Pascal has support for more comptags than Maxwell, but we were using
gm20b definitions for cbc_ctrl on all chips. Specifically field
clear_upper_bound is one bit wider in Pascal.
Implement gp10b version of cbc_ctrl and take that into use in Pascal
and Volta.
Bug 200381317
Change-Id: I7d3cb9e92498e08f8704f156e2afb34404ce587e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1642574
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added sw method support for SET_BES_CROP_DEBUG4.
In this sw method:
CLAMP_FP_BLEND_TO_MAXVAL forces overflow and
CLAMP_FP_BLEND_TO_INF blend results to clamp to FP maxval.
Added support for this sw method in gp10b/gp106/gv11b
and gv100.
Bug 2046636
Change-Id: I3a9e97587aca76718f7f504ea3b853f87409092a
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1641529
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add HAL for dumping ctxsw statistics. The statistics are dependent on
the architecture, and the function that calls this operation needs to
be moved to gk20a.
Bug 1842197
Change-Id: I285c74b8ddc8c7854c85b3fef4cbfc582098919e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1632681
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Used chip specific attrib_cb_gfxp_default_size and
attrib_cb_gfxp_size buffer sizes during committing
global callback buffer when gfx preemption is requested.
These sizes are different for gv11b from gp10b.
For gp10b used smaller buffer sizes than specified
value in hw manuals as per sw requirement.
Also used gv11b specific preemption related functions:
gr_gv11b_set_ctxsw_preemption_mode
gr_gv11b_update_ctxsw_preemption_mode
This is required because preemption related buffer
sizes are different for gv11b from gp10b. More optimization
will be done as part of NVGPU-484.
Another issue fixed is: gpu va for preemption buffers
still needs to be 8 bit aligned, even though 49 bits
available now. This done because of legacy implementation
of fecs ucode.
Bug 1976694
Change-Id: I2dc923340d34d0dc5fe45419200d0cf4f53cdb23
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1635027
GVS: Gerrit_Virtual_Submit
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit caf168e33e.
Might be causing an intermittency in quill-c03 graphics submit. Super
weird since the only change that seems like it could affect it is the
header file update but that seems rather safe.
Bug 2044830
Change-Id: I14809d4945744193b9c2d7729ae8a516eb3e0b21
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1634349
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Timo Alho <talho@nvidia.com>
Tested-by: Timo Alho <talho@nvidia.com>
Used chip specific attrib_cb_gfxp_default_size and
attrib_cb_gfxp_size buffer sizes during committing
global callback buffer when gfx preemption is requested.
These sizes are different for gv11b from gp10b.
Also used gv11b specific preemption related functions:
gr_gv11b_set_ctxsw_preemption_mode
gr_gv11b_update_ctxsw_preemption_mode
This is required because preemption related buffer
sizes are different for gv11b from gp10b. More optimization
will be done as part of NVGPU-484.
Another issue fixed is: gpu va for preemption buffers
still needs to be 8 bit aligned, even though 49 bits
available now. This done because of legacy implementation
of fecs ucode.
Bug 1976694
Change-Id: I284e29e0815d205c150998b07d0757b5089d3267
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1630520
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Tested-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, update thermal settings as per hw POR:
1.Created gv11b specific HAL for init_therm_setup_hw
2.Update steps for gradual slowdown to 1x,1.5x,2x,4x,8x,16x,32x.
3.Modified gradual step duration cycles to 4.
Bug 200365110
Change-Id: I93c28a3394857aacdf3d304103c9e7c25d4ad344
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1616600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Check the availability of ecc units by checking
relevant ecc fuse and fuse overrides.
During gpu boot, initialize ecc units by scrubbing
individual ecc units available. ECC initialization
should be done before gr initialization.
Following ecc units are scrubbed:
SM LRF
SM L1 DATA
SM L1 TAG
SM CBU
SM ICACHE
Bug 200339497
Change-Id: I54bf8cc1fce639a9993bf80984dafc28dca0dba3
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1612734
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use NVGPU_DMA_FORCE_CONTIGUOUS for non-wpr blob alloc.
CPU writes some data to non WPR blob (sysmem). ACR binary executing
from PMU, first copies that data to DMEM and then copies that data into WPR.
Without NVGPU_DMA_FORCE_CONTIGUOUS, secure boot fails due to ACR writing
wrong bootloader data to PMU DMEM.
Bug 200355756
Change-Id: I18982caff62b2e7cbe64ea98c1bb935496cfe91c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1610491
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add an alignment check for compressible-kind fixed-address
mappings. If we're using page size smaller than the comptag line
coverage window, the GPU VA and the physical buffer offset must be
aligned in respect to that window.
Bug 1995897
Bug 2011640
Bug 2011668
Change-Id: If68043ee2828d54b9398d77553d10d35cc319236
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1606439
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, configured gfx preemption wfi timeout in usec.
Set timeout unit as usec in gr_gv11b_init_preemption_state.
Used default timeout as 1msec and this timeout value can
be modified through sysfs node:
/sys/devices/gpu.0/gfxp_wfi_timeout_count
For gp10b:
gfxp_wfi_timeout_count is in syclk cycles
For gv11b:
gfxp_wfi_timeout_count is in usec
Bug 2003668
Change-Id: I68d52ce996a83df90b8b3a8164debb07e5cb370f
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL is as part of phased changes to support NO LSPMU
Changes done are to add new pmu ops :
- setup_apertures
- update_lspmu_cmdline_args
These would be called from pmu op init_falcon_setup_hw
JIRA NVGPU-296
Change-Id: Idbcec5c93ca3150df5c9fb81d65b9fce778cecb8
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589004
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-New fuse ops is added to set NVGPU_SEC_PRIVSECURITY
and NVGPU_SEC_SECUREGPCCS bits in g->enabled_flags
during hal initialization
-For igpu non simulation platforms, fuses are read
to decide if gpu should be allowed to boot or not.
