Add below updates to common.gr doxygen:
- Add doxygen comments for APIs that are mentioned in RM SWAD and in
RM-common.gr traceability document.
- Comment about valid ranges for input parameters of bunch of functions.
- Add nvgpu_assert() to ensure correct value is passed as input
parameter to number of functions.
- Add references to relevant functions with @see.
- Update Targets field for unit tests to cover newly doxygenated
functions.
- Update unit test test_gr_init_hal_pd_skip_table_gpc to take care of
new asserts added into some APIs.
Jira NVGPU-6180
Change-Id: Ie889bed96b6428b1fd86dcf30b322944464e9d12
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2469397
(cherry picked from commit 5d7d7e9ce1c4efe836ab842d7962a3aee4e8972f)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2469394
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Starting with nvgpu-next, the ctxsw ucode computes the checksum for each
ctxsw'ed register list, this checksum is saved at the end of the same list;
This entry will be given a special placeholder address 0x00ffffff, which can
be used to distinguish it from other entries in the register list.
There is only one checksum per list, even if it has multiple subunits. Hence,
update "add_ctxsw_buffer_map_entries_subunits" to avoid adding checksum
entires for each subunit within a list.
Bug 2916121
Change-Id: Ia7abedc7467ae8158ce3e791a67765fb52889915
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2457579
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Update gk20a_ctrl_dev_ioctl() to fetch gpu_instance_id with
nvgpu_get_gpu_instance_id_from_cdev() and gr_instance_id with
nvgpu_grmgr_get_gr_instance_id().
Get instance specific GR engine configuration pointer with
nvgpu_gr_get_gpu_instance_config_ptr()
Update gk20a_ctrl_ioctl_gpu_characteristics() to return instance
specific characteristics with below changes :
- 0th GPU instance is a physical instance. Set a limited and relevant
characteristics flags for 0th instance.
For rest of the instances and non-MIG mode, continue fetching flags
with nvgpu_ctrl_ioctl_gpu_characteristics_flags.
- nvgpu_set_preemption_mode_flags() should be set only for non-MIG mode
and non-zero instance in MIG mode.
- In MIG mode, 0th instance does not support any classes. Rest of the
instances support only compute, copy and gpfifo classes.
Non-MIG mode supports all the classes including graphics ones.
- Fetch gpu_instance_id/gr_sys_pipe_id/gr_instance_id from gpu_instance
pointer.
- Fetch max_veid_count_per_tsg from gpu_instance pointer.
Also update nvgpu_gr_get_zcull_ptr() and nvgpu_gr_get_zbc_ptr() to
return instance specific pointers. zcull/zbc are not supported in MIG
mode, this is just for consistency of the code.
Jira NVGPU-5648
Change-Id: I764526061542c48ed87659844e16dd0e0253c588
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2436752
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fuse registers should be queried with physical gpc-id and not the
logical ones. For tu104 and before chips physical gpc-ids are same as
logical for non-floorswept config but for newer chips it may differ.
Also, logical to physical mapping is not present for a floorswept gpc so
query gpc_tpc mask only upto actual gpcs that are present.
Jira NVGPU-6080
Change-Id: I84c4a3c1f256fdd1927f4365af26e9892fe91beb
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417721
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update nvgpu_gr_zbc as:
struct nvgpu_gr_zbc {
struct nvgpu_mutex zbc_lock; /* Lock to access zbc table */
struct zbc_color_table *zbc_col_tbl; /* SW zbc color table pointer */
struct zbc_depth_table *zbc_dep_tbl; /* SW zbc depth table pointer */
struct zbc_stencil_table *zbc_s_tbl; /* SW zbc stencil table pointer */
u32 min_color_index; /* Minimum valid color table index */
u32 min_depth_index; /* Minimum valid depth table index */
u32 min_stencil_index; /* Minimum valid stencil table index */
u32 max_color_index; /* Maximum valid color table index */
u32 max_depth_index; /* Maximum valid depth table index */
u32 max_stencil_index; /* Maximum valid stencil table index */
u32 max_used_color_index; /* Max used color table index */
u32 max_used_depth_index; /* Max used depth table index */
u32 max_used_stencil_index; /* Max used stencil table index */
};
Add global struct nvgpu_gr_zbc_table_indices
struct nvgpu_gr_zbc_table_indices {
u32 min_color_index;
u32 min_depth_index;
u32 min_stencil_index;
u32 max_color_index;
u32 max_depth_index;
u32 max_stencil_index;
};
Currently, hw zbc table registers are written during both
gr_init_setup_sw() and gr_init_setup_hw().
