Then, in the vGPU specific characteristics function disable it
explicitly. This seems to have precedent already.
JIRA NVGPU-1737
JIRA NVGPU-1934
Change-Id: I630928ad656aaffc09fdc6b7fec9fc423aa94c38
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2006796
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 21.2 forbids the usage of identifier names which start with
an underscore. This is because identifier names which start with an
underscore are reserved for the C library. This patch fixes rule 21.2
issues in vgpu header guard names.
JIRA NVGPU-1028
Change-Id: I89b450f0c1960ad93392971dcd6ef3c15d2460db
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011872
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Scott Long <scottl@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
sema cmdbuf specific functions are only for the sync functionality
of nvgpu and do not belong to fifo.
construct files sema_cmdbuf_gk20a.h and sema_cmdbuf_gk20a.c
under common/sync to contain the syncpt specific cmdbuf functions
for arch gk20a.
Jira NVGPU-1308
Change-Id: Iebeebe7a3de627f2de08d4ced74bb1aabf1eb53c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975922
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
syncpt cmdbuf specific functions are only for the sync functionality of
nvgpu and donot belong to fifo.
construct files syncpt_cmdbuf_gk20a.h and syncpt_cmdbuf_gk20a.c under
common/sync to contain the syncpt specific cmdbuf functions for arch
gk20a.
The word 'fifo' is also removed from the name of these functions.
Jira NVGPU-1308
Change-Id: I1a1fd1d31f7decd1398f8e2ff625f95cf1f55033
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975920
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
sync cmbbuf specific ops pointers are moved into a new struct sync_ops
under the parent struct gpu_ops. The HAL assignments to the gk20a and
gv11b versions are updated to match the new struct type.
Jira NVGPU-1308
Change-Id: I1d9832ed5e938cb65747f0f6d34088552f75e2bc
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975919
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Avoid including the HW headers directly in the HAL listings: add
indirection functions for the two ops that were naked:
- runlist.eng_runlist_base_size
- runlist.runlist_entry_size
GV100 gets a new fifo HAL file as base_size is the first one (and
currently the only one) of GV100-specific ops.
NVGPU-1309
Change-Id: Idf28b5e26c798457132ef595fa55c65bcddb1b31
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1997826
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move regops (gk20a/regops_gk20a.c) to separate unit common/regops/regops.c
Move corresponding header (gk20a/regops_gk20a.h) to include/nvgpu/regops.h
Move rest of the platform HAL files to common/regops/ as well
Fix all the header includes to include new public header
Remove *_apply_smpc_war() declarations from headers. Corresponding
functions were cleaned up already, and declarations were left somehow
Jira NVGPU-620
Change-Id: I8b8065b9c91f69809bdeb1b4caecdc7582c8a992
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1998723
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename __nvgpu_set_enabled() to nvgpu_set_enabled(). The original
double underscore was present to indicate that this function is a
function with potentially unintended side effects (enabling a feature
has wide ranging impact).
To not lose this documentation a comment was added to convey that this
function must be used with care.
JIRA NVGPU-1029
Change-Id: I8bfc6fa4c17743f9f8056cb6a7a0f66229ca2583
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989434
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently all the global contex buffers are mapped into each graphics
context. Move all the mapping/unmapping support to gr/ctx unit since
all the mappings are owned by context itself
Add nvgpu_gr_ctx_map_global_ctx_buffers() that maps all the global
context buffers into given gr_ctx
Add nvgpu_gr_ctx_get_global_ctx_va() that returns VA of the mapping
for requested index
Remove g->ops.gr.map_global_ctx_buffers() since it is no longer
required. Also remove below APIs
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_unmap_global_ctx_buffers()
gr_tu104_map_global_ctx_buffers()
Remove global_ctx_buffer_size from nvgpu_gr_ctx since it is no
longer used
Jira NVGPU-1527
Change-Id: Ic185c03757706171db0f5a925e13a118ebbdeb48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987739
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/ctx.c to manage GR context
This unit provides interfaces to allocate/free/map/unmap GR context,
patch context, pm context, ctxsw {preempt/spill/betacb/pagepool/rtvcb}
buffers.
It also provides APIs to set size of above buffers
Add new header file include/nvgpu/gr/ctx.h to declare all the interfaces.
Move nvgpu_gr_ctx, patch_desc, pm_ctx_desc, zcull_ctx_desc structures
to this unit
Add new structure nvgpu_gr_ctx_desc to hold context description
parameters. For now we add sizes of all the buffers here.
Add this structure to gr_gk20a for global reference
Remove gr_gp10b_alloc_buffer() since it is no longer used
Rename g->ops.gr.alloc_gfxp_rtv_cb() to g->ops.gr.init_gfxp_rtv_cb()
since this HAL now only sets the size of rtvcb ctxsw buffer
Remove gr->ctx_vars.buffer_size and gr->ctx_vars.buffer_total_size
since they were redundant. We already have gr->ctx_vars.golden_image_size
to denote golden image size
Jira NVGPU-1527
Change-Id: I8847b347f80235209dd5e28d979e79984ab85408
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With intention to make falcon header free of private data we are making
all falcon struct members (pmu.flcn, sec2.flcn, fecs_flcn, gpccs_flcn,
nvdec_flcn, minion_flcn, gsp_flcn) in the gk20a, pointers to struct
nvgpu_falcon. Falcon structures are allocated/deallocated by
falcon_sw_init & _free respectively.
