The value of NV_PERF_PMASYS_MEM_BUMP is different for Volta
and NVGPU_IOCTL_CHANNEL_CYCLE_STATS_SNAPSHOT_CMD_FLUSH did not
have correct behavior on GV11B due to that.
The patch adds an instance of css_hw_set_handled_snapshots
for Volta to fix that.
The patch also renames css_hw_set_handled_snapshots
to gk20a_css_hw_set_handled_snapshots to make it more clear
that the function is arch dependent.
Bug 1960846
Change-Id: I92c35a862ecd7f918dd1458c086fc7ae42ca8fc5
Signed-off-by: Martin Radev <mradev@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662427
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add User space API NVGPU_AS_IOCTL_GET_SYNC_RO_MAP to get read-only syncpoint
address map in user space
We already map whole syncpoint shim to each address space with base address
being vm->syncpt_ro_map_gpu_va
This new API exposes this base GPU_VA address of syncpoint map, and unit size
of each syncpoint to user space.
User space can then calculate address of each syncpoint as
syncpoint_address = base_gpu_va + (syncpoint_id * syncpoint_unit_size)
Note that this syncpoint address is read_only, and should be only used for
inserting semaphore acquires.
Adding semaphore release with this address would result in MMU_FAULT
Define new HAL g->ops.fifo.get_sync_ro_map and set this for all GPUs supported
on Xavier SoC
Bug 200327559
Change-Id: Ica0db48fc28fdd0ff2a5eb09574dac843dc5e4fd
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1649365
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The message to tell RM server to unbind channel has to be sent after
client unbinds the channel and before client calls tsg release. The
channel has to belong to a tsg on RM server before client submit a
runlist to remove the channel. Or there's a bare channel problem.
By moving .tsg_unbind_channl one layer lower, gk20a_tsg_unbind_channel()
will be common functions for all chip, and it'll call tsg release after
call .tsg_unbind_channel. So vgpu won't need to worry about tsg was
released before sending msg to RM server.
Bug 200382695
Bug 200382785
Change-Id: I32acc122f3f9d5d0628049ccf673225f9e90c87a
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1645383
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pascal has support for more comptags than Maxwell, but we were using
gm20b definitions for cbc_ctrl on all chips. Specifically field
clear_upper_bound is one bit wider in Pascal.
Implement gp10b version of cbc_ctrl and take that into use in Pascal
and Volta.
Bug 200381317
Change-Id: I7d3cb9e92498e08f8704f156e2afb34404ce587e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1642574
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add HAL for dumping ctxsw statistics. The statistics are dependent on
the architecture, and the function that calls this operation needs to
be moved to gk20a.
Bug 1842197
Change-Id: I285c74b8ddc8c7854c85b3fef4cbfc582098919e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1632681
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add an alignment check for compressible-kind fixed-address
mappings. If we're using page size smaller than the comptag line
coverage window, the GPU VA and the physical buffer offset must be
aligned in respect to that window.
Bug 1995897
Bug 2011640
Bug 2011668
Change-Id: If68043ee2828d54b9398d77553d10d35cc319236
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1606439
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, configured gfx preemption wfi timeout in usec.
Set timeout unit as usec in gr_gv11b_init_preemption_state.
Used default timeout as 1msec and this timeout value can
be modified through sysfs node:
/sys/devices/gpu.0/gfxp_wfi_timeout_count
For gp10b:
gfxp_wfi_timeout_count is in syclk cycles
For gv11b:
gfxp_wfi_timeout_count is in usec
Bug 2003668
Change-Id: I68d52ce996a83df90b8b3a8164debb07e5cb370f
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL is as part of phased changes to support NO LSPMU
Changes done are to add new pmu ops :
- setup_apertures
- update_lspmu_cmdline_args
These would be called from pmu op init_falcon_setup_hw
JIRA NVGPU-296
Change-Id: Idbcec5c93ca3150df5c9fb81d65b9fce778cecb8
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589004
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-New fuse ops is added to set NVGPU_SEC_PRIVSECURITY
and NVGPU_SEC_SECUREGPCCS bits in g->enabled_flags
during hal initialization
-For igpu non simulation platforms, fuses are read
to decide if gpu should be allowed to boot or not.
--Do not boot gpu if priv_sec_en is set but wpr_enabled
is not set to 1 or vpr_auto_fetch_disable is not set to 0
--With priv_sec_en set, all falcons have to boot
in LS mode and this needs wpr_enabled set to 1
AND vpr_auto_fetch_disable set to 0. In this case
gmmu tries to pull wpr and vpr settings from tegra mc
Bug 2018223
Change-Id: Iceaa1b0b3214e9a3d6cef5d77a82e034302f748b
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1595454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
TSG/CHANNEL_SET_PRIORITY IOCTLs are deprecated and user space should be using
combination of timeslice and interleave levels to decide the priority
Hence remove the IOCTLs and all corresponding APIs
Jira NVGPU-393
Change-Id: I7cf0785689269536eca0c278c774b0e9e74f8c2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598581
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Since NVGPU_AS_MAP_BUFFER_FLAGS_DIRECT_KIND_CTRL was made mandatory,
kernel does not need to know the details about the PTE kinds
anymore. Thus, we can remove the kind_gk20a.h header and the code
related to kind table setup, as well as simplify buffer mapping code
a bit.