- Modify nvgpu_gr_zbc_load_default_table() to
nvgpu_gr_zbc_load_default_sw_table() to only update sw copy of zbc table
during gr_init_setup_sw().
- Modify nvgpu_gr_zbc_load_table() to write zbc values stored in sw zbc
table to hw registers.
Re-structure zbc function as per zbc type i.e. color, depth and stencil.
Add gr.zbc.init_table_indices() hal to initialize zbc indices. Valid ZBC
table indices start from 1. HW indices start from 0 for color, depth and
stencil tables. Note that the corresponding format registers follow ZBC
index range starting at 1.
- void (*init_table_indices)(struct gk20a *g,
struct nvgpu_gr_zbc_table_indices *zbc_indices);
- Add corresponding functions for legacy chips
- Add zbc color, depth and stencil table size hw defines
- Remove ltc.zbc_table_size() hal
- Update ltc.set_zbc_s_entry(), ltc.set_zbc_color_entry and
ltc.set_zbc_depth_entry() accordingly.
Bug 3122410
Bug 3122649
Change-Id: Ib799991ad35c6613534c0a6eb07f3bf24e600dc5
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417620
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
APIs to set preemption modes right now have config based code to set
default preemption modes or to check if given preemption mode is valid
or not. This makes code unreadable and complex.
Rework nvgpu_gr_obj_ctx_init_ctxsw_preemption_mode() so that it checks
for initial preemption modes in the beginning. If no preemption mode is
passed while allocating context, get default preemption modes with
gops.gr.init.get_default_preemption_modes() and use them.
Rework nvgpu_gr_ctx_check_valid_preemption_mode() so that it is more
readable. Use gops.gr.init.get_supported_preemption_modes() to validate
incoming preemption modes against supported preemption modes.
Log preemption modes getting set in
nvgpu_gr_obj_ctx_set_ctxsw_preemption_mode().
Disable failing unit test. It will need rework according to new code.
Jira NVGPU-5648
Change-Id: Ie1a3e1aeae7826a123e104d9d016f181bea3b271
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2419034
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
common.gr defined a temporary macro NVGPU_GR_NUM_INSTANCES to enable or
disable multiple GR instances from common.gr unit.
Multiple GR instance boot is now verified, so we can remove this
temporary solution.
Note that nvgpu_grmgr_get_num_gr_instances() will return more than 1
instance only if NVGPU_SUPPORT_MIG is enabled.
Update unit tests to set number of syspipes to 1 to allow enumeration
of GR instance by grmgr.
Jira NVGPU-5648
Change-Id: I795901ae516843ae7b6c1794dae0f023a213ab1d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2418377
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following code changes,
1) Added api to get the gr_config per gr_instance_id basis.
2) Added api to covert from gpu_instance_id to gr_instance_id.
3) Modified nvgpu_gr_exec_with_ret_for_instance() utility to handle
generic data return type.
JIRA NVGPU-5662
JIRA NVGPU-5663
Change-Id: I4ab732e15cdbda25672975f99e23b5e5d27decb0
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413195
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros to get current GR instance id and the pointer
nvgpu_gr_get_cur_instance_ptr()
nvgpu_gr_get_cur_instance_id()
This approach makes sure that the caller is getting GR instance pointer
under mutex g->mig.gr_syspipe_lock in MIG mode. Trying to access
current GR instance outside of this lock in MIG mode dumps a warning.
Return 0th instance in case MIG mode is disabled.
Use these macros in nvgpu instead of direct reference to
g->mig.cur_gr_instance.
Store instance id in struct nvgpu_gr. This is to retrieve GR instance
id in functions where struct nvgpu_gr pointer is already available.
Jira NVGPU-5648
Change-Id: Ibfef6a22371bfdccfdc2a7d636b0a3e8d0eff6d9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413140
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gv100_init_hwpm_pmm_register() and gr_gv100_set_pmm_register() right
now assume common chiplet stride for all sys/fbp/gpc and use common API
g->ops.perf.get_pmm_per_chiplet_offset() to get the stride.
Chiplet strides are same for all partitions only by chance, and future
chip might change that.