While at it, remove duplicate gk20a.pmu_flcn and gk20a.sec2_flcn,
refactor flcn_id assignment and introduce falcon_hal_sw_free.
JIRA NVGPU-1594
Change-Id: I222086cf28215ea8ecf9a6166284d5cc506bb0c5
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1968242
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gk20a_gr_handle_fecs_error(), we right now check the error code in
mailbox to identify if we hit timestamp buffer full error interrupt
This error code right now is hard coded to 0x26
But on Turing ucode this error code is set to 0x32
Add new HAL g->ops.fecs_trace.get_buffer_full_mailbox_val() to get
correct error code per platform and use this in
gk20a_gr_handle_fecs_error()
Bug 200471541
Bug 2469604
Change-Id: I7325354b39d35b1c8b218e554814316d22950469
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978144
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the fifo code to use the HALs exposed by "Top" unit to
read data from device_info table.
The information for GRAPHICS engine in device_info table is
now parsed using the get_device_info HAL from "Top" unit.
Copy engine(CE) has multiple entries in the device_info table
corresponding to each instance of the engine. Prior to Pascal, each
instance of an engine was denoted by different engine type.
For example in GM20B, there are engine types like COPY_ENGINE0,
COPY_ENGINE1 and so on. In Pascal and chips beyond, a new field
called "inst_id" is added and the engine_type is kept the same for
different instances of an engine. For example in GP10B, all copy
engine entries have same engine type i.e ENGINE_LCE, but different
inst_ids. So for Pascal and chips beyond, we use a different HAL to
get CE information from device_info table.
JIRA NVGPU-1053
Change-Id: Ib40a616d903a5dbef5730678c2ebc3454b8e900d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969400
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Follow-up change to rename g->ops.mm.bar1_map (and implementations)
to more specific g->ops.mm.bar1_map_userd.
Also use nvgpu_big_zalloc() to allocate userd slabs memory descriptors.
Bug 2422486
Bug 200474793
Change-Id: Iceff3bd1d34d56d3bb9496c179fff1b876b224ce
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970891
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any tsg specific functions that does high-level software-centric
operations below to the TSG unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/tsg.c and also rename them to use the
prefix nvgpu_tsg_*
gk20a_fifo_set_ctx_mmu_error_tsg
gk20a_fifo_abort_tsg
gk20a_fifo_error_tsg
gk20a_fifo_check_tsg_ctxsw_timeout
Jira NVGPU-1237
Change-Id: I4e3da821a878d4b4a0a0b53fbb7f4c10f135f58d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1934299
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any channel specific functions having high-level software-centric
operations belong to the channel unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/channel.c. Also, rename the functions
to use the prefix nvgpu_channel_*.
gk20a_fifo_set_ctx_mmu_error_ch
gk20a_fifo_error_ch
gk20a_fifo_check_ch_ctxsw_timeout
Jira NVGPU-1237
Change-Id: Id6b6d69bbed193befbfc4c30ecda1b600d846199
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.alloc_gr_ctx HAL right now allocates graphics context and
also initializes preemption mode for various platforms
Separate out a new HAL g->ops.gr.init_ctxsw_preemption_mode that
initializes preemption mode and call it from gk20a_alloc_obj_ctx()
after context is created
g->ops.gr.alloc_gr_ctx now only allocates the context as the name
suggests
Jira NVGPU-1527
Change-Id: I8a44672d5ab2ebfe315e6334115265e4ee4f24f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972254
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.enable_cde_in_fecs and g->ops.gr.update_boosted_ctx
are no longer required since we can directly call
g->ops.gr.ctxsw_prog.set_cde_enabled and
g->ops.gr.ctxsw_prog.set_pmu_options_boost_clock_frequencies
respectively
remove those functions and the ops
Jira NVGPU-1526
Change-Id: Idb0ad5f634e78aac44ec325ba2b7f59c612b29e8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972184
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU counters #0 and #4 are used to count total cycles and busy cycles.
These counts are used by podgov to estimate GPU load.
PMU idle intr status register is used to monitor overflow. Overflow
rarely occurs because frequency governor reads and resets the counters
at a high cadence. When overflow occurs, 100% work load is reported to
frequency governor.
Bug 1963732
Change-Id: I046480ebde162e6eda24577932b96cfd91b77c69
Signed-off-by: Peng Liu <pengliu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1939547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We had to force allocation of physically contiguous memory for
USERD in nvlink case, as a channel's USERD address is computed as
an offset from fifo->userd address, and nvlink bypasses SMMU.
