The current runlist code assumes a single runlist buffer to hold all TSG
and channel entries. Create separate RL domain and domain memory types
to hold data that is related to only a scheduling domain and not
directly to the runlist hardware; in the future, more than one domains
may exist and one of them is enabled at a time.
The domain is used only internally by the runlist code at this point and
is functionally equivalent to the current runlist memory that houses the
round robin entries.
The double buffering is still kept, although more domains might benefit
from some cleverness. Although any number of created domains may be
edited in runtime, nly one runlist memory is accessed by the hardware at
a time. To spare some contiguous memory, this should be considered an
opportunity for optimization in the future.
Jira NVGPU-6425
Change-Id: Id99c55f058ad56daa48b732240f05b3195debfb1
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618386
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The error path in map_buffer() attempts to unmap a buffer twice to check
that such action does not cause errors. The call site uses a field of a
freed structure in the second call; store that in a local variable to
avoid reading freed memory.
Change-Id: I20fe66cf255dce25b1c4012bda2a6f864daf419a
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2605495
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Improved SDL heartbeat mechanism detects the interrupts triggered by
SW method and treats them as errors. Hence remove the SW method support
completely from safety build. Registers set by SW methods are now set
by default for all the contexts.
Implement new HAL gops.gr.init.set_default_compute_regs() to set the
registers in patch context. Call this HAL while creating each context.
Update gv11b_gr_intr_handle_sw_method() to treat all compute SW methods
as invalid.
Update unit test test_gr_intr_sw_exceptions() so that it now expects
failure for any method/data.
Bug 200748548
Change-Id: I614f6411bbe7000c22f1891bbaf06982e8bd7f0b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2527249
(cherry picked from commit bb6e0f9aa1404f79bcfbdd308b8c174a4fc83250)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602638
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_map_partial() to map a specific size of a buffer
represented by nvgpu_mem, or what nvgpu_gmmu_map() used to do. Delete
the size parameter from nvgpu_gmmu_map() such that it now maps the
entire buffer. The separate size parameter is a historical artifact from
when nvgpu_mem did not exist yet; the typical use is to map the entire
buffer.
Mapping at a certain address with nvgpu_gmmu_map_fixed() still takes the
size parameter.
The returned address still has to be stored somewhere, typically to
mem.gpu_va by the caller so that the matching unmap variant finds the
right address.
Change-Id: I7d67a0b15d741c6bcee1aecff1678e3216cc28d2
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601788
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_unmap_addr() to unmap a nvgpu_mem that was mapped
at some other address than mem.gpu_va, which can be the case for buffers
that are shared across different address spaces. Delete the address
parameter from nvgpu_gmmu_unmap(), as the common case is to store the
address to mem.gpu_va when mapping the buffer.
Modify some instances of consecutive unmap + free calls to call just
nvgpu_dma_unmap_free().
Change-Id: Iecd7c9aa41d04e9f48e055f6bc0c9227cd759c69
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601787
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add Setter and Getter methods for accessing tsg->sm_error_states.
Getter returns a constant pointer for struct nvgpu_tsg_sm_error_state.
This renders it unnecessary to add BVEC for above fields for the struct
in multiple locations. The current design ensures that only a constant
pointer is obtained from the owner unit i.e. FIFO.
The following new methods are added. Both unit tests and BVEC tests
are added for them as well.
nvgpu_tsg_store_sm_error_state
nvgpu_tsg_get_sm_error_state
Jira NVGPU-6947
Change-Id: I82c22a2774862c8579baa41b6fb8292fa164704a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
(cherry picked from commit 79574638671a0c6efe41cd3423668fcd1bd96826)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556938
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
* As of now, working on multiple chip bringup in nvgpu-next repo has
an issue because we end with losing control on source code (hard to
find which part of the code belongs to which chip) and it's valuable
history this affects chip migration on release.
* To support multiple chip bringup simultaneously, we need new
guidelines to avoid losing control on source code and make migration
easier. This change adds links to nvgpu-next repo.
* Updated return code to ENODEV for consistency
* Updated ACR unittest to work with ENODEV return code
NOTE:
These are the initial set of infrastructure changes, guidelines
will evolve, and source code will get updated accordingly.
Based on future chip features, Which part of the source code falls
under nvgpu-next repo is decided.
JIRA NVGPU-6574
Change-Id: I81827e35d189c55554df00e255b527a4473e0338
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556793
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api to translate dmabuf's fmode_t to gk20a_mem_rw_flag
for read only/read write mapping selection.
By default dmabuf fd mapping permission should be a maximum
access permission associated to a particual dmabuf fd.
Remove bit flag MAP_ACCESS_NO_WRITE and add 2 bit values for
user access requests NVGPU_VM_MAP_ACCESS_DEFAULT|READ_ONLY|
READ_WRITE.