Hence add and use below 3 separate HALs to get appropriate strides.
g->ops.perf.get_pmmsys_per_chiplet_offset()
g->ops.perf.get_pmmgpc_per_chiplet_offset()
g->ops.perf.get_pmmfbp_per_chiplet_offset()
Also store sys/fbp/gpc perfmon count in struct gk20a after first query
instead of querying them again and again. Querying the counts from HW
is time consuming.
Bug 2510974
Jira NVGPU-5360
Change-Id: I186009221009780d561617c0cd6f535854db585f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413108
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate flag gpu_dbg_gr to enable common.gr specific debugging.
Add this flag to all the existing debug logs that use gpu_dbg_fn or
gpu_dbg_info for debugging. Also add many other debugging logs that
might be helpful in debugging.
Removing debug log in gv11b_gr_init_get_nonpes_aware_tpc() as it dumps
too much data that does not seem useful.
Batch all interrupt enable functions in gr_init_setup_hw() together for
readability.
Jira NVGPU-5648
Change-Id: I0b857650122cdb1f974b452d28c26e7f142baf61
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2411740
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_gr_init_support() right now executes each of its function for each
GR instance separately. Instead of looping for each function, move the
GR engine initialization sequence to a separate gr_init_support_impl()
and execute this function for each instance.
Update below functions to take nvgpu_gr pointer as parameter. These
functions need not worry about GR instance, instead they'll just operate
on provided instance pointer.
gr_init_setup_hw
gr_init_config
gr_init_setup_sw
gr_init_sm_id_config_early
gr_init_ctxsw_falcon_support
Add new static function gr_init_support_finalize() to set the ready
status and invoke waiters. Execute this per GR instance.
gr_init_ecc_init() and nvgpu_cg_elcg_enable_no_wait() are not needed to
be run per instance.
gr_init_ecc_init() will be later updated to allocate meta data for all
instances
Jira NVGPU-5648
Change-Id: Ia6860f2bdfe0080aebf8930266d3f51bfd805e36
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410703
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Get number of SMs from GR instance specific nvgpu_gr_config pointer
instead of global SM count in below functions :
nvgpu_gr_fs_state_init()
gv11b_gr_init_sm_id_config()
Update nvgpu_gr_config_get_gpc_skip_mask() to return 0 in case gpc_index
is greater than available gpc_count. This is not MIG specific, but based
on code review possible even today for existing chips.
See gm20b_gr_init_pd_skip_table_gpc()
Update nvgpu_gr_get_override_ecc_val() to return GR instance specific
value.
Execute gr_init_setup_hw() for each GR instance.
Disable below failing unit tests:
nvgpu_gr_fs_state.test_gr_fs_state_error_injection
nvgpu_gr_init.test_gr_init_hal_config_error_injection
Jira NVGPU-5648
Change-Id: Ie8f1c0c304c634756786d85facf336a5c9ae8195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410702
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Execute gr_init_setup_sw() for each GR instance.
Update all of the functions called from this function to receive
nvgpu_gr pointer explicitly.
Separate out nvgpu_gr_zbc_init() call to gr_init_setup_sw() and rename
gr_init_ctx_and_map_zbc() to gr_init_ctx_bufs() for more clarity.
Call gr_init_ecc_init() from nvgpu_gr_init_support() since this does not
need to be executed per GR instance.
Initialize mutex etc in nvgpu_gr_alloc() for consistency.
Jira NVGPU-5648
Change-Id: I8e990e11458c05c1b53a4d6710cc2ec3545762a8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410701
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Ctxsw state will be lost after gr reset. After gr reset
in recovery sequence, re-initialize ctxsw state to send
below fecs methods:
gr_fecs_method_push_adr_discover_image_size_v()
gr_fecs_method_push_adr_discover_pm_image_size_v()
gr_fecs_method_push_adr_discover_zcull_image_size_v()
gr_fecs_method_push_adr_discover_preemption_image_size_v()
Without these methods sent to ctxsw, fecs will generate
host error interrupts indicating mismatches in ctxsw
image. Above fecs methods needs to be sent even if they
are already sent during golden context creation.
Bug 3109773
Change-Id: I2aeb92da8fa1961903ab95ef90f47906a1bb32c4
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406685
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Expose below two new APIs from common.grmgr unit
nvgpu_grmgr_get_gr_num_gpcs() - get per instance number of GPCs
nvgpu_grmgr_get_gr_gpc_phys_id() - get physical GPC id for MIG engine
local id in corresponding instance
Execute gr_init_config() for each GR instance.