Bug 1902982
Change-Id: Iaf798023c219a64fb0a84da09431c5ce4bc046eb
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560933
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move fuse override DT handling to Linux code. All the chip specific
fuse override functions did the same thing, so delete the HAL and
call the same function to read the DT overrides on all chips.
Also remove the fuse override functionality from dGPU. There are no
DT entries for PCIe devices, so it would've failed anyway.
JIRA NVGPU-259
Change-Id: Iba64a5d53bf4eb94198c0408a462620efc2ddde4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593687
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the ctxsw trace "core" API code into <nvgpu/ctxsw_trace.h>. This
is not perect though since there's some Linuxisms present in the HAL
and as such that code has to be hidden by the ctxsw tracing CONFIG. But
this patch should work for QNX such that it will allow the code to
build as long as CONFIG_GK20A_CTXSW_TRACE is not set.
Also fix the copywrite notice in the ctxsw code present under
common/linux to be GPL.
JIRA NVGPU-287
Change-Id: I94715864caf335b7220185492e4629d713b025e0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589429
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Migrate ctxsw_trace_gk20a.c to common/linux/ctxsw_trace.c. This
has been done becasue the ctxsw tracing code is currently too
tightly tied to the Linux OS due to usage of a couple system calls:
- poll()
- mmap()
And general Linux driver framework code. As a result pulling the
logic out of the FECS tracing code is simply too large a scope for
time time being.
Instead the code was just copied as much as possible. The HAL ops
for the FECS code was hidden behind the FECS tracing config so
that the vm_area_struct is not used when QNX does not define said
config. All other non-HAL functions called by the FECS ctxsw
tracing code ha now also been hidden by this config. This is not
pretty but for the time being it seems like the way to go.
JIRA NVGPU-287
Change-Id: Ib880ab237f4abd330dc66998692c86c4507149c2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1586547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add max_css_buffer_size to gpu characteristics. In the virtual
case, the size of the cycle stats snapshot buffer is constrained
by the size of the mempool shared between the guest OS and the
RM server, so tools need to find out what is the maximum size
allowed.
In the native case, we return 0xffffffff to indicate
that the buffer size is unbounded (subject to memory availability),
in the virtual case we return the size of the mempool.
Also collapse native init_cyclestats functions to a single version,
as each chip had identical versions of the code.
JIRA ESRM-54
Bug 200296210
Change-Id: I71764d32c6e71a0d101bd40f274eaa4bea3e5b11
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1578930
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now initialize czf_bypass value in gr_gp10b_init_preemption_state()
which is run at every rail ungate
And that results in any user specified value through sysfs getting lost after
railgate
To fix this, move initialization of czf_bypass to gk20a_init_gr_setup_sw() so
that it gets initialized only once
Add new HAL g->ops.gr.init_czf_bypass to initialize same and define it for
gp10b/gp106/vgpu-gp10b
Bug 2008262
Change-Id: I80a38ef527c86e32c6d64d0626b867239db9ea51
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1585224
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move much of the remaining generic MM code to a new common location:
common/mm/mm.c. Also add a corresponding <nvgpu/mm.h> header. This
mostly consists of init and cleanup code to handle the common MM
data structures like the VIDMEM code, address spaces for various
engines, etc.
A few more indepth changes were made as well.
1. alloc_inst_block() has been added to the MM HAL. This used to be
defined directly in the gk20a code but it used a register. As a
result, if this register hypothetically changes in the future,
it would need to become a HAL anyway. This path preempts that
and for now just defines all HALs to use the gk20a version.
2. Rename as much as possible: global functions are, for the most
part, prepended with nvgpu (there are a few exceptions which I
have yet to decide what to do with). Functions that are static
are renamed to be as consistent with their functionality as
possible since in some cases function effect and function name
have diverged.
JIRA NVGPU-30
Change-Id: Ic948f1ecc2f7976eba4bb7169a44b7226bb7c0b5
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574499
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Created "mem_unlock" HAL under fb to support memory
unlock
- Called as part of gk20a_finalize_poweron() if memory unlock
support needed by checking HAL
- Assigned "mem_unlock" HAL to NULL for chips which don't
need memory unlocks.
Change-Id: I68d0910f15d293feaacfcbf6bd17ecccd3b5219d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
(cherry picked from commit 586894eb84860bbbe4c75dae4715bdf27432a480)
Reviewed-on: https://git-master.nvidia.com/r/1564703
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor the last nvgpu_vm functions from the mm_gk20a.c code. This
removes some usages of dma_buf from the mm_gk20a.c code, too, which
helps make mm_gk20a.c less Linux specific.