--Do not boot gpu if priv_sec_en is set but wpr_enabled
is not set to 1 or vpr_auto_fetch_disable is not set to 0
--With priv_sec_en set, all falcons have to boot
in LS mode and this needs wpr_enabled set to 1
AND vpr_auto_fetch_disable set to 0. In this case
gmmu tries to pull wpr and vpr settings from tegra mc
Bug 2018223
Change-Id: Iceaa1b0b3214e9a3d6cef5d77a82e034302f748b
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1595454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gv11b_init_uncompressed_kind_map(), gv11b_init_kind_attr(), and
the related kind setup code. They are not needed anymore.
While we're doing these changes, remove a redundant assignment of
g->bootstrap_owner in hal_gv100.c.
Bug 1902982
Change-Id: Ib40d8f55cfbfa34143a3765c2b4913926ca021fd
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560931
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move fuse override DT handling to Linux code. All the chip specific
fuse override functions did the same thing, so delete the HAL and
call the same function to read the DT overrides on all chips.
Also remove the fuse override functionality from dGPU. There are no
DT entries for PCIe devices, so it would've failed anyway.
JIRA NVGPU-259
Change-Id: Ic672e25090cdfc207d9771ab61b6cf53185113a4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- in the native case, replace calls for init_cyclestats with
the gm20b version, as each chip had identical versions of the code.
- in the virtual case, use the vgpu version of the function in order
to get the new max_css_buffer_size characteristic set to the mempool
size.
JIRA ESRM-54
Bug 200296210
Change-Id: I475876cb392978fb1350ede58e37d0962ae095c3
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1578934
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For SCG to work, smid numbering needs to be done
based on scg performance of tpcs. For gv11b and
gv11b vgpu, reuse gv100 function "gr_gv100_init_sm_id_table"
to do this.
Used local variable "index" to avoid multiple computations in
the function: gr_gv100_init_sm_id_table
index = sm_id + sm
Add deug info for printing initialized gpc/tpc/sm/global_tpc
indexs.
Bug 1842197
Change-Id: Ibf10f47f10a8ca58b86c307a22e159b2cc0d0f43
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1583916
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added method to load mem unlock binary into
nvdec falcon & execute to perform mem unlock
if VPR enabled.
- Updated .mem_unlock gv100 HAL to point
method gv100_fb_memory_unlock().
- Updated .mem_unlock gv11b HAL to NULL.
- Added vpr info hw registers
- Added nvdec enable hw register
Change-Id: Ia4bf820ae103baede679d300d1d390fd748c919a
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
(cherry picked from commit 2e176ad9d47316bf4d001692a2ae07e6c1fb1ccb)
Reviewed-on: https://git-master.nvidia.com/r/1573101
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Updated following hal functions for css gv11b and reused
them for gv100:
enable_snapshot
disable_snapshot
check_data_available
These changes are needed because of following reasons:
1. Register offsets for perf_pmasys_* are changed
for gv11b/gv100 from gk20a.
2. Updated memory type for perf_pmasys_mem_block_target
based on memory aperture used for hwpm inst_block.
Bug 200327596
Change-Id: I500d17670e2f389d8d0e77884374bcc3504a41f8
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1507546
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Change required for equivalent change on nvgpu. This is required
since a few HALs were added that must be populated for all chips.
This patch adds those HAL definitions for gv11b, gv100, and the
vgpu.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: I65374764350a5cacce8624b15d98947fada35a4a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1579865
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Updated following hal functions for gv11b and reused
them for gv100:
perfbuffer_enable
perfbuffer_disable
These changes are needed because of following reasons:
1. Register offsets for perf_pmasys_* are changed
for gv11b/gv100 from gk20a.
2. Updated memory type for perf_pmasys_mem_block_target
to sys_ncoh_f().
Bug 200327596
Change-Id: Ia672ac561917c8ed36caea9cc7e74b7fc7ce8188
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1571074
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Instead of calling the native HAL init function then adding
multiple layers of modification for VGPU, flatten out the sequence
so that all entry points are set statically and visible in a
single file.
JIRA ESRM-30
Change-Id: I8d277aaccb0e63b2d504e7aba32eb31ef82f4ec0
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574619
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We right now call gk20a_fifo_tsg_unbind_channel_verify_status() to verify
channel status while unbinding a channel from TSG while closing
Add support to do this verification per-platform and keep this disabled
for vgpu platforms
Bug 200327095
Change-Id: I6e2a6a09c784d24ac49477d5450b7d4b671878e3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1572369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API gv11b_fifo_tsg_verify_status_faulted() and use that as
g->ops.fifo.tsg_verify_status_faulted operation for gv11b/gv100
This API will check if channel has ENG_FAULTED status set, if yes it will clear
CE method buffer in case saved out channel is same as faulted channel
We need to write 0 to method count to invalidate CE method buffer
Also set g->ops.fifo.tsg_verify_status_ctx_reload operation for gv11b/gv100
Bug 200327095
Change-Id: I9d2b0f13faf881b30680219bbcadfd4969c4dff6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560643
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add TSG enable/disable operations for gv11b/gv100
To disable a TSG we continue to use gk20a_disable_tsg()
To enable a TSG add new API gv11b_fifo_enable_tsg() since TSG enable sequence is
different for Volta than previous versions
For Volta it is sufficient to loop over all the channels in TSG and enable them
sequentially
Bug 1739362
Change-Id: Id4b4684959204c6101ceda83487a41fbfcba8b5f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560642
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