Add gr_config_init_mig_gpcs() to initialize GPC data in case MIG is
enabled. Separate out gr_config_init_gpcs() for legacy GPC data
initialization.
These functions will inititialize below data in struct nvgpu_gr_config:
max_gpc_count
gpc_count
gpc_mask
gpc_tpc_mask[gpc_count]
max_tpc_per_gpc_count
Rest of the values in struct nvgpu_gr_config are either based on above
values, or read from HW after setting GPC PRI window.
In gr_config_alloc_struct_mem(), rename total_gpc_cnt to total_tpc_cnt
since it represents total TPC count and not GPC. Remove use of temp3
variable since it does not give any idea on usage.
Jira NVGPU-5648
Change-Id: I646cac2ddc312e72b241b1b2a0e51a5cce141535
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406390
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_gr_engine_interrupt_mask() earlier returned mask of all GR engine
instance interrupts. During device refactor series, this got changed to
return interrupt of only first instance.
Change this again to return interrupt mask of all the GR engine
instances since common.mc unit does not yet support APIs to enable
interrupt of individual GR instance.
Update nvgpu_gr_get_syspipe_id() API to take gr_instance_id as parameter
instead of struct nvgpu_gr pointer. Definition of struct nvgpu_gr is not
available outside of common.gr unit.
Jira NVGPU-5648
Change-Id: I5320d1515eea6054150dc14706a16475bd650da7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2405409
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Rename gr_init_reset_enable_hw() to gr_init_prepare_hw() since this
function does not actually do reset, but just prepares the HW
after reset for other SW/HW initialization.
Add a new function gr_init_prepare_hw_impl() that executes per-instance
sequence to prepare GR hardware. Execute this inside
nvgpu_gr_exec_with_ret_for_each_instance().
Note that enabling GR engine interrupts in MC is still expected to
be done in one shot hence keep that code outside of
gr_init_prepare_hw_impl()
Remove redundant calls to gops.gr.init.fifo_access() and
enable_gr_interrupts() from gr_init_setup_hw().
gr_init_prepare_hw() does this already and executes before
gr_init_setup_hw()
Jira NVGPU-5648
Change-Id: If0b7207f80c2fb00d894afebce04b06b7b61d432
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2405408
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a new header file <nvgpu/gr/gr_instances.h> that supports below
macros to execute various functions for GR instances
1) nvgpu_gr_exec_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns void.
2) nvgpu_gr_exec_with_ret_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns an error.
3) nvgpu_gr_exec_for_all_instances
Execute a function for all GR instances at once. For this GR remap
window needs to be disabled temporarily.
If CONFIG_NVGPU_MIG is disabled, all above macros will turn into simple
funciton calls.
If CONFIG_NVGPU_MIG is disabled or if runtime flag NVGPU_SUPPORT_MIG is
disabled, all above macros will turn into simple function calls that
configure single GR instance.
Separate out GR engine reset code into new API gr_reset_engine() and
execute it with nvgpu_gr_exec_with_ret_for_each_instance().
PROD values need to be loaded in legacy mode, hence call
nvgpu_cg_init_gr_load_gating_prod() inside
nvgpu_gr_exec_for_all_instances().
Rename gr_init_prepare_hw() to more appropriate
gr_reset_hw_and_load_prod()
Moe gops.gr.init.fifo_access() call to gr_init_reset_enable_hw().
Add new API nvgpu_grmgr_get_gr_syspipe_id() to query GR instance syspipe
id from common.grmgr unit. Add nvgpu_gr_get_syspipe_id() that returns
same value stored in nvgpu_gr struct.
Add cur_gr_instance field to struct nvgpu_gr to track current GR
instance being programmed under remap window.
Jira NVGPU-5648
Change-Id: I86920303427a6e6547ebf195daa37438365bb38e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2403550
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPC reset is right now triggered from common.mc unit for NVGPU_NEXT.
Move the triggers to common code in common.gr unit. This way it is much
more cleaner to handle multiple GR instances (added in subsequent patch)
Hardcode GR engine instance to 0 for now since by default there is only
one GR engine instance.
Jira NVGPU-5648
Change-Id: I3fd4d0a50db5a8c4b3decf1df881af323cea50c1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2403549
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
