- This patch enables HWPM Mode-E context switch for gv11b.
- Write new pm mode to context buffer header. Ucode use
this mode to enable mode-e context switch. This is Mode-B
context switch of PMs with Mode-E streamout on one context.
If this mode is set, Ucode makes sure that Mode-E pipe
(perfmons, routers, pma) is idle before it context switches PMs.
- This allows us to collect counters in a secure way
(i.e. on context basis) with stream out.
- For Mode-E ctxsw it is required that engine_sel
is set to 0xFFFFFFFF.
- Default 0 is a valid signal and causes problems.
Bug 2106999
Change-Id: Idc6380116a71ffd7ae348ceec68cb395b2eca5f6
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1818070
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_acr to hold acr module related member
within single struct which are currently spread across multiple structs
like nvgpu_pmu, pmu_ops & gk20a.
-Created struct hs_flcn_bl struct to hold ACR HS bootloader specific members
-Created struct hs_acr to hold ACR ucode specific members like bootloader data
using struct hs_flcn_bl, acr type & falcon info on which ACR ucode need to run.
-Created acr ops under struct nvgpu_acr to perform ACR specific operation,
currently ACR ops were part PMU which caused to have always dependence
on PMU even though ACR was not executing on PMU.
-Added acr_remove_support ops which will be called as part of
gk20a_remove_support() method, earlier acr cleanup was part of
pmu remove_support method.
-Created define for ACR types,
-Ops acr_sw_init() function helps to set ACR properties
statically for chip currently in execution & assign ops to point to
needed functions as per chip.
-Ops acr_sw_init execute at early as nvgpu_init_mm_support calls acr
function to alloc blob space.
-Created ops to fill bootloader descriptor & to patch WPR info to ACR uocde
based on interfaces used to bootstrap ACR ucode.
-Created function gm20b_bootstrap_hs_acr() function which is now common
HAL for all chips to bootstrap ACR, earlier had 3 different function for
gm20b/gp10b, gv11b & for all dgpu based on interface needed.
-Removed duplicate code for falcon engine wherever common falcon code can be used.
-Removed ACR code dependent on PMU & made changes to use from nvgpu_acr.
JIRA NVGPU-1148
Change-Id: I39951d2fc9a0bb7ee6057e0fa06da78045d47590
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813231
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Removed ACR support code from PMU module
- Deleted ACR related ops from pmu ops
- Deleted assigning of ACR related ops
using pmu ops during HAL init
-Removed code related to ACR bootstrap &
dependent code for all chips.
JIRA NVGPU-1147
Change-Id: I47a851a6b67a9aacde863685537c34566f97dc8d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817990
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch constructs clk_arbiter specific code for gp10b as well as
gv11b and does the necessary plumbing in the clk_arbiter code. The
changes made are as follows.
1) Constructed clk_arb_gp10b.* files which add support for clk_arb
related HALS including the nvgpu_clk_arb_init and nvgpu_clk_arb_cb.
This doesn't have support for debugfs nor the VFUpdateEvent yet and
consequently no support for arb->notifications.
2) Added gpcclk specific variables corresponding to every gpc2clk in
a given clk_arb related struct.
3) Linux specific support_clk_freq_controller is assigned true in
platform_gp10b.c and platform_gv11b.c files.
4) Incremented the clk_arb_worker.put atomic variable during
worker_deinit so as to allow the worker thread to be stopped.
5) Added the flag clk_arb_events_supported as part of struct
nvgpu_clk_arb. This flag is used to selectively account for the extra
refcounting present in OS specific code i.e.
nvgpu_clk_arb_commit_request_fd. For igpus, the extra refcount is
reduced during nvgpu_clk_arb_release_completion_dev.
Bug 2061372
Change-Id: Id00acb106db2b46e55aa0324034a16a73723c078
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774281
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move implementation of MC HAL to common/mc. Also bump gk20a
implementation to gm20b.
gk20a_mc_boot_0 was used via a HAL, but we have only one possible
implementation. It also has to be anyway called directly to detect
which HALs to assign, so make it a true common function.
mc_gk20a_handle_intr_nonstall was also used only in os/linux/intr.c
so move it there.
JIRA NVGPU-954
Change-Id: I79aedc9158f90d578db0edc17b714617b52690ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813519
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below regops HALs are not being called from anywhere, so remove them
gops.regops.get_runcontrol_whitelist_ranges()
gops.regops.get_runcontrol_whitelist_ranges_count()
gops.regops.get_qctl_whitelist_ranges()
gops.regops.get_qctl_whitelist_ranges_count()
HAL gops.regops.apply_smpc_war() is unimplemented for all the chips, and it
was originally only needed for gk20a which is not unsupported
So remove this HAL and its call too
Jira NVGPU-620
Change-Id: Ia2c74883cd647a2e94ee740ffd040a40c442b939
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In nvgpu repository, we have multiple accesses to methods in
pmu_gk20a.h which have register accesses. Instead of directly invoking
these methods, these are now called via HALs. Some common methods such
as pmu_wait_message_cond which donot have any register accesses
are moved to pmu_ipc.c and the method declarations are moved
to pmu.h. Also, changed gm20b_pmu_dbg to
nvgpu_dbg_pmu all across the code base. This would remove all
indirect dependencies via gk20a.h into pmu_gk20a.h. As a result
pmu_gk20a.h is now removed from gk20a.h
JIRA-597
Change-Id: Id54b2684ca39362fda7626238c3116cd49e92080
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1804283
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move implementation of fuse HAL to common/fuse. Also implements new
fuse query functions for FBIO, FBP, TPC floorsweeping and security
fuses.