With 4096 channels, it can become difficult to allocate 2MB of
physically contiguous sysmem for USERD on a busy system.
PBDMA does not require any sort of packing or contiguous USERD
allocation, as each channel has a direct pointer to that channel's
512B USERD region. When BAR1 is supported we only need the GPU VAs
to be contiguous, to setup the BAR1 inst block.
- Add slab allocator for USERD.
- Slabs are allocated in SYSMEM, using PAGE_SIZE for slab size.
- Contiguous channels share the same page (16 channels per slab).
- ch->userd_mem points to related nvgpu_mem descriptor
- ch->userd_offset is the offset from the beginning of the slab
- Pre-allocate GPU VAs for the whole BAR1
- Add g->ops.mm.bar1_map() method
- gk20a_mm_bar1_map() uses fixed mapping in BAR1 region
- vgpu_mm_bar1_map() passes the offset in TEGRA_VGPU_CMD_MAP_BAR1
- TEGRA_VGPU_CMD_MAP_BAR1 is called for each slab.
Bug 2422486
Bug 200474793
Change-Id: I202699fe55a454c1fc6d969e7b6196a46256d704
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate new unit gr/ctxsw_prog that provides interface to access
h/w header files hw_ctxsw_prog_*.h
Add below chip specific files that access above h/w unit and provide
interface through g->ops.gr.ctxsw_prog.*() HAL for rest of the units
common/gr/ctxsw_prog/ctxsw_prog_gm20b.c
common/gr/ctxsw_prog/ctxsw_prog_gp10b.c
common/gr/ctxsw_prog/ctxsw_prog_gv11b.c
Remove all the h/w header includes from rest of the units and code.
Remove direct calls to h/w headers ctxsw_prog_*() and use HALs
g->ops.gr.ctxsw_prog.*() instead
In gr_gk20a_find_priv_offset_in_ext_buffer(), h/w header
ctxsw_prog_extended_num_smpc_quadrants_v() is only defined on gk20a
And since we don't support gk20a remove corresponding code
Add missing h/w header ctxsw_prog_main_image_pm_mode_ctxsw_f() for
some chips
Add new h/w header ctxsw_prog_gpccs_header_stride_v()
Jira NVGPU-1526
Change-Id: I170f5c0da26ada833f94f5479ff299c0db56a732
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1966111
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the nvgpu_sgt code out from the nvgpu_mem code. Although the
two chunks of code are related the SGT code is distinct and as
such should be its own unit. To do this a new source file has been
added - nvgpu_sgt.c - which contains all the nvgpu_sgt common APIs.
These are the facade APIs to abstract the actual details of how any
given nvgpu_sgt is actually implemented.
An abstract unit - nvgpu_sgt_os - was also defined. This unit
exists solely for the nvgpu_sgt unit to call so that the OS
specific nvgpu_sgt_os_create_from_mem() API can be moved from the
common nvgpu_sgt unit. Note this also updates the name of what the
OS specific units are expected to call. Common code may still use
the generic nvgpu_sgt_create_from_mem() API.
JIRA NVGPU-1391
Change-Id: I37f5b2bbf9f84c0fb6bc296c3e04ea13518bd4d0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1946012
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-15.6 requires that all if-else blocks and loop blocks
be enclosed in braces, including single statement blocks. Fix errors
due to single statement if-else and loop blocks without braces
by introducing the braces.
JIRA NVGPU-775
Change-Id: Ib70621d39735abae3fd2eb7ccf77f36125e2d7b7
Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1928745
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in GPU specific files.
JIRA NVGPU-1036
Change-Id: Iefadc38bdbea4f02de3c24b6ad1c71d6eb0af4bd
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929903
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All the netlist parsing code is currently under GR unit, but netlist
ucode parsing does not really have any logical dependency to GR
Hence separate out a new unit common/netlist/ that parses the netlist
image and stores/exposes its content through netlist_vars structure
Structure nvgpu_netlist_vars is added to structure gk20a
Move netlist parsing code to common/netlist/netlist.c and chip
specific files to common/netlist/netlist_<chip>.c
Move simulation netlist parsing to common/netlist/netlist_sim.c
Rename g.ops.gr_ctx HAL to g.ops.netlist
Rename all the exported structures to be in the form of nvgpu_*
Rename all exported functions to be in the form of nvgpu_netlist_*()
Add netlist initialization to GPU boot path, and add deinitialization
to GPU remove path
Jira NVGPU-1317
Change-Id: I9af86e3b3230a89db5260cc8ed96ff5f72938c9a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1936454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce the size of memory allocations in the channel debug dump by
capturing only the necessary values from the instance block. This also
simplifies the allocation path slightly with the downside of having to
add a capture_channel_ram_dump HAL for reading the interesting parts
explicitly beforehand to the now smaller staging buffer.
Also rename struct ch_state to struct nvgpu_channel_dump_info.
Jira NVGPU-886
Change-Id: I5d7518d9d474b0b728b183383bc83d89ecf91b98
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1928207
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