To unify map access type handling in Linux and QNX move the
parameter NVGPU_VM_MAP_ACCESS_* check to common function
nvgpu_vm_map.
Set MAP_ACCESS_TYPE enabled flag in common characteristics
init function as it is supported for Linux and QNX.
Bug 200717195
Bug 3250920
Change-Id: I1a249f7c52bda099390dd4f371b005e1a7cef62f
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507150
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update enable_priv_ring testcase to account for
new priv_ring init sequence. Updated test to
check for following three conditions:
- priv ring init passes.
- priv ring init times out waiting for command completion.
- priv ring init fails with enumerate command returning error.
Bug 3307879
Change-Id: Iba8685774241cad4b5792004ef6dcdc3a8690973
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2528616
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new Central Interrupt Controller(CIC) unit in common code.
The interrupt handling is done in a distributed manner currently.
The error handling policy for different errors resides in each unit's
ISR code. The goal is to converge this data under one central place -
the CIC unit.
This patch creates framework for CIC unit and moves the gv11b QNX
safety LUT to CIC unit. All the error reporting APIs from different
units are also moved to CIC.
New APIs are exposed by CIC unit to access its internal data like:
1. Struct err_desc - the static err handling /injection data per
error id
2. Num_hw_modules - the number of error reporting HW units
supported by CIC
Init and deinit of CIC unit:
1. CIC unit should be initialized earlyon during boot so that it
is available for any interrupt handling.
2. Initialize CIC just before the interrupts are enabled during
boot.
3. Similarly, CIC is disabled late during deinit cycle; right
after the interrupts are masked.
LUT:
1. LUT is currently used only for reporting error to safety
services in gv11b QNX safety build.
2. This error handling policy LUT currently has only two levels
of handing - correctable and quiecse.
3. Once, the error handling policy decision is moved from leaf
unit nodes to CIC, LUT will be updated to have additional levels
like fast recovery and full recovery.
4. Also, then a separate LUT will be added for each platform/build.
5. In current framework, the LUT is set to NULL for all
configurations except gv11b.
report_err() ops is added to report error to safety services.
This ops is only effective for gv11b qnx build; and set to NULL for
other configurations.
NVGPU-6521
NVGPU-6523
NVGPU-6750
NVGPU-6758
NVGPU-6760
NVGPU-6754
Change-Id: I24be7836a96d787741e37b732e19863ed8014635
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2518683
Reviewed-by: Ajesh K V <akv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The function gk20a_mm_l2_flush incorrectly returns an error value
when it skips l2_flush when hardware is powered off.
This causes the following prints to occur even when the behavior is expected.
gv11b_mm_l2_flush:43 [ERR] gk20a_mm_l2_flush failed
nvgpu_gmmu_unmap_locked:1043 [ERR] gk20a_mm_l2_flush[1] failed
The above errors occur from the following paths
1) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_pmu_remove_support -> nvgpu_pmu_pg_deinit ->
nvgpu_dma_unmap_free
2) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_remove_mm_support -> gv11b_mm_mmu_fault_info_mem_destroy ->
nvgpu_dma_unmap_free
Since, these do not belong in the Poweron/Poweroff path, its okay to
skip flushing them when the hardware has powered off.
Fixed the userspace tests by allocating g->mm.bar1.vm to prevent NULL access
in gv11b_mm_l2_flush->tlb_invalidate.
Jira LS-77
Change-Id: I3ca71f5118daf4b2eeacfe5bf83d94317f29d446
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2523751
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
All graphics code is under CONFIG_NVGPU_GRAPHICS and all the HALs are
in non-fusa files. In order to support graphics in safety,
CONFIG_NVGPU_GRAPHICS needs to be enabled. But since most of the HALs
are in non-fusa files, this causes huge compilation problem.
Fix this by moving all graphics specific HALs used on gv11b to fusa
files. Graphics specific HALs not used on gv11b remain in non-fusa files
and need not be protected with GRAPHICS config.
Protect call to nvgpu_pmu_save_zbc() also with config
CONFIG_NVGPU_POWER_PG, since it is implemented under that config.
Delete hal/ltc/ltc_gv11b.c since sole function in this file is moved to
fusa file.
Enable nvgpu_writel_loop() in safety build since it is needed for now.
This will be revisited later once requirements are clearer.
Move below CTXSW methods under CONFIG_NVGPU_NON_FUSA for now. Safety
CTXSW ucode does not support these methods. These too will be revisited
later once requirements are clearer.
NVGPU_GR_FALCON_METHOD_PREEMPT_IMAGE_SIZE
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_ZCULL_IMAGE_SIZE
Jira NVGPU-6460
Change-Id: Ia095a04a9ba67126068aa7193f491ea27477f882
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2513675
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