JIRA NVGPU-957
Change-Id: I55e256a4f1b59d50a721d4942907f70dc57467c4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797177
Move implementation of priv_ring HAL to common/priv_ring. Implement
two new HAL APIs to remove illegal dependencies: enable_priv_ring and
enum_ltc.
As enum_ltc can be implemented only gm20b onwards, bump gk20a
implementation to base on gm20b.
JIRA NVGPU-964
Change-Id: I160c2216132aadbcd98bb4a688aeeb2c520a9bc0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797025
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now define HAL exec_reg_ops() under gops.dbg_session_ops operations
But we have separate gops.regops operations for all the regops and this would
be logically correct place for exec_reg_ops()
Move exec_reg_ops() from gops.dbg_session_ops to gops.regops
Also rename it to exec_regops()
Jira NVGPU-620
Change-Id: If4f70639ffbc892c605f7540a83bce12ed821b52
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1794999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
clk_arb.h and gk20a.h has circular dependencies to each other. This is
removed by forward declaring struct gk20a in clk_arb.h and removing the
header gk20a.h from clk_arb.h and similarly forward declaring struct
nvgpu_clk_arb in gk20a.h and removing the header clk_arb.h from gk20a.h
alongwith putting headers in every execution unit which calls clk_arb.h
related methods.
JIRA NVGPU-597
Change-Id: I7cedca17206c148b21d93e5d7f0d88c2f98b979a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1790915
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
once gpu is powered off i.e. power_on set to false, nvgpu isr
does not handle stall/nonstall irq. Depending upon state
of gpu, this can result in either of following errors:
1) irq 458: nobody cared (try booting with the "irqpoll" option)
2) "HSM ERROR 42, GPU" from SCE if it detects that an interrupt is
not in time.
Fix these by masking all interrupts just before gpu power off
as nvgpu won't be handling any irq anymore.
While masking interrupts, if there are any pending interrupts,
then report those with a log message.
Bug 1987855
Bug 200424832
Change-Id: I95b087f5c24d439e5da26c6e4fff74d8a525f291
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1770802
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added debugfs node under ltc directory with name:
intr_illegal_compstat_enable
Enabling/disabling of ltc_illegal_compstat intr is
possible through debugfs node.
Since ltc state is lost with rail gate, this setting is
cached and will be populated during ltc initialization.
Bug 2099406
Change-Id: I4bf62228dfd2bbb94f87f923f9f4f6e5ad0b07f0
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774683
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- adds static tpc-powergating through sysfs.
- active tpc count will remain till the GPU/systems is not booted again.
- tpc_pg_mask can be written only after GPU probe finishes and
GPU boot is triggered.
Note:
To be able to use this feature, we need to change boot/init
scripts of the OS(used with nvgpu driver) to write to sysfs nodes before
posting discover image size query to FECS.
Bug 200406784
Change-Id: Id749c7a617422c625f77d0c1a9aada2eb960c4d0
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1742422
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FB fault buffer is enabled on finalize poweron. Disable the buffer
in prepare poweroff. This also eliminates the need to disable
the buffer in fault info mem destroy which otherwise accesses
GPU registers after these are locked in prepare poweroff.
Bug 200427479
Change-Id: I1ca3e6ed4417847731c09b887134f215a2ba331c
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1776387
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- create common file common/ecc.c which include common functions for add
ecc counters and remove counters.
- common code will create a list of all counter which make it easier to
iterate all counters.
- Add chip specific file for adding ecc counters.
- add linux specific file os/linux/ecc_sysfs.c to export counters to
sysfs.
- remove obsolete code
- MISRA violation for using snprintf is not solved, tracking with
jira NVGPU-859
Jira NVGPUT-115
Change-Id: I1905c43c5c9b2b131199807533dee8e63ddc12f4
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1763536
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-During teardown issue runlist preempt
-preempt_ch_tsg hal is removed as it is no more required.
This hal was added to be called from teardown so that if
there is preempt timeout, preempt timeout recovery is not
triggered.
Bug 200426402
Change-Id: I679e3306aa890ff0cfa211cfcc7d5405b7cb1211
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1775443
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved gv11b_detect_ecc_enabled_units function
from gv11b.c to gr_gv11b.c, as this is being
used only in gr_gv11b file.
In order to avoid GR code touching fuse registers,
as it need to include fuse HW headers in GR code,
introduced two fuse HALs which are being called
from GR code. is_opt_ecc_enable for checking
whether ecc enable bit is set in fuse register
and is_opt_feature_overide_disable for checking
whether feature override disable bit is set in
fuse register.
