nvgpu_engine_is_valid_runlist_id already iterates the list of
active engines, therefore the engine_id is already known to
be valid.
Remove call to nvgpu_engine_get_active_eng_info (which iterates
all engines), and fetch f->engine_info[engine_id] instead.
Also remove non-NULL test for engine_info, which could not
be true.
Also make sure to reset num_engines in nvgpu_cleanup_sw, to avoid
accessing uninitialized active_engines_list in unit test corner
cases (targetting init/remove support).
Jira NVGPU-4511
Change-Id: Ia6b904a7f3ca46e5097f06770b4caad317ec967b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2263618
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_engine_get_gr_runlist_id gets the first instance of
active GR engine using nvgpu_engine_get_ids. Therefore the
engine_id is already known to be valid.
Remove call to nvgpu_engine_get_active_eng_info (which iterates
all engines), and fetch f->engine_info[engine_id] instead.
Also remove non-NULL test for engine_info, which could not
be true.
Jira NVGPU-4511
Change-Id: Ifcc0851e3d14d862e2ed7b21ea57f17a66eca9dd
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2263617
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix bug where the CE mask includes other engine types besides just CEs
in nvgpu_ce_engine_interrupt_mask().
The intent of this API is to return mask of CE interrupts. However, the
if clause in the for loop is only excluding engine interrupts if the CE
stall or non-stall ISR is NULL. So, it does not distinquish between CE
or GR engine interrupts if the CE ISR is non-null.
Since the expectation is to not return CE interrupts if the ISRs are
NULL, just return a 0 mask if either ISR is NULL without having to
bother with the loop.
If the ISRs are set in the CE HAL, within the loop, only add interrupts
to the mask returned if the engine type is actually a CE engine (i.e. do
not include GR engine interrupts).
JIRA NVGPU-2224
Change-Id: Ic0048b00f16590fec50bb0858bd3f4498a00650d
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2256269
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below hals since the corresponding functions are same on all
platforms and they are h/w independent
g->ops.gr.enable_ctxsw()
g->ops.gr.disable_ctxsw()
g->ops.gr.reset()
Call the functions directly at all places
Remove CONFIG_NVGPU_DEBUGGER from places where these functions are
called since they are not debugger dependent
This also helps to disable CONFIG_NVGPU_DEBUGGER and to keep recovery
sequence intact
Jira NVGPU-3506
Change-Id: Id2b208ca23dc4667e78edcd8ad242a8558e0ff64
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-compile out nvgpu_pmu members which are not required for
safety buid & modified source as required to support same.
-compile out PMU headers include which are not required for
safety code
-Removed unnecessary PMU header includes from some files
JIRA NVGPU-3418
Change-Id: I5364b1b16c46637d229e82745dd2846cb6335a72
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2128228
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Hal API g->ops.gr.halt_pipe() is defined in unsafe unit hal.gr.gr
It is called from safe unit, and it calls into API
g->ops.gr.falcon.ctrl_ctxsw() which is also safe
Hence get rid of unsafe API g->ops.gr.halt_pipe().
Caller now directly calls hal.gr.falcon API to halt pipe
Jira NVGPU-3506
Change-Id: I5439cb79431795fc7c22384832cf632d6db03316
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127755
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
renamed NVGPU_LS_PMU to NVGPU_FEATURE_LS_PMU to follow
nvgpu naming standard
Compile out LS PMU files when PMU RTOS support is
disabled for safety build by setting NVGPU_LS_PMU
build flag to 0
JIRA NVGPU-3418
Change-Id: Ib09924ac25657e932723c10be573f2f701cb7bea
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127794
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Basic units like fifo, rc are having dependency on
gr_falcon. Avoided outside gr units dependency on gr_falcon
by moving following functions to gr:
int nvgpu_gr_falcon_disable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_disable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_enable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_enable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_halt_pipe(struct gk20a *g); ->
int nvgpu_gr_halt_pipe(struct gk20a *g);
HALs also moved accordingly and updated code to reflect this.
Also moved following data back to gr from gr_falcon:
struct nvgpu_mutex ctxsw_disable_mutex;
int ctxsw_disable_count;
JIRA NVGPU-3168
Change-Id: I2bdd4a646b6f87df4c835638fc83c061acf4051e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100009
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed and moved from fifo_gk20a.c to common/fifo/engines.c
gk20a_fifo_should_defer_engine_reset -> nvgpu_engine_should_defer_reset
Renamed and moved from fifo_gk20a.c to common/fifo/channel.c
gk20a_fifo_deferred_reset -> nvgpu_channel_deferred_reset_engines
JIRA NVGPU-1314
Change-Id: Ifc32ff4dde398143b83c2c1b6fab896142574240
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093910
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create common/fifo/pbdma.c and move pbdma common code:
- nvgpu_pbdma_setup_sw
- nvgpu_pbdma_cleanup_sw
- nvgpu_pbdma_find_for_runlist
- nvgpu_pbdma_init_intr_descs
Moved the following HAL from fifo to pbdma
- fifo.find_pbdma_for_runlist -> pbdma.find_for_runlist
Added the following HALs
- fifo.init_pbdma_map
- pbdma.setup_sw
- pbdma.cleanup_sw
Jira NVGPU-2950
Change-Id: I17802ee61de669c3e17792b4505efb5e2bf530d3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU mutexes used by FIFO and runlists is functionality independent of
the PMU command and message management.
Remove related functionality from pmu_ipc.c and prepare pmu_mutex.c.
Prepare PMU HAL unit that contains gk20a specific PMU mutexes
handling.
JIRA NVGPU-1970
Change-Id: I0204be2ef9d2c000004667af3c18dc527d7ac25f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079142
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move init_ce_engine_info from fifo to hal/engine unit as
implementation is chip specific.
Rename init_ce_engine_info to init_ce_info
Rename gp10b_fifo_init_ce_engine_info to gp10b_engine_init_ce_info
Rename gm20b_fifo_init_ce_engine_info to gm20b_engine_init_ce_info
JIRA NVGPU-1313
Change-Id: Idb9ba3f2550eff6bbe7163d12e48086f47d3f319
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085427
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