Also delete some header files that are no longer necessary in
gk20a/mm_gk20a.c which are Linux specific. The mm_gk20a.c code is now
quite close to being Linux free.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: I72b370bd85a7b029768b0fb4827d6abba42007c3
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1566629
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Instead of calling the native HAL init function then adding
multiple layers of modification for VGPU, flatten out the sequence
so that all entry points are set statically and visible in a
single file.
JIRA ESRM-30
Change-Id: Ie424abb48bce5038874851d399baac5e4bb7d27c
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574616
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now call gk20a_fifo_tsg_unbind_channel_verify_status() to verify
channel status while unbinding a channel from TSG while closing
Add support to do this verification per-platform and keep this disabled
for vgpu platforms
Bug 200327095
Change-Id: I19fab41c74d10d528d22bd9b3982a4ed73c3b4ca
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1572368
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename get_physical_addr_bits and related functions to something that
more clearly conveys what they are doing. The basic idea of these
functions is to translate from a physical GPU address to a IOMMU GPU
address. To do that a particular bit (that varies from chip to chip)
is added to the physical address.
JIRA NVGPU-68
Change-Id: I536cc595c4397aad69a24f740bc74db03f52bc0a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1542966
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added function to read WPR info from FB
MMU registers
- Added HAL to point wpr info read function
- Replaced wpr info read from MC with HAL
- Removed debugfs header include from acr files.
JIRA NVGPU-128
Change-Id: I5ebec46bfe03b9200f2aa569f2e5a780a715616d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1564683
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Initialize following counters in context header
for all legacy chips:
ctxsw_prog_main_image_num_save_ops
ctxsw_prog_main_image_num_restore_ops
This was already present in the code but move to a function
gk20a_gr_init_ctxsw_hdr_data, so that it can be re-used across
chips.
Additionally initialize following preemption related counters
for gp10b onwards in context header:
ctxsw_prog_main_image_num_wfi_save_ops
ctxsw_prog_main_image_num_cta_save_ops
ctxsw_prog_main_image_num_gfxp_save_ops
ctxsw_prog_main_image_num_cilp_save_ops
Bug 1958308
Change-Id: I0e45ec718a8f9ddb951b52c92137051b4f6a8c60
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1562654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
We right now remove a channel from TSG list and disable all the channels in
TSG while removing a channel from TSG
With this sequence if any one channel in TSG is closed, rest of the channels
are set as timed out and cannot be used anymore
We need to fix this sequence as below to allow removing a channel from active
TSG so that rest of the channels can still be used
- disable all channels of TSG
- preempt TSG
- check if CTX_RELOAD is set if support is available
if CTX_RELOAD is set on channel, it should be moved to some other channel
- check if FAULTED is set if support is available
- if NEXT is set on channel then it means channel is still active
print out an error in this case for the time being until properly handled
- remove the channel from runlist
- remove channel from TSG list
- re-enable rest of the channels in TSG
- clean up the channel (same as regular channels)
Add below fifo operations to support checking channel status
g->ops.fifo.tsg_verify_status_ctx_reload
g->ops.fifo.tsg_verify_status_faulted
Define ops.fifo.tsg_verify_status_ctx_reload operation for gm20b/gp10b/gp106
as gm20b_fifo_tsg_verify_status_ctx_reload()
This API will check if channel to be released has CTX_RELOAD set, if yes
CTX_RELOAD needs to be moved to some other channel in TSG
Remove static from channel_gk20a_update_runlist() and export it
Bug 200327095
Change-Id: I0dd4be7c7e0b9b759389ec12c5a148a4b919d3e2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560637
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add platform specific operations to enable/disable a TSG and use them instead
of directly calling enable/disable APIs
For gm20b/gp106/gp10b we continue to use gk20a_enable_tsg() and
gk20a_disable_tsg() as platform specific operations
Bug 1739362
Change-Id: I2dd0f38c8303757e8c7a47d8da0e30a790e514f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560635
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
NVGPU_SUBMIT_GPFIFO_FLAGS_RESCHEDULE_RUNLIST causes host to expire
current timeslice and reschedule from front of runlist.
This can be used with NVGPU_RUNLIST_INTERLEAVE_LEVEL_HIGH to make a
channel start sooner after submit rather than waiting for natural
timeslice expiration or block/finish of currently running channel.
Bug 1968813
Change-Id: I632e87c5f583a09ec8bf521dc73f595150abebb0
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: http://git-master/r/#/c/1537198
Reviewed-on: https://git-master.nvidia.com/r/1537198
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
gr sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: Ie37638f442fd68aca8a7ade5f297118447bdc91e
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1542989
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Although igpu does not have an FBPA unit, the hardware reports one, and
the ucode leaves space for one in the HWPM context save buffer. So
let NUM_FBPAS reflect this, so that registers that follow this section
in the context buffer are offset properly
JIRA EVLR-1716
Change-Id: I40105cf2ee7f92a44d1c7cc2d23a17276bbb9e84
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1535273
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
pmu sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I8839ac99e87153637005e23b3013237f57275c54
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530982
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