Initialized fuse HAL functions for chips that
make use of those HAL functions.
JIRA NVGPU-615
Change-Id: Iafe5a3940bb19cb3da51e270403450b63c2f67a3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1775564
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
mm_gv11b.c has several direct calls to fb_gv11b.h. Redirect them to
go via a HAL. Also make sure the HALs are using parameter with
correct signedness and prefix the parameter constants with
NVGPU_FB_MMU_.
MMU buffer table indices were also defined in fb_gv11b.h, even though
the tables themselves are defined in include/nvgpu/mm.h. Move the
indices to include/nvgpu/mm.h and prefix them with NVGPU_MM_MMU_.
JIRA NVGPU-714
Change-Id: Ieeae7c5664b8f53f8313cfad0a771d14637caa08
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1776131
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move queries of FB MMU configuration to FB HAL. Also use g->ltc_count
instead of reading the number of LTCs from FB. These changes together
remove last direct uses of FB registers from GR.
JIRA NVGPU-714
Change-Id: I1b4b46fc2f636f5c1904e4174040a47a27948999
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1773076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.fb.mmu_invalidate_replay() to invalidate replay mmu fault
Use existing API gv11b_fb_mmu_invalidate_replay() to set to this HAL on all
Volta chips
Bug 2228914
Jira NVGPU-838
Jira NVGPUT-73
Change-Id: I394901857d41499f3ea44023393fe271fb664260
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1767970
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_find_priv_offset_in_buffer() we right now calculate
offset of a register in gpccs segment based on register address type
Separate out sequence to find offset in gpccs segment and move it to new API
gr_gk20a_get_offset_in_gpccs_segment()
Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API
to this HAL
Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct
API
Jira NVGPUT-118
Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761669
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
membar.sys does synchronization with the whole system (GPU and CPU),
membar.gl does synchronization within the GPU.
In gv11b, fb flush is generating membar.gl instead of membar.sys, which
is an issue. To fix this issue. following WAR is used:
1. Use bar1 engine id and bind it to a particular pdb,
2. Then instead of a fb_flush, issue a tlb invalidate of the bar1 pdb.
Now allocation of vm for bar1 instance block and bar1 binding is done
without check for bar1 support. Only bar1 register mapping is done
based on bar1 support enabled.
Bug 2112790
Change-Id: I76f43f1178a68f10823d48bc9da55d2bd686dd52
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1750257
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- removed inclusion of linux includes.
- replaced with nvgpu/*.h's
- reformated the function signature of
"css_hw_get_pending_snapshot" and
"css_hw_get_overflow_status" be global instead of
static.
- added get_pending_snapshot and get_overflow_status
to ops->css.
JIRA: VQRM-3699
Change-Id: I177904c263e143b414924c2c28ad6fd3cfd00132
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1732783
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below HALs to setup mmu_fault configuration registers and to read
information registers and set them on Volta
gops.fb.write_mmu_fault_buffer_lo_hi()
gops.fb.write_mmu_fault_buffer_get()
gops.fb.write_mmu_fault_buffer_size()
gops.fb.write_mmu_fault_status()
gops.fb.read_mmu_fault_buffer_get()
gops.fb.read_mmu_fault_buffer_put()
gops.fb.read_mmu_fault_buffer_size()
gops.fb.read_mmu_fault_addr_lo_hi()
gops.fb.read_mmu_fault_inst_lo_hi()
gops.fb.read_mmu_fault_info()
gops.fb.read_mmu_fault_status()
Jira NVGPUT-13
Change-Id: Ia99568ff905ada3c035efb4565613576012f5bef
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1744063
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On t186, ucode expects physical address to be
programmed for FECS trace buffer.
- On t194, ucode expects GPU VA to be programmed
for FECS trace buffer. This patch adds extra
support to handle this change for linux native.
- Increase the size of FECS trace buffer (as few
entries were getting dropped due to overflow of
FECS trace buffer.)
- This moves FECS trace buffer handling in global
context buffer.
- This adds extra check for updation of mailbox1
register. (Bug 200417403)
EVLR-2077
Change-Id: I7c3324ce9341976a1375e0afe6c53c424a053723
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1536028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The WPR will be divided into several sub-WPRs,
one for each Falcon and one common for sharing
between Falcons which bootstrap falcons
- Defined & used flag NVGPU_SUPPORT_MULTIPLE_WPR
to know M-WPR support.
- Added struct lsfm_sub_wpr to hold subWPR header info
- Added struct lsf_shared_sub_wpr_header to hold subWPR
info & copied to WPR blob after LSF_WPR_HEADER
- Set NVGPU_SUPPORT_MULTIPLE_WPR to false for gp106,
gv100 & gv11b.
- Added methods to support to multiple WPR support &
called by checking flag NVGPU_SUPPORT_MULTIPLE_WPR
in ucode blob preparation flow.
JIRA NVGPUTU10X / NVGPUT-99
Change-Id: I81d0490158390e79b6841374158805f7a84ee6cb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
